The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

Derivatives of 2-thiohydantoin as spectrophotometric analytical reagents. III

Summary The synthesis, characteristics, properties and reactions with metallic ions of the furfural-, thiophenal-, pyrrolal-, cinnamal-, acetal-, and propional-derivatives of 2-thiohydantoin have been studied. The reagents exhibit twopK values in aqueous solution, and sensitive colour reactions with Pd(II), Cu(I) and (II), Ag(I) and Hg(II). A comparison has been made of the reactivity of all the 2-thiohydantoin derivatives we have studied to date and conclusions have been drawn regarding the influence of the aromatic ring connected to 2-thiohydantoin.

---

Derivative des 2-Thiohydantoins als spektrophotometrische Reagenzien. III

Zusammenfassung Die Synthese, die Kennzahlen, die Eigenschaften der Furfural-, Thiophenal-, Pyrrolal-, Acetal-, Propional- sowie des Zimtsäurealdehyd-Derivates des 2-Thiohydantoins und deren Reaktionen mit Metallionen wurden untersucht. In wäßriger Lösung kommen diesen Reagenzien zwei pK-Werte zu. Sie geben empfindliche Farbreaktionen mit Pd(II), Cu(I) und (II), Ag(I) und Hg(II). Die Reaktivität der genannten Derivative wurde untersucht und der Einfluß des mit 2-Thiohydantoin verbundenen aromatischen Ringes daraus ermittelt.

     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

New physically adsorbed polymer coating for reproducible separations of basic and acidic proteins by capillary electrophoresis

In this work, a new physically adsorbed coating for capillary electrophoresis (CE) is presented. The coating is based on a N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EPyM) copolymer synthesized in our laboratory. The capillary coating is simple and easy to obtain as only requires flushing the capillary with a polymer aqueous solution for 2 min. It is shown that by using these coated capillaries the electrostatic adsorption of a group of basic proteins onto the capillary wall is significantly reduced allowing their analysis by CE. Moreover, the DMA-EPyM coating provides reproducible separations of the basic proteins with RSD values for migration times lower than 0.75% for the same day (n = 5) and lower than 3.90% for three different days (n = 15). Interestingly, the electrical charge of the coated capillary wall can be modulated by varying the pH of the running buffer which makes possible the analysis of basic and acidic proteins in the same capillary. The usefulness of this coating is further demonstrated via the reproducible separation of whey (i.e. acidic) proteins from raw milk. The coating protocol should be compatible with both CE in microchips and CE-MS of different types of proteins.     

Cyclopentadienyl substituent effects on reductive elimination reactions in group 4 metallocenes: kinetics,mechanism, and application to dinitrogen activation

The rate of reductive elimination for a family of zirconocene isobutyl hydride complexes, Cp(CpR(n)())Zr(CH(2)CHMe(2))H (Cp = eta(5)-C(5)Me(5), CpR(n)() = substituted cyclopentadienyl), has been measured as a function of cyclopentadienyl substituent. In general, the rate of reductive elimination increases modestly with the incorporation of sterically demanding substituents such as [CMe(3)] or [SiMe(3)]. A series of isotopic labeling experiments was used to elucidate the mechanism and rate-determining step for the reductive elimination process. From these studies, a new zirconocene isobutyl hydride complex, Cp' '(2)Zr(CH(2)CHMe(2))(H) (Cp' ' = eta(5)-C(5)H(3)-1,3-(SiMe(3))(2)), was designed and synthesized such that facile reductive elimination of isobutane and activation of dinitrogen was observed. The resulting dinitrogen complex, [Cp' '(2)Zr](2)(mu(2), eta(2),eta(2)-N(2)), has been characterized by X-ray diffraction and displays a bond length of 1.47 A for the N(2) ligand, the longest observed in any metallocene dinitrogen complex. Solution magnetic susceptibility demonstrates that [Cp' '(2)Zr](2)(mu(2), eta(2), eta(2)-N(2)) is a ground-state triplet, consistent with two Zr(III), d(1) centers. Mechanistic studies reveal that the dinitrogen complex is derived from the reaction of N(2) with the resulting cyclometalated zirconocene hydride rather than directly from reductive elimination of alkane.     

Optimized determination of calcium in grape juice,wines, and other alcoholic beverages by atomic absorption spectrometry

This paper describes a study of the different methods of sample preparation for the determination of calcium in grape juice, wines, and other alcoholic beverages by flame atomic absorption spectrometry; results are also reported for the practical application of these methods to the analysis of commercial samples produced in Spain. The methods tested included dealcoholization, dry mineralization, and wet mineralization with heating by using different acids and/or mixtures of acids. The sensitivity, detection limit, accuracy, precision, and selectiviy of each method were established. Such research is necessary because of the better analytical indexes obtained after acid digestion of the sample, as recommended by the European Union, which advocates the direct method. In addition, although high-temperature mineralization with an HNO3-HCIO4 mixture gave the best analytical results, mineralization with nitric acid at 80 degrees C for 15 min gave the most satisfactory results in all cases, including those for wines with high levels of sugar and beverages with high alcoholic content. The results for table wines subjected to the latter treatment had an accuracy of 98.70-99.90%, a relative standard deviation of 2.46%, a detection limit of 19.0 microg/L, and a determination limit of 31.7 microg/L. The method was found to be sufficiently sensitive and selective. It was applied to the determination of Ca in grape juice, different types of wines, and beverages with high alcoholic content, all of which are produced and widely consumed in Spain. The values obtained for Ca were 90.00 +/- 20.40 mg/L in the grape juices, 82.30 +/- 23.80 mg/L in the white wines, 85.00 +/- 30.25 mg/L in the sweet wines, 84.92 +/- 23.11 mg/L in the red wines, 85.75 +/- 27.65 mg/L in the rosé wines, 9.51 +/- 6.65 mg/L in the brandies, 11.53 +/- 6.55 mg/L in the gin, 7.3 +/- 6.32 mg/L in the pacharán, and 8.41 +/- 4.85 mg/L in the anisettes. The method is therefore useful for routine analysis in the quality control of these beverages.     

Study of the first nucleation steps of thin films by XPS inelastic peak shape analysis

The initial steps in the formation of thin films have been investigated by analysis of the peak shape (both inelastic background and elastic contributions) of X‐ray photoelectron spectra. Surface coverage and averaged height of the deposited particles have been estimated for several overlayers (nanometre range) after successive deposition cycles. This study has permitted the assessment of the type of nucleation and growth mechanisms of the films. The experiments have been carried out in situ in the preparation chamber of an XPS spectrometer. To check the performance of the method, several materials (i.e. cerium oxide, vanadium oxide and cadmium sulfide) have been deposited on different substrates using a variety of preparation procedures (i.e. thermal evaporation, ion beam assisted deposition and plasma enhanced chemical vapour deposition). It is shown that the first deposited nuclei of the films are usually formed by three‐dimensional particles whose heights and degree of surface coverage depend on the chemical characteristics of the growing thin film and substrate materials, as well as the deposition procedure. It is concluded that XPS peak shape analysis can be satisfactorily used as a general method to characterize morphologically the first nanometric moieties that nucleate a thin film. Copyright © 2006 John Wiley & Sons, Ltd.     

Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Magnetic properties of biacetyldihydrazone complexes

Summary Magnetic susceptibilities of the biacetyldihydrazone (BdH) complexes [M(BdH)₃](NO₃)₂ (M = Co^II, Ni^II, Cu^II or Zn^II), [Fe(BdH)₃](NO₃)₃, [M(BdH)₃](Ni(dto)₂] (M = Co^II, Ni^II or Zn^II; dto = dithiooxalate), [(BdH)₂Cu(dto)Ni(dto)] and [Fe(BdH)₃]₂[Ni(dto)₂]₃ have been studied in the 4.2–295 K range. Zn^II complexes are diamagnetic, and complexes of Ni^II, Cu^II and Fe^III obey the Curie-Weiss law. The Co^II complexes behave anomalously and the results are interpreted in terms of a high spinlow spin equilibrium.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.