Comparison of a Rapid Light-Induced and Forced Test to Study the Oxidative Stability of White Wines

The oxidation processes of white wines can occur during storage and commercialization due to several factors, and these can negatively affect the color, aroma, and quality of the wine. Wineries should have faster and simpler methods that provide valuable information on oxidation stability of wines and allow fast decision-making procedures, able to trigger suitable technological interventions. Using a portable prototype instrument for light irradiations at different wavelengths and times was considered and evaluated on sensorial, spectrophotometric, and colorimetric parameters of white wines. The sensorial analysis revealed that white and light blue were the most significant, after only 1 h of irradiation. The experimental results showed that hydrogen peroxide could enhance the effect of light treatment, allowing a contemporary evaluation of the oxidation stability of wine against light and chemical stresses. As expected, a good correlation (R² > 0.89) between optical density at 420 nm and b* parameter was highlighted. The synergic effect of light and H₂O₂ was also studied on the hydrolyzable and condensed tannins’ additions to white wine. The proposed methodology could be used to evaluate the oxidative stability of white wines, but also to evaluate the effect of some oenological adjuvants on wine stability.     

Comparative molecular dynamics and Monte Carlo study of statistical properties for coarse-grained heteropolymers

Employing a simple hydrophobic-polar heteropolymer model, we compare thermodynamic quantities obtained from Andersen and Nosé-Hoover molecular dynamics as well as replica-exchange Monte Carlo methods. We find qualitative correspondence in the results, but serious quantitative differences using the Nosé-Hoover chain thermostat. For analyzing the deviations, we study different parameterizations of the Nosé-Hoover chain thermostat. Autocorrelations from molecular dynamics and Metropolis Monte Carlo runs are also investigated.     

Ring Opening of Pymisyl‐Protected Aziridines with Organocuprates

The pyrimidine‐2‐sulfonyl (pymisyl) group is introduced as a new protecting group that can be used to activate aziridines towards ring opening. It is readily introduced and removed under mild conditions. Regioselective ring opening of pymisyl‐protected 2‐methyl‐aziridine with organocuprates gives the corresponding sulfonamides in high yields, and the pymisyl group can subsequently be removed upon treatment with a thiolate. The versatility of this new nitrogen protecting group is illustrated with a new synthesis of Selegiline, a monoamine oxidase‐B inhibitor marketed for the treatment of Parkinson’s disease.     

On the mechanism of the copper-catalyzed cyclopropanation reaction

The selectivity-determining step in enantioselective copper-catalyzed cyclopropanation with diazo compounds has been studied by experimental and computational methods. The addition of the very reactive metallacarbene intermediate in an early transition state to the substrate alkene is concerted but strongly asynchronous, with substantial cationic character on one alkene carbon in the neighborhood of the transition state. Evidence from isotope effects and Hammett studies supports the nature of the transition state. Formation of a metallacyclobutane intermediate by a [2+2] addition is kinetically disfavored. Ligand-substrate interactions influencing the enantio- and diastereoselectivity have been identified, and the preferred orientation of the alkene substrate during the addition is suggested.     

Splitless on-line coupling of capillary high-performance liquid chromatography,capillary electrochromatography and pressurized capillary electrochromatography with nuclear magnetic resonance spectroscopy

A mixture of unsaturated fatty acid methyl esters was separated with a new splitless capillary set-up. With the employed apparatus configuration different capillary separation techniques such as capillary high-performance liquid chromatography (cHPLC), capillary electrochromatography (CEC) and pressurized capillary electrochromatography (pCEC) could be applied. The detection and identification of the sample compounds were accomplished by hyphenating these capillary separation techniques with nuclear magnetic resonance (NMR) spectroscopy using a novel configuration of the detection capillary set-up. Using modified electrokinetically driven separation techniques, the electric field was applied solely across the separation column. With this improved interface for capillary liquid chromatography-NMR on-line coupling, the stereochemical assignment of the cis and trans configuration of unsaturated fatty acids could be easily accomplished. Finally, the results of cHPLC-NMR, CEC-NMR and pCEC-NMR coupling experiments were compared.Dedicated to Professor Günter Häfelinger on the occasion of his 65th birthday     

Self-Assembly and Fluorescence of Tetracationic Liquid Crystalline Tetraphenylethene

A series of tetraguanidinium tetraphenylethene (TPE) arylsulfonates with different chain lengths was prepared via ionic self-assembly of tetraguanidinium TPE chloride and the respective methyl arylsulfonates. Liquid crystalline properties were studied by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. Tetraguanidinium TPE arylsulfonates with chain lengths of C₈–C₁₂ displayed hexagonal columnar mesophases over a broad temperature range, while derivatives with longer chains showed oblique columnar phases. In solution all compounds displayed aggregation-induced emission behaviour. Temperature-dependent luminescence spectra of the bulk phase of the tetraguanidinium TPE arylsulfonate with C₁₄ side chains revealed a strong luminescence both in the solid state and the oblique columnar mesophase. The emission behaviour was rationalized by a unique combination of restriction of intramolecular rotation of the TPE core, Coulomb interaction between the guanidinium cations and π–π interactions of the anionic arylsulfonate moieties.     

Double N-H bond activation of N,N'-bis-substituted hydrazines with stable N-heterocyclic silylene

The reaction of N-heterocyclic silylene (NHSi) L [L = CH{(C[double bond, length as m-dash]CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] with benzoylhydrazine, 1,2-dicarbethoxyhydrazine, 1,2-diacetylhydrazine and 1,2-bis(tert-butoxycarbonyl)hydrazine in 1 : 1 molar ratio resulted in compounds 1-4 with an almost quantitative yield and five coordinate silicon atoms. Compounds 1-4 were formed by double N-H bond activation by deliberate selection of N,N'-bis-substituted hydrazine compounds bearing the -C(O)NHNH- unit. Compounds 1-4 were characterized by NMR spectroscopy, EI-MS and elemental analysis. The molecular structures of compounds 1-3 were unambiguously established by single crystal X-ray structural analysis.     

Individual strings of conducting carbon cones and discs in a polymer matrix: Electric field‐induced alignment and their use as a strain sensor

We demonstrate micromechanical strain sensors with integrated readout based on carbon nanocones and discs (CNCs) which are aligned into a string‐like formation using an alternating electric field and studied by AC impedance spectroscopy and electromechanical methods. The CNC particles are first dispersed into a polymer matrix with a particle fraction of 0.1 vol %. This value is well below the percolation threshold (～ 2 vol %), which suppresses particle aggregation and facilitates transparency allowing the use of an UV‐curable polymer. Alignment was carried out with a 1 kHz, 4 kV/cm electric field and is a consequence of dielectrophoretic effect. It develops in minutes and makes the initially insulating, nonaligned material conductive. This is followed by UV curing of the polymer matrix, which renders a solid state device. The stretching of the aligned strings in the cured polymer leads to a reversible piezoresistive effect, and a gauge factor of about 50 is observed. This is in a sharp contrast to CNC films with particle fraction above percolation threshold (13 vol %), which are conductive but not sensitive to stretching. The strings are Ohmic in nature and moreover show higher DC conductivity (22–500 S/m) compared to identically prepared carbon black strings (1–22 S/m). © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011