Swelling and Gelation Time Behavior of Sulfonated Polyacrylamide/Chromium Triacetate Hydrogels

A hydrogel was prepared by crosslinking of aqueous solutions of sulfonated polyacrylamide/chromium triacetate for use in water shut-off operations in oil reservoirs. The effects of pH, salinity, retarder and temperature, as well as co-polymer and crosslinker concentration, on the gelation time were investigated. The results indicated that as temperature increased, gelation occurred more rapidly. The activation energy was measured as about 86 kJ/mol. The effects of initial pH and retarder on the gelation time were also examined. The results showed that addition of retarder and increasing of pH increased and decreased the gelation time, respectively. The increase of co-polymer concentration in solution increased the gel swelling. However, the increase of crosslinker concentration decreased the gel swelling. In the presence of electrolytes, the gel swelling decreased by about 80%. Finally, some usable practical recommendations are offered for the gelling systems in reservoirs.     

A fluorescent probe for detecting thiamine using the luminescence intensity of nanoparticles

Determination of molecules and biomolecules using nanoparticles is promising in the development of analytical techniques. Modified Eu-doped Y₂O₃ nanoparticles (Y₂O₃:Eu NPs) by captopril have been used as a probe for thiamine (vitamin B₁) determination. According to the fluorescence enhancement of modified Eu-doped Y₂O₃ nanoparticles caused by thiamine, a simple and sensitive method were proposed for its detection. The increase in modified Y₂O₃:Eu NPs fluorescence signal as a function of thiamine concentration was found to be linear in the concentration range of 0–44 μM. The limit of detection (LOD) of thiamine by this method was 0.144 μM. All the measurements were performed in natural pH, at the room temperature under ambient conditions. Possible interaction mechanism was discussed.     

Graphene-based electronic spin lenses

We theoretically demonstrate the capability of a ferromagnetic-normal interface in graphene to focus an electron wave with a certain spin direction. The essential feature is the negative refraction Klein tunneling, which is spin resolved when the exchange energy of ferromagnetic graphene exceeds its Fermi energy. Exploiting this property, we propose a graphene normal-ferromagnetic-normal electronic spin lens through which an unpolarized electronic beam can be collimated with a finite spin polarization. Our study reveals that magnetic graphene has the potential to be the electronic counterpart of the recently discovered photonic chiral metamaterials that exhibit a negative refractive index for only one direction of the circular polarization of the photon wave.     

Molecular parameterization and determination of the electrode potentials of anticoagulant derivatives: Electrochemical and quantum chemical study

This research presents calculations and computation of two anticoagulant derivatives electrode potentials in methanol. For this purpose, the ab initio molecular orbital calculations (HF) and density functional theory (DFT) together with the 6-31G(d) basis set were utilized. The calculated values were compared with the experimental values obtained by linear sweep voltammetry. The observed and the calculated changes in the reduction potential of the anticoagulant derivatives differed from those of the reference compound (catechol), being less than 20 mV. In this way, a method was provided, by which the reduction potentials of the related molecules could be predicted very accurately. Actually, the resulting data illustrated that the method was likely to be useful for the prediction of biomolecules electrode potentials in different aprotic solvents. The bond lengths, bond angles and dipole moment of the studied compounds were calculated in two different solvents and the solvent effects were discussed.     

Functional monomers and polymers 159 synthesis and photochemical reactions of polymers containing thymine photodimer units in the main chain

Polyamides containing thymine photodimer units in the main chain were synthesized, and their photolysis by ultraviolet irradiation below 260 nm were studied in film state. Photodimers of thymine derivatives were obtained by photochemical reaction of the carboxylic acid derivatives of thymine in aqueous solution irradiated above 270 nm. An attempt was made to resolve the isomers of the photodimers, and the two kinds of cis isomers [cis–syn(head to head), and cis–anti(head to tail)] were isolated successfully. The polyamides were prepared by condensation of the photodimers with diamine using an activated ester method. The photodissociation of the thymine photodimer in the polymer main chain caused the breakage of the polymer chains, leading to the production of oligomers and dimer compounds containing thymine bases at the ends of the molecule. The dissociation rate of the polymer did not depend on the kind of the thymine photodimer which was in the main chain of the polymer.     

Experimental and quantum chemical study on the IR, UV and electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde

Electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde (DPDB) in methanol have been calculated theoretically. For the achievement of this task, the density functional theory (B3LYP/6-31G(d)) was employed with the inclusion of the entropic and thermochemical corrections to yield the free energies of the redox reactions. The electrode potential was also obtained experimentally by means of an electrochemical technique (cyclic voltammetry). The geometric parameters, the vibrational frequency values and the UV spectrum of DPDB and 2-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-5,6-dioxocyclohexa-1,3-dienecarbaldehyde (DPDD is the oxidized form of DPDB), were computed using the same methods. The calculated IR spectrum of DPDB, used for the assignment of the IR frequencies, was observed in the experimental FT-IR spectrum. The correlation between the theoretical and experimental DPDB vibrational frequencies was 0.996. This agreement mutually verified the accuracy of the experimental method and the validity of the applied mathematical model.     

A Novel Method for the Synthesis of Spiro[indoline‐Pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]triones by Alum as a Reusable Catalyst

Synthesis of spiro[indoline‐pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]trione derivatives by a cyclo‐condensation reaction of indolin‐2‐ones, barbituric acids, and 1,3‐diphenyl‐1H‐pyrazol‐5‐amines with the ionic liquid as an effective green reaction media and in the presence of Alum as a reusable catalyst was reported. Excellent yields of products, green media, use of a reusable catalyst, and short reaction time are the main advantages of this new method.     

Phase transition and thermodynamic stability in extended phase space and charged Hořava–Lifshitz black holes

For charged black holes in Ho?ava–Lifshitz gravity, a second order phase transition takes place in extended phase space where the cosmological constant is taken as thermodynamic pressure. We relate the second order nature of phase transition to the fact that the phase transition occurs at a sharp temperature and not over a temperature interval. Once we know the continuity of the first derivatives of the Gibbs free energy, we show that all the Ehrenfest equations are readily satisfied. We study the effect of the perturbation of the cosmological constant as well as the perturbation of the electric charge on thermodynamic stability of Ho?ava–Lifshitz black hole. We also use thermodynamic geometry to study phase transition in extended phase space. We investigate the behavior of scalar curvature of Weinhold, Ruppeiner, and Quevedo metric in extended phase space of charged Ho?ava–Lifshitz black holes. It is checked if these curvatures could reproduce the result of specific heat for the phase transition.     

Continuous‐Flow Synthesis of CdSe Quantum Dots: A Size‐Tunable and Scalable Approach

In recent years, continuous‐flow/microreactor processing for the preparation of colloidal nanocrystals has received considerable attention. The intrinsic advantages of microfluidic reactors have opened new opportunities for the size‐controlled synthesis of nanocrystals either in the laboratory or on a large scale. Herein, an experimentally simple protocol for the size‐tunable continuous‐flow synthesis of rather monodisperse CdSe quantum dots (QDs) is presented. CdSe QDs are manufactured by using cadmium oleate as cadmium source, selenium dioxide as selenium precursor, and 1‐octadecene as solvent. Exploiting selenium dioxide as selenium source and 1‐octadecene as solvent allows execution of the complete process in open air without any requirement for air‐free manipulations using a glove box or Schlenk line. Continuous‐flow processing is performed with a stainless steel coil of 1.0 mm inner diameter pumping the combined precursor solution through the reactor by applying a standard HPLC pump. The effect of different reaction parameters, such as temperature, residence time, and flow rate, on the properties of the resulting CdSe QDs was investigated. A temperature increase from 240 to 260 °C or an extension of the residence time from 2 to 20 min affords larger nanocrystals (range 3–6 nm) whereas the size distribution does not change significantly. Longer reaction times and higher temperatures result in QDs with lower quantum yields (range 11–28 %). The quality of the synthesized CdSe QDs was confirmed by UV/Vis and photoluminescence spectroscopy, small‐angle X‐ray scattering, and high‐resolution transmission electron microscopy. Finally, the potential of this protocol for large‐scale manufacturing was evaluated and by operating the continuous‐flow process for 87 min it was possible to produce 167 mg of CdSe QDs (with a mean diameter of 4 nm) with a quantum yield of 28 %.