Fringe contrast-based 3D profilometry using fringe projection

Quality-guided algorithm is a widely used method in phase unwrapping. This paper shows an accurate quality map based on fringe contrast for 3D shape measurement. Phase-shifted fringe patterns are projected onto an object surface by a programmable liquid crystal projector and recorded by a CCD camera. A wrapped phase map and a fringe contrast map are extracted from the deformed fringe patterns by the phase-shifting technique. Guided by the contrast map, the quality-guided unwrapping algorithm minimizes unwanted shadow and non-uniform surface reflectance effects and is able to retrieve a correct surface profile. Validity of the proposed method is tested on a fish model and a cutting tool specimen.     

Real time estimation of CO2 laser weld quality for automotive industry

Laser welding is one of the most precise welding processes in joining sheet metals. In laser welding, performing real time evaluation of the welding quality is very important to enhance the efficiency of the welding process. In this study, the plasma and spatter, which are generated during laser welding, are measured using UV and IR photodiodes. The factors that influence weld quality are classified into five categories; optimal heat input, slightly low heat input, low heat input, partial joining due to gap mismatch, and nozzle deviation. The data number deviated from reference signals and their standard deviations were also considered to evaluate the qualities. A system was also formulated to perform real time evaluations of the weld quality using a fuzzy multi-feature pattern recognition with the measured signals.     

Using Gd-EOB-DTPA-enhanced 3-T MRI for the differentiation of infiltrative hepatocellular carcinoma and focal confluent fibrosis in liver cirrhosis

Purpose

The purpose of the study was to determine significant imaging features to differentiate between infiltrative hepatocellular carcinoma (HCC) and confluent fibrosis (CF) in liver cirrhosis using Gd-EOB-DTPA-enhanced 3-T magnetic resonance imaging.

Material and methods

Nineteen infiltrative HCCs and eight CFs were included. We evaluated the difference in imaging findings and apparent diffusion coefficient (ADC) between the two entities. We compared T2-weighted image (WI) and hepatobiliary phase (HBP) in terms of the clarity of the lesion outer margin.

Results

Seventeen infiltrative HCCs showed lobulated margin, while focal CFs showed either straight (n = 3) or irregular margins (n = 5) (P = .001). All infiltrative HCCs had intact or bulging contours, and all focal CFs showed capsular retraction (P = .001). Fourteen infiltrative HCCs and two focal CFs showed arterial enhancement (P = .035). The ADC of infiltrative HCCs was significantly lower than that of CFs (P = .001). Satellite nodules were noted in 10 infiltrative HCCs. In terms of outer margin clarity, infiltrative HCCs showed a more distinct margin on HBP than on T2-WI (P = .005), while these two sequences were not significantly different in focal CFs (P = 1.000).

Conclusion

HBP improved the imaging characteristics of infiltrative HCC, allowing it to be distinguished from focal CF. Infiltrative HCC showed lower ADC values than focal CF. Lobular configuration, contour bulging, enhancement pattern, associated satellite nodules and portal vein thrombosis were still found to be highly suggestive MR findings for infiltrative HCC.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preferential etching of ion bombarded GaAs

Abrupt changes in the near-band-edge luminescence of n-type undoped GaAs after implantation with 400 keV Zn ions and vacuum annealing at 580°C are reported. The good agreement of the spectral position, half-width and temperature dependence of the emission obtained after implantation and annealing with that of melt-doped GaAs: Zn indicates that implanted Zn ions have been incorporated at Ga lattice sites. The larger number of Zn substitutions obtained when bombardment is made on the Ga face than for an equivalent fluence on the As face demonstrates the existence of a polar implant effect.     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

Graphene nanosheets: Ultrasound assisted synthesis and characterization

A facile sonochemical route for the synthesis of graphene nanosheets via reduction of graphene oxide (GO) has been reported. The synthesized graphene sheets are characterized using UV–vis spectra, Fourier transform infra-red (FT-IR) spectra, transmission electron microscope, X-ray photoelectron spectra (XPS) and Raman spectroscopic techniques. The UV–vis spectroscopy results showed that the absorption peak was red shifted due to the reduction of GO into graphene. FT-IR and XPS spectra revealed the removal of oxygenated functional groups in graphene after the reduction process. Raman spectra confirmed the restoration of new sp² carbon domains in graphene sheets after the reduction. The sonochemical approach for the synthesis of graphene nanosheets is relatively fast, cost-effective and efficient as compared to other methods.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Γ andX bandgap hydrostatic deformation potentials for epitaxial In0.52Al0.48As on InP(001)

The pressure dependence of the direct and indirect bandgap of epitaxial In_0.52Al_0.48As on InP(001) substrate has been measured using photoluminescence up to 92 kbar hydrostatic pressure. The bandgap changes from Γ toX at an applied pressure of ∼ 43 kbar. Hydrostatic deformation potentials for both the Γ andX bandgaps are deduced, after correcting for the elastic constant (bulk modulus) mismatch between the epilayer and the substrate. For the epilayer we obtain and+(2.81±0.15)eV for the Γ andX bandgaps respectively. From the pressure dependence of the normalized Γ-bandgap photoluminescence intensity a Γ-X lifetime ratio, (τ_Γ/τ _X ), of 4.1×10⁻³ is deduced.