Low-dimension self-interstitial diffusion in α-Zr

The mobility of self-interstitials in α-zirconium (α-Zr) is studied with molecular dynamic (MD) and molecular static (MS) simulations, using Ackland’s many-body inter-atomic potential. The basal crowdion configuration is found to be the ground state. Four types of diffusion jumps can be identified via MS, in-plane in-line, in-plane off-line, out-of-plane in-line and out-of-plane off-line. The in-plane migration is dominated by one-dimensional crowdion motion along the [110] directions, interrupted from time to time by off-line or out-of-plane jumps. Based on the MS results, the activation energies and pre-exponentials for the diffusion processes are determined by fits to the Arrhenius plots of D_c and D_a. The diffusional anisotropy factor D_c/D_a is also obtained, and compares well with experimental results. The mean frequency of each type of jumps is then found using Monte Carlo simulation, and is reported as a function of temperature. The mean lifetime and mean free path of the one-dimensional mobility are then obtained. The 1-D mean free path is found to be unimportant for sink separations involved under the usual irradiation damage conditions. Received: 4 March 2002 / Accepted: 4 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. E-mail: Chung.Woo@polyu.edu.hk     

Improved dimensional stability of Nafion membrane modified using a layer by layer self-assembly of biophilic polymers

The modification of perfluorinated proton exchange membranes (e.g. Nafion) utilizing a layer by layer (LbL) electrostatic assembly of oppositely charged biophilic polymers such as poly-l-lysine as positive layer and dsDNA as a negative layer is developed to protect the interface between the catalyst layer and the membrane in a low temperature fuel cell. Various physicochemical measurements including water uptake, proton conductivity and surface tension were investigated for both the as-received Nafion and the biopolymeric LbL modified Nafion. The smaller water contact angle and the less swelling characteristics of the biopolymer modified Nafion membrane was founded compared to that of as-received Nafion. This clearly indicates that the more hydrophilic surface of biopolymeric layers on Nafion plays an important role in the enhanced dimensional stability. In addition, a potential hypothesis explaining the higher proton conductivity from the LbL biopolymeric film coated Nafion is suggested.     

An answer to a question of A. Lubin: The lifting problem for commuting subnormals

In this paper, we give an answer to a long-standing open question on the lifting problem for commuting subnormals (due to A. Lubin): The subnormality for the sum of commuting subnormal operators does not guarantee the existence of commuting normal extensions.     

Glass transition and miscibility in blends of two semicrystalline polymers: Poly(aryl ether ketone) and poly(ether ether ketone)

Binary melt‐blended mixtures of two aryl ether ketone polymers (i.e., a new poly(aryl ether ketone) (code name PK99) and poly(ether ether ketone) (PEEK), have been studied. Polymer miscibility in glassy amorphous (or melt) domains has been demonstrated for the binary blend comprising of two aryl‐ether‐ketone‐type semicrystalline polymers. Composition‐dependent, single T_g was observed within full composition range in the PK99/PEEK blends, and the narrow T_g breadth also suggests that the scale of mixing was fine and uniform. To better resolve any possible overlapping T_g's, physical aging was imposed on a comparison set of blend samples for the purpose of improving detectability of overlapped multiple transitions if existing. The result still showed one single T_g. The relative sharp T_g and lack of cloud point transition suggest that the scale of molecular intermixing is good. Phase homogeneity was further confirmed using optical and scanning electron microscopy. The X‐ray diffractograms suggest that isomorphism does not exist in the PK99/PEEK blends and that the crystal forms of the respective polymers remain distinct and unchanged by the miscibility in the amorphous region. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1485–1494, 1999     

Cost‐Effective,High‐Performance Porous‐Organic‐Polymer Conductors Functionalized with Sulfonic Acid Groups by Direct Postsynthetic Substitution

We demonstrate the facile microwave‐assisted synthesis of a porous organic framework 1 and the sulfonated solid ( 1S ) through postsubstitution. Remarkably, the conductivity of 1S showed an approximately 300‐fold enhancement at 30 °C as compared to that of 1 , and reached 7.72×10^?2 S cm^?1 at 80 °C and 90 % relative humidity. The superprotonic conductivity exceeds that observed for any conductive porous organic polymer reported to date. This material, which is cost‐effective and scalable for mass production, also revealed long‐term performance over more than 3 months without conductivity decay.     

Ultrathin Free‐Standing Ternary‐Alloy Nanosheets

A synthesis strategy for the preparation of ultrathin free‐standing ternary‐alloy nanosheets is reported. Ultrathin Pd‐Pt‐Ag nanosheets with a thickness of approximately 3 nm were successfully prepared by co‐reduction of the metal precursors in an appropriate molar ratio in the presence of CO. Both the presence of CO and the interplay between the constituent metals provide fine control over the anisotropic two‐dimensional growth of the ternary‐alloy nanostructure. The prepared Pd‐Pt‐Ag nanosheets were superior catalysts of ethanol electrooxidation owing to their specific structural and compositional characteristics. This approach will pave the way for the design of multicomponent 2D nanomaterials with unprecedented functions.     

Anisotropic assembly of Ag nanoprisms

The Ag nanoprisms with controlled arrangements show distinct optical, crystallographic, and surface-enhanced Raman scattering properties depending on their orientation in the assemblies, demonstrating that the controlled assembly of anisotropic nanostructures can be utilized as a powerful tool for studying their physicochemical properties and for the creation of new classes of functional materials.     

Activation of PPAR�� induces profound multilocularization of adipocytes in adult mouse white adipose tissues

We sought to determine the effects of activation of peroxisome proliferator-activated receptor-γ (PPAR-γ) on multilocularization of adipocytes in adult white adipose tissue (WAT). Male C57BL/6 normal, db/db, and ob/ob mice were treated with agonists of PPAR-γ, PPAR-α, or β₃-adrenoceptor for 3 weeks. To distinguish multilocular adipocytes from unilocular adipocytes, whole-mounted adipose tissues were co-immunostained for perilipin and collagen IV. PPAR-γ activation with rosiglitazone or pioglitazone induced a profound change of unilocular adipocytes into smaller, multilocular adipocytes in adult WAT in a time-dependent, dose-dependent, and reversible manner. PPAR-α activation with fenofibrate did not affect the number of locules or remodeling. db/db and ob/ob obese mice exhibited less multilocularization in response to PPAR-γ activation compared to normal mice. Nevertheless, all adipocytes activated by PPAR-γ contained a single nucleus regardless of locule number. Multilocular adipocytes induced by PPAR-γ activation contained substantially increased mitochondrial content and enhanced expression of uncoupling protein-1, PPAR-γ coactivator-1-α , and perilipin. Taken together, PPAR-γ activation induces profound multilocularization and enhanced mitochondrial biogenesis in the adipocytes of adult WAT. These changes may affect the overall function of WAT.     

Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoroethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (¹H NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the –OH groups of PHEA and the –COOH groups of IDA. Upon doping with phosphoric acid (H₃PO₄) to form imidazole–H₃PO₄ complexes, the proton conductivity of the membranes continuously increased with increasing H₃PO₄ content. A maximum proton conductivity of 0.015 S/cm was achieved at 120 °C under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/H₃PO₄ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to 250 °C, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.     

Adsorption of 1,3‐Benzenedithiol and 1,3‐Benzenedimethanethiol on Gold Surfaces

The adsorption characteristics of 1,3‐benzenedithiol (1,3‐BDT) and 1,3‐benzenedimethanethiol (1,3‐BDMT) on Au surfaces are investigated by means of surface‐enhanced Raman scattering, UV/Vis absorption spectroscopy, and cyclic voltammetry (CV). 1,3‐BDMT is found to adsorb via two S–Au linkages at concentrations below monolayer coverage, but to have an upright geometry as the concentration increases on Au nanoparticles. On the other hand, 1,3‐BDT is found to adsorb by forming two S–Au linkages, regardless of concentration, based on the disappearance of the ν(SH)_free stretching band. Because of the absence of the methylene unit, 1,3‐BDT appeares not to self‐assemble efficiently on Au surfaces. The UV/Vis absorption spectroscopy and CV techniques are also applied to check the formation of self‐assembled monolayers of 1,3‐BDT and 1,3‐BDMT on Au. Density functional theory calculations based on a simple adsorption model using an Au₈ cluster are performed to better understand the nature of the adsorption characteristics of 1,3‐BDT and 1,3‐BDMT on Au surfaces.