Effect of beta-cyclodextrin on the hydrolysis of trifluoroacetate esters

The hydrolysis of p-F, p-Cl, and m-Cl phenyl trifluoracetates was studied in the presence of beta-cyclodextrin (beta-CD). The reactions are inhibited by beta-CD at pH 6 while they are catalyzed in alkaline solution. MM3 calculations reproduce some of the experimental results. The substrates form inclusion complexes with beta-CD which are of similar stability as those of the corresponding acetates; however, the association of the transition state is less favorable in these reactions than in those of the acetates, and consequently less stronger catalysis is observed.     

TOPS-MODE based QSARs derived from heterogeneous series of compounds. Applications to the design of new herbicides

A new application of TOPological Sub-structural MOlecular DEsign (TOPS-MODE) was carried out in herbicides using computer-aided molecular design. Two series of compounds, one containing herbicide and the other containing nonherbicide compounds, were processed by a k-Means Cluster Analysis in order to design the training and prediction sets. A linear classification function to discriminate the herbicides from the nonherbicide compounds was developed. The model correctly and clearly classified 88% of active and 94% of inactive compounds in the training set. More specifically, the model showed a good global classification of 91%, i.e., (168 cases out of 185). While in the prediction set, they showed an overall predictability of 91% and 92% for active and inactive compounds, being the global percentage of good classification of 92%. To assess the range of model applicability, a virtual screening of structurally heterogeneous series of herbicidal compounds was carried out. Two hundred eighty-four out of 332 were correctly classified (86%). Furthermore this paper describes a fragment analysis in order to determine the contribution of several fragments toward herbicidal property; also the present of halogens in the selected fragments were analyzed. It seems that the present TOPS-MODE based QSAR is the first alternate general "in silico" technique to experimentation in herbicides discovery.     

Molecular batteries: ferrocenylsilylation of dendrons, dendritic cores, and dendrimers: new convergent and divergent routes to ferrocenyl dendrimers with stable redox activity

The ferrocenylsilylation of the phenol triallyl dendron 2, of the phenol nonaallyl dendron 4, and of the 9-, 27-, 81-, and 243-allyl dendrimers 7-10 (monitored by the disappearance of the signals of the olefinic protons in 1H NMR spectra) has been achieved using ferrocenyldimethylsilane 1 and Karstedt's catalyst in diethyl ether at 40 degrees C, yielding the corresponding ferrocenyl dendrons and dendrimers. An alternative convergent synthesis of the nonaferrocenyl dendron 5 was carried out by reaction of the triferrocenyl dendron 2 with a protected triododendron followed by deprotection. Reaction of the nonaferrocenyl dendron 5 with hexakis(bromomethyl)benzene gave the 54-ferrocenyl dendron 6. All the ferrocenyl dendron and dendrimers produce a chemically and electrochemically reversible ferrocenyl oxidation wave at seemingly the same potential. Stable platinum electrodes modified with the high ferrocenyl dendrimers were fabricated. The soluble orange-red ferrocenyl dendrimers can also be oxidized in CH2Cl2 by [NO][PF6] to the insoluble deep blue polyferrocenium dendrimers. For instance, the 243-ferrocenium dendrimer has been characterized by its Mossbauer spectrum, which is of the same type as that of ferrocenium itself. The ferrocenium dendrimers can be reduced without any decomposition back to the ferrocenyl dendrimer, indicating that these multielectronic redoxstable dendrimers behave as molecular batteries.     

Application of relaxation periods during electrodialysis of a casein solution: Impact on anion-exchange membrane fouling

Electrodialysis (ED) is a membrane process used on a large scale. However, one of the common problems is fouling of ion-exchange membranes stacked in the cell. The use of pulsed power, consisting in applying a constant current density during a fixed time of application (T_on) followed by a pause duration (T_off), was demonstrated recently as an effective fouling mitigation method for electrodialysis. Up until now, no work has investigated the potential of electrodialysis using pulsed electric field on protein fouling. The aim of the present work was to study the influence of pulsed electric field (PEF) with a low frequency square shaped periodic signal (T_on = 10 s–T_off = 10 s, T_on = 10 s–T_off = 40 s) in comparison with dc current during electrodialysis of a casein solution at different current densities (10, 20 and 30 mA/cm²) on membrane fouling. It appeared from these results that PEF, under certain conditions of pulse, would avoid fouling on anion-exchange membranes. For 10 s–40 s pulsed electric field conditions, no fouling was observed with any density, while for 10 s–10 s PEF conditions, fouling appeared only at current density over 10 mA/cm². dc current, whatever the current density conditions, led to a fouling on the diluate side of the AEM. Furthermore, when fouling occurred, magnitude layer thickness and dry weight increased with the applied current density. The nature of the fouling was identified as 97% protein. The protein fouling would be due to the dissociation of water molecules and/or heat increase at the anion-exchange membrane interface. The relaxation time of the pulse would limit both phenomena on the membrane.     

Resolving overlapping peaks in ARXPS data: The effect of noise and fitting method

Peak-fitting of X-ray photoelectron spectroscopy (XPS) data can be very sensitive to noise when the difference on the binding energy among the peaks is smaller than the width of the peaks. This sensitivity depends on the fitting algorithm. Angle-resolved XPS (ARXPS) analysis offers the opportunity of employing the combined information contained in the data at the various angles to reduce the sensitivity to noise. The assumption of shared peak parameters (center and width) among the spectra for the different angles, and how it is introduced into the analysis, plays a basic role. Sequential fitting is the usual practice in ARXPS data peak-fitting. It consist on first estimating the center and width of the peaks from the data acquired at one of the angles, and then using those parameters as a starting approximation for fitting the data for each of the rest of the angles. An improvement of this method consists of averaging the centers and widths of the peaks obtained at the different angles, and then employing these values to assess the areas of the peaks for each angle. Another strategy for using the combined information is by assessing the peak parameters from the sum of the experimental data. The complete use of the combined information contained in the data-set is optimized by the simultaneous fitting method. It consists of the assessment of the center and width of the peaks by fitting the data at all the angles simultaneously. Computer-generated data was employed to compare the sensitivity with respect to noise between the sequential, averaged-sequential, sum, and simultaneous fitting methods. It is shown that the latter is significantly more robust and could provide reliable results even for noisy data and small peak separation. The fundamentals for the robustness of the simultaneous method are discussed, as well as the possibility of fitting many parameters at the same time. As an added feature of ARXPS, it was found that the estimation of the error intervals on the peak parameters is done remarkably more precisely by employing XPS data at various angles.     

Synthesis and characterization of Pd(II) complexes of 2‐ and 3‐thiophenecarbaldehyde immobilized on silica obtained from sepiolite

Silica obtained by acid treatment of sepiolite was used as a support for catalysts consisting of palladium complexes of 2‐ and 3‐thiophenecarbaldehyde. The support and the catalysts were characterized by X‐ray diffraction, and solid‐state ²⁹Si and ¹³C nuclear magnetic resonance spectroscopies. The supported palladium catalysts were used in the Suzuki reaction of bromobenzene with phenylboronic acid. Copyright © 2013 John Wiley & Sons, Ltd.     

5‐Methyl‐N‐[2‐nitro‐4‐(trifluoromethyl)phenyl]‐1H‐pyrazole‐3‐amine: a chain of hydrogen‐bonded R22(6) and R22(16) rings

The molecular skeleton of the title compound, C₁₁H₉F₃N₄O₂, is almost planar and exhibits a polarized (charge‐separated) electronic structure in the nitroaniline portion. Molecules are linked by N—H...N and C—H...O hydrogen bonds to form a chain in which centrosymmetric R₂²(6) and R₂²(16) rings alternate.     

Flash DSC crystallization study for blown film grade bimodal HDPE resins. I. Isothermal kinetics and its application of the blown film modeling

Isothermal ultra‐cooling crystallization tests were conducted on three blown film grade bimodal HDPE resins using an ultrafast scanning calorimeter, the Flash DSC. Isothermal tests were performed to study the regime transition, the thermal nucleation and the spherulitical growth using the Hoffman‐Lauritzen theory in a range between 90 °C and 116 °C. Temperature profile estimations using such data were in good agreement with actual blown film process data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2425–2431