Heterojunction light emitting diodes fabricated with different n-layer oxide structures on p-GaN layers by magnetron sputtering

We grew heterojunction light emitting diode (LED) structures with various n-type semiconducting layers by magnetron sputtering on p-type GaN at high temperature. Because the undoped ZnO used as an active layer was grown under oxygen rich atmosphere, all LED devices showed the EL characteristics corresponding to orange-red wavelength due to high density of oxygen interstitial, which was coincident with the deep level photoluminescence emission of undoped ZnO. The use of the Ga doped layers as a top layer provided the sufficient electron carriers to active region and resulted in the intense EL emission. The LED sample with small quantity of Mg incorporated in MgZnO as an n-type top layer showed more intense emission than the LED with ZnO, in spite of the deteriorated electrical and structural properties of the MgZnO film. This might be due to the improvement of output extraction efficiency induced by rough surface.     

Characterization of mitochondria isolated from normal and ischemic hearts in rats utilizing atomic force microscopy

Mitochondria play critical roles in both the life and the death of cardiac myocytes. Various factors, such as the loss of ATP synthesis and increase of ATP hydrolysis, impairment in ionic homeostasis, formation of reactive oxygen species (ROS), and release of proapoptotic proteins are related to the generation of irreversible damage. It has been proposed that the release of cytochrome c is caused by a swelling of the mitochondrial matrix triggered by the apoptotic stimuli. However, there is a controversy about whether or not the mitochondria, indeed, swell during apoptosis. The major advantages of atomic force microscopy (AFM) over conventional optical and electron microscopes for bio-imaging include the fact that no special coating and vacuum are required and imaging can be done in all environments--air, vacuum or aqueous conditions. In addition, AFM force-distance curve measurements have become a fundamental tool in the fields of surface chemistry, biochemistry, and material science. In this study, we used AFM to observe the morphological and property changes in heart mitochondria that were isolated from a rat myocardial infarction model. From the shape parameters of the mitochondria in the AFM topographic image, it seemed that myocardial infarction caused the mitochondrial swelling. Also, the results of force-distance measurements showed that the adhesion force of heart mitochondria was significantly decreased by myocardial in infarction. Therefore, we suggested that myocardial infarction might be the cause of mitochondrial swelling and the changes in outer membrane of heart mitochondria.     

Structural studies of AgSbTe2 under pressure: Experimental and theoretical analyses

The crystal structure of AgSbTe₂ has been refined using first-principles calculations, from which the ordering of the cations, Ag and Sb, was confirmed. The spontaneous formation of two (D4 and L1₁) phases at ambient and elevated pressure was demonstrated theoretically. The compound was also prepared and its high-pressure structural deformation sequence, ranging from ambient to 50.9 GPa, was observed with synchrotron radiation at room temperature. The compound underwent a pressure-induced amorphization (PIA) at 24.6 GPa and then started recrystallizing at 49.2 GPa. The bulk modulus (B₀) and pressure derivative of the bulk modulus (B_p) were determined experimentally to be 56.3 ± 5.1 GPa and 4.3 ± 0.8, respectively. We suggest that large displacements of Te atoms to Ag vacancy positions are responsible for PIA and the recrystallization.     

Half-metallicity at the non-polar surfaces of rock-salt and zinc-blende MgN

We discuss the electronic properties of non-polar surfaces of MgN rock-salt and zinc-blende crystals. We studied the (001) surface of the rock-salt and the (110) surface of the zinc-blende MgN with the use of an ab initio full-electron linearized augmented plane wave method within density functional theory. The structural parameters of the two surfaces were optimized by relaxing the position of the atoms in the unit cells in the force directions. The results of the calculations indicate that both rock-salt MgN (001) and ZB MgN (110) demonstrate half-metallic properties. The zinc-blende MgN (110) surface is electronically more stable as a half-metal than the rock-salt MgN (001) surface. The magnetic properties of the two systems are tailored mainly by the spin-polarization of electrons of N atoms.     

Off-peak saturation effects of beam-plasma instability

For beam-plasma instability in the absence of a magnetic field, hybrid simulations produce almost identical results to those of particle simulations (both agree with linear and nonlinear analyses), but with much reduced computing cost and noise level. With the verification by simulations, it is shown that the saturation level is very strongly influenced by the discrete wave number spectrum, sometimes giving different, by an order of magnitude, results by choosing slightly different off-peak (in growth rate curve) parameters, which must be considered in most simulations (whether hybrid or particle or whether magnetized or unmagnetized)     

Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.     

Effect of surface hydrogenation on the topological properties of multilayer graphene

We have investigated effects of surface hydrogenation on the topological properties of multilayer graphene by using density functional theory calculations and a tight-binding model. Hydrogen adsorption on a dimer site of a surface layer decouples the surface layer from the rest of the layers. Hydrogen adsorption on a nondimer site introduces a band mixing between the hydrogenated graphene and the rest of the graphene layers. The valley Hall effects and spin-valley-resolved Chern numbers of multilayer graphene, calculated as a function of the sublattice potential and the potential perpendicular to the layers, was found to be sensitive to details of inversion symmetry-breaking potentials. While the topological invariant depends on the adsorption site and spin polarization, surface-hydrogenated M-layer graphene was found to be topologically equivalent to (M-1)-layer graphene under inversion symmetry-breaking potentials regardless of the adsorption site.     

Supercapacitive electrochemical performance of graphene-containing carbon aerogel prepared using polyethyleneimine-modified graphene oxide

Graphene-containing carbon aerogel was prepared by a sol–gel polymerization of resorcinol-formaldehyde (RF) method using polyethyleneimine (PEI)-modified chemically exfoliated grapheme oxide, and its electrochemical performance as an electrode for supercapacitor was examined. The effect of PEI in the preparation of RFGO (resorcinol-formaldehyde and graphene oxide) solution on the physicochemical and electrochemical properties of graphene-containing carbon aerogel (CAPG) was investigated. For comparison, graphene-containing carbon aerogel was prepared using PEI-free graphene oxide (CAG). Graphene-free carbon aerogel (CA) was also prepared. CAPG showed the highest BET surface area (792 m²/g) and the largest pore volume (1.64 cm³/g) with well-developed porous structure. Various electrochemical measurements revealed that CAPG showed high specific capacitance (205 F/g), low equivalent series resistance (0.55 Ω), and superior capacitive behavior. The PEI-modified graphene oxide played an important role in enhancing physicochemical properties and supercapacitive electrochemical performance of CAPG.     

Graphene nanosheets: Ultrasound assisted synthesis and characterization

A facile sonochemical route for the synthesis of graphene nanosheets via reduction of graphene oxide (GO) has been reported. The synthesized graphene sheets are characterized using UV–vis spectra, Fourier transform infra-red (FT-IR) spectra, transmission electron microscope, X-ray photoelectron spectra (XPS) and Raman spectroscopic techniques. The UV–vis spectroscopy results showed that the absorption peak was red shifted due to the reduction of GO into graphene. FT-IR and XPS spectra revealed the removal of oxygenated functional groups in graphene after the reduction process. Raman spectra confirmed the restoration of new sp² carbon domains in graphene sheets after the reduction. The sonochemical approach for the synthesis of graphene nanosheets is relatively fast, cost-effective and efficient as compared to other methods.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.