Modelling temperature and concentration dependent solid/liquid interfacial energies

Models for the prediction of the solid/liquid interfacial energy in pure substances and binary alloys, respectively, are reviewed and extended regarding the temperature and concentration dependence of the required thermodynamic entities. A CALPHAD-type thermodynamic database is used to introduce temperature and concentration dependent melting enthalpies and entropies for multicomponent alloys in the temperature range between liquidus and solidus. Several suitable models are extended and employed to calculate the temperature and concentration dependent interfacial energy for Al–FCC with their respective liquids and compared with experimental data.     

Heterojunction light emitting diodes fabricated with different n-layer oxide structures on p-GaN layers by magnetron sputtering

We grew heterojunction light emitting diode (LED) structures with various n-type semiconducting layers by magnetron sputtering on p-type GaN at high temperature. Because the undoped ZnO used as an active layer was grown under oxygen rich atmosphere, all LED devices showed the EL characteristics corresponding to orange-red wavelength due to high density of oxygen interstitial, which was coincident with the deep level photoluminescence emission of undoped ZnO. The use of the Ga doped layers as a top layer provided the sufficient electron carriers to active region and resulted in the intense EL emission. The LED sample with small quantity of Mg incorporated in MgZnO as an n-type top layer showed more intense emission than the LED with ZnO, in spite of the deteriorated electrical and structural properties of the MgZnO film. This might be due to the improvement of output extraction efficiency induced by rough surface.     

Characterization of mitochondria isolated from normal and ischemic hearts in rats utilizing atomic force microscopy

Mitochondria play critical roles in both the life and the death of cardiac myocytes. Various factors, such as the loss of ATP synthesis and increase of ATP hydrolysis, impairment in ionic homeostasis, formation of reactive oxygen species (ROS), and release of proapoptotic proteins are related to the generation of irreversible damage. It has been proposed that the release of cytochrome c is caused by a swelling of the mitochondrial matrix triggered by the apoptotic stimuli. However, there is a controversy about whether or not the mitochondria, indeed, swell during apoptosis. The major advantages of atomic force microscopy (AFM) over conventional optical and electron microscopes for bio-imaging include the fact that no special coating and vacuum are required and imaging can be done in all environments--air, vacuum or aqueous conditions. In addition, AFM force-distance curve measurements have become a fundamental tool in the fields of surface chemistry, biochemistry, and material science. In this study, we used AFM to observe the morphological and property changes in heart mitochondria that were isolated from a rat myocardial infarction model. From the shape parameters of the mitochondria in the AFM topographic image, it seemed that myocardial infarction caused the mitochondrial swelling. Also, the results of force-distance measurements showed that the adhesion force of heart mitochondria was significantly decreased by myocardial in infarction. Therefore, we suggested that myocardial infarction might be the cause of mitochondrial swelling and the changes in outer membrane of heart mitochondria.     

Synthesis and optical properties of 10 mol% Ce, 5 mol% Tb co-doped KGdF4 and GdF3 submicro/nanocrystals

By controlling the pH values of prepared solutions, the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped KGdF₄ (synthesized with pH = 3) and the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped GdF₃ (synthesized with pH = 1) submicro/nanocrystals have been synthesized based on a citric acid assisted hydrothermal method. For comparison, the samples synthesized by co-precipitation method (without hydrothermal treatment) with pH = 3 and 1 were also collected. The X-ray diffraction data illustrate that the hydrothermal treated KGdF₄ sample crystallizes in the cubic phase and the GdF₃ sample crystallizes in the orthorhombic phase. However, the samples synthesized by co-precipitation method with pH = 3 and 1 are both cubic phase KGdF₄. The field emission scanning electron microscopy images suggest that the hydrothermal treated KGdF₄ submicro/nanocrystals present spherical morphology and the GdF₃ submicrocrystals are rhombic-shaped. And the photoluminescence excitation and emission spectra as well as the luminescent dynamic curves demonstrate the difference in optical properties of the two hydrothermal treated samples.     

Structural studies of AgSbTe2 under pressure: Experimental and theoretical analyses

The crystal structure of AgSbTe₂ has been refined using first-principles calculations, from which the ordering of the cations, Ag and Sb, was confirmed. The spontaneous formation of two (D4 and L1₁) phases at ambient and elevated pressure was demonstrated theoretically. The compound was also prepared and its high-pressure structural deformation sequence, ranging from ambient to 50.9 GPa, was observed with synchrotron radiation at room temperature. The compound underwent a pressure-induced amorphization (PIA) at 24.6 GPa and then started recrystallizing at 49.2 GPa. The bulk modulus (B₀) and pressure derivative of the bulk modulus (B_p) were determined experimentally to be 56.3 ± 5.1 GPa and 4.3 ± 0.8, respectively. We suggest that large displacements of Te atoms to Ag vacancy positions are responsible for PIA and the recrystallization.     

η and η' mesons from lattice QCD

The large mass of the ninth pseudoscalar meson, the η', is believed to arise from the combined effects of the axial anomaly and the gauge field topology present in QCD. We report a realistic, 2+1-flavor, lattice QCD calculation of the η and η' masses and mixing which confirms this picture. The physical eigenstates show small octet-singlet mixing with a mixing angle of θ=-14.1(2.8)°. Extrapolation to the physical light quark mass gives, with statistical errors only, mη=573(6) MeV and mη'=947(142) MeV, consistent with the experimental values of 548 and 958 MeV.     

Half-metallicity at the non-polar surfaces of rock-salt and zinc-blende MgN

We discuss the electronic properties of non-polar surfaces of MgN rock-salt and zinc-blende crystals. We studied the (001) surface of the rock-salt and the (110) surface of the zinc-blende MgN with the use of an ab initio full-electron linearized augmented plane wave method within density functional theory. The structural parameters of the two surfaces were optimized by relaxing the position of the atoms in the unit cells in the force directions. The results of the calculations indicate that both rock-salt MgN (001) and ZB MgN (110) demonstrate half-metallic properties. The zinc-blende MgN (110) surface is electronically more stable as a half-metal than the rock-salt MgN (001) surface. The magnetic properties of the two systems are tailored mainly by the spin-polarization of electrons of N atoms.     

Ultra-smooth platinum surfaces for nanoscale devices fabricated using chemical mechanical polishing

A technique involving two steps of chemical mechanical polishing (CMP) has been developed to produce ultra-smooth metal surfaces with an RMS roughness better than 0.1 nm. A figure of merit termed degree of smoothness (DOS) is proposed for the purpose of quantifying the extent of smoothness of a polished metal surface. A post CMP metal slurry cleaning solution was used for cleaning Pt slurry for the first time and by applying special techniques, a very high quality clean surface was attained. Applications of the polished Pt electrodes in interfacing molecular switching devices with self-assembled monolayers of molecules have been found to dramatically improve the packing and orientation of the molecular monolayer with a huge improvement in the molecular electronics device yields. These smooth metal surfaces may open doors for new opportunities in future nanoscale devices. PACS 81.05.Bx; 81.16.Rf; 81.65.Ps     

Absolute triple differential cross sections for electron impact ionization of helium: Comparison between experimental and theoretical results at 256 eV collision energy

Triple differential cross sections have been measured for electron impact ionization of helium at 256 eV collision energy, 3 eV energy of the slow outgoing electrons and scattering angles of the fast outgoing electrons of 4°, 6°, 8°, and 10°. The data have been put on absolute scale by extrapolating the generalized oscillator strength to zero momentum transfer. In this optical limit the triple differential cross sections can be normalized by using the well-known cross sections for photoionization. The experimental data are compared with results of different theoretical approaches. For nearly all calculated curves rather good agreement with the measurements is obtained for the relative shape of the binary peak, while often its absolute cross section is overestimated. Concerning the recoil peak, larger discrepancies are found with respect to both, relative shapes and cross sections. A perceptible improvement can be stated for calculations which have been performed in a distorted wave approximation and in second Born approximation.