Magnetic and noise properties of as-deposited and annealed soft underlayer

We studied the magnetic and noise properties with various soft underlayer (SUL) types. For an as-deposited SUL, the results of spectrum, oscilloscope waveform and MFM indicated that the SUL types with IrMn pinning layer have more noise level than that of SUL types without IrMn pinning layer. And, after magnetic filed annealing along radial direction of disk, the exchange bias field increased and the noise level of type B (exchange bias type) decreased. These results reveal that incomplete or partial coupling may be generated at the interface between IrMn and ferromagnetic layer in as-deposited SUL. This incomplete coupling may result in complex or multidomain patterns in ferromagnetic layer.     

Growth of InN films and nanorods by H-MOVPE

InN films and nanorods were grown by hydride metalorganic vapor phase epitaxy (H-MOVPE) and the effects of growth temperature, and NH₃/TMIn and HCl/TMIn ratios on morphological dependences were studied. The growth habit of InN varied from thin film to microrod to nanorod to no deposition as the growth conditions were changed about transition from growth to etching conditions. The growth and etch regimes were also predicted by chemical equilibrium calculations of In–C–H–Cl–N-inert system. The optical properties of InN nanorods and columnar structured films were measured by room temperature PL and a maximum intensity was observed at 1.08 eV for both structures.     

Increased and balanced light emission of transparent organic light-emitting diodes by enhanced microcavity effects

We report on improved and controlled light outcoupling of transparent organic light-emitting diodes (TOLEDs) by inserting thin silver layers between the indium tin oxide anode and the hole transporting layer. The introduction of Ag layers influences both the bottom and top emission of the TOLEDs, and it results in dramatic changes in the electroluminescence spectra and angular distribution. We find that the overall external quantum efficiency can be increased up to 18.8%, and the ratio of bottom and top emission can be almost identical.     

Paradoxical high signal intensity of hepatocellular carcinoma in the hepatobiliary phase of Gd-EOB-DTPA enhanced MRI: initial experience

Purpose

To describe the paradoxical high signal intensity of hepatocellular carcinoma (HCC) in the hepatobiliary phase on gadolinium-ethoxybenzyl-diethylenetriamine pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI).

Materials and Methods

A database search was performed to identify cases of HCC that showed unusual prolonged enhancement in the hepatobiliary phase of Gd-EOB-DTPA MRI. All patients received 3.0-T liver MRI including precontrast T1-weighted images, T2-weighted images and a post Gd-EOB-DTPA-enhanced dynamic study. The signal intensity of HCC was measured at pre-enhanced, arterial, portal, delayed and hepatobiliary phase using regions of interest. Radiologic and pathologic correlation was performed for the paradoxically prolonged enhancing portion of HCC in the hepatobiliary phase.

Results

Four patients (all male, age range 44-70; mean 57.5 years) were included in this study. All patients showed HCC lesions that were low signal intensity (SI) on T1-WI, high SI on T2-WI, enhanced in arterial phase, and washed-out in delayed phase. All cases showed paradoxically high SI in hepatobiliary phase, which was unusual for HCC. Pathologically, they were all diagnosed as well-differentiated HCC with prominent cytoplasm and a bile secreting appearance.

Conclusion

HCC may demonstrate the prolonged high signal intensity at the hepatobiliary phase on Gd-EOB-DTPA enhanced MRI. These HCCs tended to be highly differentiated and to have prominent bile secretion.     

An adjustable approach to fuzzy soft set based decision making

Molodtsov’s soft set theory was originally proposed as a general mathematical tool for dealing with uncertainty. Recently, decision making based on (fuzzy) soft sets has found paramount importance. This paper aims to give deeper insights into decision making based on fuzzy soft sets. We discuss the validity of the Roy-Maji method and show its true limitations. We point out that the choice value designed for the crisp case is no longer fit to solve decision making problems involving fuzzy soft sets. By means of level soft sets, we present an adjustable approach to fuzzy soft set based decision making and give some illustrative examples. Moreover, the weighted fuzzy soft set is introduced and its application to decision making is also investigated.     

Crystalline-phase-dependent red emission behaviors of Gd2O3:Eu3+ thin-film phosphors

Gd₂O₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed-laser deposition. The films grown at different deposition conditions showed different crystalline phases, surface morphologies and luminescent characteristics. Both cubic and monoclinic crystalline phases were observed for the Gd₂O₃:Eu³⁺ films, and the crystalline structure and the surface morphology of the films were highly dependent on the oxygen pressure and substrate temperature. The cubic system showed a higher luminescence than the monoclinic system. The luminescence characteristics were strongly influenced by not only the crystalline structure but also the surface morphology of the films. The photoluminescencebrightness data obtained from Gd₂O₃:Eu³⁺ films indicate that Al₂O₃(0001) is a promising substrate for growth of high-quality Gd₂O₃:Eu³⁺ thin-film red phosphor. In particular, the Gd₂O₃:Eu³⁺ films showed a much better photoluminescence behavior than a Y₂O₃:Eu³⁺ films with the same thickness. PACS 78.20.-e; 78.55.-m; 78.66.-w     

Transflective liquid-crystal display using low-twisted vertically aligned mode

We present the design of a transflective and low-power LCD using a low-twist vertically aligned liquid crystal (LC) cell, achieved by blending a chiral additive with a patterned reflector in a single-domain configuration. Unlike the conventional single-domain transflective LCD, in which it is possible to optimize only one of the transmissive and reflective regions, the device suggests that it is possible to optimize both the transmission and reflection design to obtain favorable results in both reflective and transmissive light conditions by optimizing the chiral pitch and twist angle. From the parameter space diagram (PSD) method, which does not include the information on chiral pitch and the nonuniform LC director tilt angle, optimization focused on the transmissive region is performed. By analyzing the relation between the transmittance and the chiral pitch under the applied voltage, the optimized twist angle and chiral pitch are proposed. It is described that the optimized twist angle is also available for the reflective region by the dynamic PSD method by considering the average tilt angle under applied voltage.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

Observation of a new DsJ meson in B+-->D0D0K+ decays

We report the observation of a new DsJ meson produced in B+-->D0DsJ-->D0D0K+. This state has a mass of M=2708+/-9(-10)(+11) MeV/c2, a width Gamma=108+/-23(-31)(+36) MeV/c2 and a 1- spin-parity. The statistical significance of this observation is 8.4 sigma. The results are based on an analysis of 449 x 10(6) BB events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider.     

Investigating magnetorheological properties of a mixture of two types of carbonyl iron powders suspended in an ionic liquid

In this work, properties of a magnetorheological (MR) fluid, prepared by dispersing a mixture of two types of carbonyl iron powders (CIPs) of different sizes, in an ionic liquid (N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate) that is stable from 9 °C to ca. 300 °C, have been investigated. At first, the random packing density of the mixture was computed as function of mixing ratio of CIP, in order to find out the tendency of the variation. Next, several mixtures, all having the same weight, were prepared at various mixing ratios and dispersed in the ionic liquid, in order to experimentally find the most suitable mixing ratio of CIP. Then, the magnetic clusters of the synthesized MR fluids were observed by using a digital microscope equipped with two permanent magnets, whereas the MR properties were investigated by using a rotation viscometer equipped with a solenoid coil. The experimental results pointed out that the MR fluid with 60 wt% fraction of large particles exhibited the highest MR response.