Oxygen adsorption on Pt/Ru(0001) layers

Chemical properties of epitaxially grown bimetallic layers may deviate substantially from the behavior of their constituents. Strain in conjunction with electronic effects due to the nearby interface represent the dominant contribution to this modification. One of the simplest surface processes to characterize reactivity of these substrates is the dissociative adsorption of an incoming homo-nuclear diatomic molecule. In this study, the adsorption of O(2) on various epitaxially grown Pt films on Ru(0001) has been investigated using infrared absorption spectroscopy and thermal desorption spectroscopy. Pt/Ru(0001) has been chosen as a model system to analyze the individual influences of lateral strain and of the residual substrate interaction on the energetics of a dissociative adsorption system. It is found that adsorption and dissociative sticking depends dramatically on Pt film thickness. Even though oxygen adsorption proceeds in a straightforward manner on Pt(111) and Ru(0001), molecular chemisorption of oxygen on Pt/Ru(0001) is entirely suppressed for the Pt/Ru(0001) monolayer. For two Pt layers chemisorbed molecular oxygen on Pt terraces is produced, albeit at a very slow rate; however, no (thermally induced) dissociation occurs. Only for Pt layer thicknesses N(Pt) ≥ 3 sticking gradually speeds up and annealing leads to dissociation of O(2), thereby approaching the behavior for oxygen adsorption on genuine Pt(111). For Pt monolayer films a novel state of chemisorbed O(2), most likely located at step edges of Pt monolayer islands is identified. This state is readily populated which precludes an activation barrier towards adsorption, in contrast to adsorption on terrace sites of the Pt/Ru(0001) monolayer.     

Formation of silicon centered spirocyclic compounds: reaction of N-heterocyclic stable silylene with benzoylpyridine, diisopropyl azodicarboxylate, and 1,2-diphenylhydrazine

Three silicon centered spirocyclic compounds 1-3, possessing silicon fused six- and five-membered rings have been prepared by the reaction of NHSi (L) [L = CH{(C=CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] with benzoylpyridine, diisopropyl azodicarboxylate, and 1,2-diphenylhydrazine, respectively, in a 1:1 ratio. The three spirocyclic compounds (1- 3) were obtained by three different pathways. The reaction of L with benzoylpyridine leads to the activation of the pyridine ring, and dearomatization occurred. Treatment of diisopropyl azodicarboxylate with L favors a [1 + 4]- rather than a [1 + 2]-cycloaddition product, and the azo compound was converted to hydrazone derivative. Finally the reaction of 1,2-diphenylhydrazine and L results in the elimination of hydrogen by activating one of the C-H bonds present in the phenyl ring. All three complexes 1- 3 were characterized by single crystal X-ray structural analysis, NMR spectroscopy, EI-MS spectrometry, and elemental analysis. In addition the optimized structures of probable products and possible intermediates were investigated using density functional theory (DFT) calculations.     

Formation and NMR spectroscopy of ω-thiol protected α,ω-alkanedithiol-coated gold nanoparticles and their usage in molecular charge transport junctions

Gold nanoparticles (AuNPs) coated with stabilizing molecular monolayers are utilized in areas ranging from life sciences to nanoelectronics. Here we present a novel and facile one-pot single phase procedure for the preparation of stable AuNPs with good dispersity, which are coated with α,ω-alkanedithiols whose outer ω-thiol is protected by a triphenylmethyl group. Using dielectrophoresis we were able to trap these AuNPs, coated with ω-thiol protecting groups, in a 20 nm gold electrode nanogap. The ω-thiol group was then deprotected under acidic conditions in situ once the AuNPs were correctly positioned in the device. The subsequent deprotection resulted in an increase of conductance by up to 3 orders of magnitude, indicating that the isolated dithiol-coated AuNPs were fused into a covalently bonded network with AuNP-molecule-AuNP as well as electrode-molecule-AuNP linkages. Furthermore, complete characterization of the AuNP surface-bonded alkanedithiols was achieved using a series of one- and two-dimensional NMR spectroscopy techniques. Our spectra of the molecule-coated AuNPs show well-resolved signals, only slightly broader than for free molecules in solution, which is in contrast to many earlier reported NMR spectral data of molecules attached to AuNPs. Complementary diffusion NMR spectroscopic experiments were performed to prove that the observed alkanedithiols are definitely surface-bonded species and do not exist in free and unattached form.     

Sol–gel processing at increased temperatures: the formation of polyester nanocomposites

Polyester nanocomposites were prepared using sol–gel precursors, prehydrolyzed sols, or nanoparticles in polyester formulations. The different inorganic components were introduced in the early stages of the esterification reaction and a typical polymerization temperature program was applied leading to temperatures up to 240 °C at low pressures. The structural and physical properties of the final materials depend on the applied method for the introduction of the sol–gel materials. Silicon atoms were incorporated into the polyester chain if silicon tetraalkoxide was used as precursor. The silicon atoms represent branching points in the polymer structure. Prehydrolyzed sols that were prepared under acidic conditions were another source of silicon and formed larger inorganic aggregates in the polymer matrix. Nanoparticles prepared via the Stöber process were the third inorganic species in polyester formation. All three processing pathways produced different kinds of materials depending on the type of silica incorporated in the polyester networks but also with regard to the nanoscale structure of the materials. Both, composition and structure have a major influence on the final polyester nanocomposite properties. Model reactions between silicon tetraalkoxides and diols or diacids using the temperature program for the polyester formation showed that exchange reactions of the alkoxides and the alcohols or acids can occur and the obtained products can carry out side reactions in the polyester formation. The final materials show a homogeneous distribution of the silicon containing moieties in the polyester matrix. The viscosities and the branching degrees of the polymers changed dramatically compared to the pristine polymers by incorporation of the sol–gel precursors.     

Syntheses of group 7 metal carbonyl complexes with a stable N-heterocyclic chlorosilylene

Two structurally characterized manganese [L(2)Mn(CO)(4)](+)[Mn(CO)(5)](-) (1) and rhenium [L(3)Re(CO)(3)](+)[ReCO)(5)](-) (2) silylene complexes were prepared in one pot syntheses by reacting 1 equivalent of Mn(2)(CO)(10) with 2 equivalents of stable N-heterocyclic chlorosilylene L {L = PhC(NtBu)(2)SiCl} and 1 equivalent of Re(2)(CO)(10) with 3 equivalents of L in toluene at room temperature. Both complexes 1 and 2 were characterized by single-crystal X-ray structural analysis, NMR and IR spectroscopy, EI-MS spectrometry, and elemental analysis.     

Effect of the addition of a fused donor-acceptor ligand on a Ru(II) complex: synthesis, characterization, and photoinduced electron transfer reactions of [Ru(TTF-dppz)2(Aqphen)]2+

The synthesis and the photophysical properties of the complex [Ru(TTF-dppz)(2)(Aqphen)](2+) (TTF = tetrathiafulvalene, dppz = dipyrido-[3,2-a:2',3'-c]phenazine, Aqphen = anthraquinone fused to phenanthroline via a pyrazine bridge) are described. In this molecular triad excitation into the metal-ligand charge transfer bands results in the creation of a long-lived charge separated state with TTF acting as electron donor and anthraquinone as terminal acceptor. The lifetime of the charge-separated state is 400 ns in dichloromethane at room temperature. A mechanism for the charge separation involving an intermediate charge-separated state is proposed based on transient absorption spectroscopy.     

More on the pressing down game

We investigate the pressing down game and its relation to the Banach Mazur game. In particular we show: consistently, there is a nowhere precipitous normal ideal I on ${\aleph_2}$ such that player nonempty wins the pressing down game of length ${\aleph_1}$ on I even if player empty starts.     

Noncommutative Positivstellensätze for pairs representation-vector

We study non-commutative real algebraic geometry for a unital associative *-algebra A{\mathcal {A}} viewing the points as pairs (π, v) where π is an unbounded *-representation of A{\mathcal A} on an inner product space which contains the vector v. We first consider the *-algebras of matrices of usual and free real multivariate polynomials with their natural subsets of points. If all points are allowed then we can obtain results for general A{\mathcal {A}}. Finally, we compare our results with their analogues in the usual (i.e. Schmüdgen’s) non-commutative real algebraic geometry where the points are unbounded *-representation of A{\mathcal {A}}.     

Trap-assisted recombination in disordered organic semiconductors

The trap-assisted recombination of electrons and holes in organic semiconductors is investigated. The extracted capture coefficients of the trap-assisted recombination process are thermally activated with an identical activation energy as measured for the hole mobility μ(p). We demonstrate that the rate limiting step for this mechanism is the diffusion of free holes towards trapped electrons in their mutual Coulomb field, with the capture coefficient given by (q/ε)μ(p). As a result, both the bimolecular and trap-assisted recombination processes in organic semiconductors are governed by the charge carrier mobilities, allowing predictive modeling of organic light-emitting diodes.     

4‐Trifluoromethyl‐Substituted Coumarins with Large Stokes Shifts: Synthesis,Bioconjugates, and Their Use in Super‐Resolution Fluorescence Microscopy

Bright and photostable fluorescent dyes with large Stokes shifts are widely used as sensors, molecular probes, and light‐emitting markers in chemistry, life sciences, and optical microscopy. In this study, new 7‐dialkylamino‐4‐trifluoromethylcoumarins have been designed for use in bioconjugation reactions and optical microscopy. Their synthesis was based on the Stille reaction of 3‐chloro‐4‐trifluoromethylcoumarins and available (hetero)aryl‐ or (hetero)arylethenyltin derivatives. Alternatively, the acylation of 2‐trifluoroacetyl‐5‐dialkylaminophenols with available (hetero)aryl‐ or (hetero)arylethenylacetic acids followed by intramolecular condensation afforded coumarins with 3‐(hetero)aryl or 3‐[2‐(hetero)aryl]ethenyl groups. Hydrophilic properties were provided by the introduction of a sulfonic acid residue or by phosphorylation of a primary hydroxy group attached at C‐4 of the 2,2,4‐trimethyl‐1,2‐dihydroquinoline fragment fused to the coumarin fluorophore. For use in immunolabeling procedures, the dyes were decorated with an (activated) carboxy group. The positions of the absorption and emission maxima vary in the ranges 413–480 and 527–668 nm, respectively. The phosphorylated dye, 9 ,CH?CH‐2‐py,H, with the 1‐(3‐carboxypropyl)‐4‐hydroxymethyl‐2,2‐dimethyl‐1,2‐dihydroquinoline fragment fused to the coumarin fluorophore bearing the 3‐[2‐(2‐pyridyl)ethenyl] residue (absorption and emission maxima at 472 and 623 nm, respectively) was used in super‐resolution light microscopy with stimulated emission depletion and provided an optical resolution better than 70 nm with a low background signal. As a result of their large Stokes shifts, good fluorescence quantum yields, and adequate photostabilities, phosphorylated coumarins enable two‐color imaging (using several excitation sources and a single depletion laser) to be combined with subdiffractional optical resolution.