Electrical and magnetic properties of CoFeAlO thin films

Influences of oxygen-partial pressure and annealing on the electrical and magnetic properties of CoFeAlO thin films were systematically investigated by means of resistivity, permeability, magnetization and ferromagnetic resonance (FMR) measurements. It was found that, with increasing oxygen-partial pressure or under annealing, the electrical resistivity of the film increased and the magnetic softness decreased, which is attributed to the microstructural change of the film. Interestingly, an as-deposited Co_45.30Fe_20.65Al_19.34O_14.71 film was found to exhibit an inverted hysteresis loop with negative coercivity, and this peculiar phenomenon disappeared upon effects of oxygen-partial pressure and annealing. It was also found that the as-deposited films owned a narrow FMR line width that increased with increasing oxygen-partial pressure or under annealing.     

Non-Euler–Lagrangian Pareto-optimality Conditions for Dynamic Multiple Criterion Decision Problems

In this paper the problem of verifying the Pareto-optimality of a given solution to a dynamic multiple-criterion decision (DMCD) problem is investigated. For this purpose, some new conditions are derived for Pareto-optimality of DMCD problems. In the literature, Pareto-optimality is characterized by means of Euler-Lagrangian differential equations. There exist problems in production and inventory control to which these conditions cannot be applied directly (Song 1997). Thus, it is necessary to explore new conditions for Pareto-optimality of DMCD problems. With some mild assumptions on the objective functionals, we develop necessary and/or sufficient conditions for Pareto-optimality in the sprit of optimization theory. Both linear and non-linear cases are considered.     

Reintroduced solids increase inhibitor levels in a pretreated corn stover hydrolysate

Following detoxification of the liquid hydrolysate produced in a corn stover pretreatment process, inhibitor levels are seen to increase with the re-addition of solids for the ensuing hydrolysis and fermentation processes. The solids that were separated from the slurry before detoxification of the liquor contain approx 60% (w/w) moisture, and contamination occurs owing to the diffusion of inhibitors from the moisture entrained in the porous structure of the corn stover solids into the bulk fluid. This evidence suggests the need for additional separation and detoxification steps to purge residual inhibitors entrained in the moisture in the solids. An overliming process to remove furans from the hydrolysate failed to reduce total organic acids concentration, so acids were removed by treatment with an activated carbon powder. Smaller carbon doses proved more efficient in removing organic acids in terms of grams of acid removed per gram of carbon powder. Sugar adsorption by the activated carbon powder was minimal.     

Enhanced ferromagnetic properties of diluted Fe doped ZnO with hydrogen treatment

The single-phase diluted magnetic Fe-ion (5%) doped ZnO powders were prepared by solid-state reaction method. The powders were annealed in Ar or Ar/H₂(5%) atmosphere at 1200 °C. The crystal structure, electric and magnetic properties for the Zn_0.95Fe_0.05O powders have been studied with X-ray diffraction (XRD) vibrating sample magnetometer, resistance and Hall measurement. All the peaks for the XRD pattern of samples belong to the hexagonal (P6₃mc) lattice of ZnO, and no indication of a secondary phase. The lattice parameters for the Zn_0.95Fe_0.05O with an annealing in Ar/H₂(5%) atmosphere were a₀=3.256 Å and c₀=5.206 Å at room temperature. The hysteresis curve for the Zn_0.95Fe_0.05O at room temperature was enhanced ferromagnetic behaviour with an annealing in Ar/H₂(5%) atmosphere. We give an explanation for enhanced ferromagnetic behaviour with H₂ treatment by electric properties.     

Laser-sintered mesoporous TiO2 electrodes for dye-sensitized solar cells

Low-temperature laser sintering has been successfully demonstrated to improve the overall conversion efficiency of dye-sensitized solar cells. Mesoporous TiO₂ electrodes were prepared from a colloidal solution of TiO₂ nanopowders by a laser direct-write technique and then sintered by a quasi-continuous-wave UV laser (λ=355 nm) for the fabrication of dye-sensitized solar cells. The overall conversion efficiency of the cells based on the laser-sintered TiO₂ electrodes was double that of the devices with non-laser-treated TiO₂ electrodes. This enhancement is attributed to both the removal of organic additives and the improved inter-nanoparticle electrical contacts induced by the laser-sintering process, which led to an increase in porosity and dye-absorption sites in the TiO₂ electrodes. PACS 61.80.Ba; 61.46.+w; 73.22.-f; 84.60.Jt     

High-frequency characteristics of CoFeVAlONb thin films

High-frequency characteristics of CoFeVAlONb thin films were studied. A thin film of Co_43.47Fe_35.30V_1.54Al_5.55O_9.93Nb_4.21 is observed to exhibit excellent magnetic properties; magnetic coercivity of 1.24 Oe, uniaxial in-plane anisotropy field of 66.99 Oe, and saturation magnetization of 19.8 kG. The effective permeability of the film is as high as 1089 and is stable up to 1.8 GHz, and with ferromagnetic resonance over 3 GHz. This film also has very high electrical resistivity of about 628 μΩ cm. These superior properties make it ideal for high-frequency magnetic applications.     

FMS scheduling based on timed Petri Net model and reactive graph search

This paper presents a new scheduling method for manufacturing system based on the Timed Petri Net model and a reactive fast graph search algorithm. The following two typical problems are addressed in this paper. (1) Minimization of the maximum completion time. (2) Minimization of the total tardiness. As for the problem (1), a new search algorithm which combines the RTA^∗ and a rule-based supervisor is proposed. As for problem (2), the original Petri Net model is converted to its reverse model and the algorithm developed for the problem (1) is applied, regarding the due date as the starting time in the reverse model. Some numerical experiments are carried out to demonstrate usefulness of our algorithm.     

Locating and counting bifurcation points of satellite components from the main component in the degree-n bifurcation set

The bifurcation point where a satellite component buds from another component is characterized by the existence of the common tangent line between the two osculating components appearing in the degree-n bifurcation set. We investigate the existence, location and number of bifurcation points for satellite components budding from the main component in the degree-n bifurcation set as well as a parametric boundary equation of the main component of the degree-n bifurcation set. Cusp points are also located on the boundary of the main component. Typical degree-n bifurcation sets and their components are illustrated with some computational results.     

Property changes of electroplated Cu/Co alloys and multilayers by organic additives

We investigated the change of magnetic properties of the electroplated Cu/Co alloys and multilayers caused by organic additives and high temperature annealing. When plated with a pure Cu/Co electrolyte, the alloy contained ∼25% of Cu and ∼75% of Co. The alloy was made of hcp-Co, fcc-Co and Cu(1 1 1) and was super-paramagnetic at room temperature. As we add a few organic additives in the plating electrolyte, the hcp-Co of the films disappeared. The organic additives contained in the electrolytes changed paramagnetic Cu/Co multilayers to ferromagnets. High-temperature thermal annealing increased coercivity due to the growth of the Co grains.