pH Tailoring Electrical and Mechanical Behavior of Polymer–Clay–Nanotube Aerogels

Aerogels are low density (<0.1 g · cm⁻³), highly porous materials that are especially interesting for insulating applications. Combinations of clay and water‐soluble polymers are commonly used to produce aerogels, but these materials are often mechanically weak. Single‐walled carbon nanotubes (SWNT) were combined with clay and found to significantly improve mechanical behavior and impart electrical conductivity to these aerogels. Poly(acrylic acid) (PAA) as the matrix polymer provides a means of tailoring the electrical conductivity and mechanical behavior by altering the pH of the aqueous aerogel precursor suspensions prior to freeze drying. An aerogel, made from a pH 9 aqueous suspension containing 0.5 wt.‐% PAA, 5 wt.‐% clay, and 0.05 wt.‐% SWNT, has a compressive modulus of 373 kPa. In the absence of nanotubes, this modulus is reduced to 43 kPa. Reducing suspension pH to 3, prior to freeze drying, also reduces modulus for these aerogels, but electrical conductivity is increased when nanotubes are present. It was found that bundled nanotubes provide better reinforcement for these low‐density composites, which may provide some new insight into the use of nanotubes in materials that will be exposed to compressive loading.

     

Cyclopentadienyl substituent effects on reductive elimination reactions in group 4 metallocenes: kinetics,mechanism, and application to dinitrogen activation

The rate of reductive elimination for a family of zirconocene isobutyl hydride complexes, Cp(CpR(n)())Zr(CH(2)CHMe(2))H (Cp = eta(5)-C(5)Me(5), CpR(n)() = substituted cyclopentadienyl), has been measured as a function of cyclopentadienyl substituent. In general, the rate of reductive elimination increases modestly with the incorporation of sterically demanding substituents such as [CMe(3)] or [SiMe(3)]. A series of isotopic labeling experiments was used to elucidate the mechanism and rate-determining step for the reductive elimination process. From these studies, a new zirconocene isobutyl hydride complex, Cp' '(2)Zr(CH(2)CHMe(2))(H) (Cp' ' = eta(5)-C(5)H(3)-1,3-(SiMe(3))(2)), was designed and synthesized such that facile reductive elimination of isobutane and activation of dinitrogen was observed. The resulting dinitrogen complex, [Cp' '(2)Zr](2)(mu(2), eta(2),eta(2)-N(2)), has been characterized by X-ray diffraction and displays a bond length of 1.47 A for the N(2) ligand, the longest observed in any metallocene dinitrogen complex. Solution magnetic susceptibility demonstrates that [Cp' '(2)Zr](2)(mu(2), eta(2), eta(2)-N(2)) is a ground-state triplet, consistent with two Zr(III), d(1) centers. Mechanistic studies reveal that the dinitrogen complex is derived from the reaction of N(2) with the resulting cyclometalated zirconocene hydride rather than directly from reductive elimination of alkane.     

Stereoselective enzymatic synthesis of monoglucosyl-myo-inositols with in vivo anti-inflammatory activity

The monoglucosyl-inositols α-d-glucopyranosyl-(1→4)-4d-myo-inositol 3 and α-d-glucopyranosyl-(1→1)-1d-myo-inositol 4 were synthesized by a combined enzymatic transglucosylation and hydrolysis strategy, using cyclodextrin glucosyl transferase (CGTase) from Thermoanaerobacter sp., followed by hydrolysis with Aspergillus niger glucoamylase. The glucosides were separated by preparative HPLC and fully characterized by extensive 1D and 2D NMR studies. The structure of the regioisomer 4 was confirmed by X-ray crystallography of its perbenzoylated derivative 4a. Both isomers demonstrated in vivo anti-inflammatory activity at comparative levels to corticosterone on mouse ear oedema induced by 12-O-tetradecanoylphorbol-13-acetate (TPA) and in rat hind paw oedema induced by carrageenan.     

Further Insight into the Photostability of the Pyrene Fluorophore in Halogenated Solvents

Pyrene fluorophores of pyrene‐functionalized CdSe quantum dots (QD@Py), as well as alkylpyrene and pyrene itself (Py), undergo fast degradation in aerated chloroform under ultraviolet‐A (UV‐A, 316<λ<400 nm) illumination. Steady‐state fluorescence studies of irradiated chloroform solutions of QD@Py show formation of new bands, red‐shifted compared to that of the pyrene moiety. Similar behaviour is observed for pyrene and the alkylpyrene system. Column chromatography of the pyrene photolysate in chloroform allowed us to isolate photoproducts arising from pyrene degradation, and to obtain information on the structure of the photoproducts responsible for the emission bands. The most predominant photoproducts were those originating from the reaction of pyrene with dichloromethyl radicals. The phototransformation of QD@Py and the alkylpyrene involves mainly detachment of the alkyl chain from the aromatic ring, induced also by dichloromethyl radicals, and oxidation of the alkyl chain at the benzylic position was detected as well. By contrast, these pyrene systems show a high photostability in aerated dichloromethane. Transient absorption measurements showed formation of both pyrene triplet and pyrene radical cation for all pyrene systems in these halogenated solvents. The yield of pyrene radical cations for Py is higher than for QD@Py and the alkylpyrene. In addition, pyrene radical cations were longer‐lived in dichloromethane than in chloroform. The reason for the pyrene photostability in dichloromethane is the different reactivity of chloromethyl and dichloromethyl radicals towards pyrene and oxygen. These studies show that the use of dichloromethane can be a suitable alternative to chloroform when the good solubility properties of these halogenated solvents are needed to dissolve pyrene when this chromophore is used as a fluorescent probe.     

Dual role of (-)-sparteine in the palladium-catalyzed aerobic oxidative kinetic resolution of secondary alcohols

The mechanistic details of the palladium-catalyzed aerobic oxidative kinetic resolution of secondary alcohols have been elucidated. (-)-Sparteine was found to have a dual role as a chiral ligand and an exogenous base. Saturation kinetics were observed for the dependence on (-)-sparteine concentration. A first-order dependence on [alcohol] and [catalyst] as well as inhibition by addition of (-)-sparteine HCl were observed. These results are consistent with rate-limiting deprotonation under low (-)-sparteine concentrations and rate-limiting beta-hydride elimination using saturating (-)-sparteine concentrations. This conclusion is further supported by a kinetic isotope effect of 1.31 +/- 0.04 under saturation. The enantioselectivity events are also controlled by addition of (-)-sparteine in which high concentrations afford a more selective kinetic resolution.     

FeCp]+-induced hexafunctionalization of hexamethylbenzene with dendrons for the direct synthesis of redox-active iron-centered metallodendrimers

Phenol tri- and nonaallyl dendrons (3 and 7, respectively) were functionalized at the focal position to give the new triallyl dendrons 4 and 6 and the nonaallyl dendrons 11 and 13 that contain a iodoalkyl or a bromobenzyl termini. All these dendrons were used for the [FeCp]+-induced hexafunctionalization of hexamethylbenzene in [FeCp(eta6-C6Me6)][PF6] (1) under mild conditions in the presence of KOH. These reactions directly yielded the 18-allyl and 54-allyl dendrimers 9, 10, and 14 with a [FeCp(eta6-arene)]+ unit located at the dendrimer core. Cyclic voltammetry studies were recorded in THF and DMF with these metallodendrimers and compared with those of analogous dendrimers or complexes of smaller size that contain a [FeCp(eta6-arene)]+ unit at the core. The decreased rate of heterogeneous electron transfer when the dendritic size increases first disclosed by Diederich and Gross is confirmed. The variation of the redox potential of the Fe(II/I) redox system with increasing dendritic size is negligible even in a solvent of high dielectric constant such as DMF. This trend is attributed to fact that the involved "redox" orbital is buried on the metal center, well protected by the shell of alkyl chains (electron-reservoir nature), unlike in ferrocene. The chemical irreversibility increases in THF as the dendrimer size increases, due to more facile ligand substitution with THF at the 19-electron level when the chain bulk increases.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.     

Fabrication and characterization of polymer-based magnetic composite nanotubes and nanorods

Herein we present the simple fabrication of magneto-polymer nanostructured composites. Specifically, large aspect ratio polymer-based magnetic nanotubes and nanorods have been prepared by means of wetting nanoporous hard templates with loaded polymer melts and solutions, respectively. Morphological characteristics of both one-dimensional composite nanostructures were evaluated by scanning electron microscopy. Moreover, important parameters of the materials such as elemental composition and distribution of the metallic elements were determined by means of X-ray diffraction, and Rutherford backscattering. The different confinement topology of the nanoparticles within the nanorods and the nanotubes leads to a stronger (i.e. ferro-) magnetic response of nanotube arrays, as determined by magnetometry. The magnetic measurements also allowed estimating the concentration of nanoparticles by means of properly fitting experimental data to a sum of different magnetic contributions to the total magnetic moment. The morphological, structural, compositional and magnetic characteristics of nanotubes and nanorods are related to the different wetting approaches used. It has to be noted that, to our knowledge, we present here the first example of nanoparticulated polymer-based composite nanotubes synthesized from the melt, which, indeed seems to be at the origin of their high morphological and compositional quality. The potential of Rutherford backscattering spectroscopy for characterizing soft composite nanostructures has to be also remarked.     

Regioselective synthesis of fused pyrazolo[1,5-a]pyrimidines by reaction of 5-amino-1H-pyrazoles and β-dicarbonyl compounds containing five-membered rings

Reactions of 3-substituted-5-amino-1H-pyrazoles with 2-acetylcyclopentanone or 2-ethoxycarbo-nylcyclopentanone lead to the regioselective formation of a new series of cyclopentapyrazolo[1,5-a]pyrimidines in good yields. When 2-acetylbutyrolactone was used, the reaction provided 6-(2-hydroxyethyl)pyrazolo[1,5-a]pyrimidinone and/or the intermediate (3Z)-3-{1-[(5-R-1H-pyrazol-3-yl)amino]ethylidene}-4,5-dihydrofuranone. This indicates that the cyclization proceeds with butyrolactone ring opening as the last step. Several aspects of this regioselective reaction, including mechanistic and structural studies, are considered.