Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Total synthesis and absolute stereochemistry of (9R,10S)-epoxyheptadecan-4,6-diyn-3-one, a diacylglycerol acyltransferase inhibitor from Panax ginseng

Asymmetric synthesis of four possible stereoisomers of (9,10)-epoxyheptadecan-4,6-diyn-3-one was accomplished, and the absolute configuration of the naturally occurring (9R,10S)-epoxyheptadecan-4,6-diyn-3-one (1) was elucidated.     

A novel and efficient route to diarylmethanes catalyzed by nickel(II) ion on nanoporous carbon

Much improved catalytic carbon-carbon bond-forming reactions between aryl chlorides and Grignard reagents has been achieved using nickel(II) ion on nanoporous carbon.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Ratiometric chemosensing of Mg ions by a calix[4]arene diamide derivative

A new chemosensor with a phenanthroimidazole subunit based upon calix[4]arene-diamide has been synthesized, and its Mg²⁺-selective fluoroionophoric properties were investigated in an aqueous DMSO solution. The compound exhibited a pronounced Mg²⁺-selective fluoroionophoric behavior over other physiologically relevant metal ions. A significant red shift in fluorescence emission (Δλ = 86 nm) provided the ratiometric determination as well as naked-eye detection of Mg²⁺ ions.     

Factors affecting the catalytic epoxidation of olefins by iron porphyrin complexes and H2O2 in protic solvents

The catalytic epoxidation of cyclohexene by iron(III) porphyrin complexes and H2O2 has been investigated in alcohol solvents to understand factors affecting the catalyst activity in protic solvents. The yields of cyclohexene oxide and the Fe(III/II) reduction potentials of iron porphyrin complexes were significantly affected by the protic solvents, and there was a close correlation between the product yields and the reduction potentials of the iron porphyrin catalysts. The role of alcohol solvents was proposed to control the electronic nature of iron porphyrin complexes that determines the catalyst activity in the epoxidation of olefins by H2O2. We have also demonstrated that an electron-deficient iron porphyrin complex can catalyze the epoxidation of olefins by H2O2 under conditions of limiting substrate with high conversion efficiency in a solvent mixture of CH3OH and CH2Cl2.     

In situ photopolymerization of a polymerizable poly(ethylene glycol)-covered phospholipid monolayer on a methacryloyl-terminated substrate

We have prepared a chemically anchored monolayer of PEG (poly(ethylene glycol)) and phospholipid mixture (PEG/phospholipid) on a methacryloyl-terminated substrate by in situ photopolymerization. Both monoacryloyl phospholipid (acryloyl-PC, 1-palmitoyl-2-[12-(acryloyloxy)dodecanoyl]-sn-glycero-3-phosphocholine) and monoacryloyl PEG (acryloyl-PEG, 12-(acryloyloxy)dodecanoyl-PEG) were synthesized by modifyingphospholipid and PEGwith 12-(acryloyloxy)-1-dodecanoic acid and 12-(acryloyloxy)-1-dodecanol, respectively. The surface pressure-area (pi-A) isotherm showed that acryloyl-PEG molecules were stable in the phospholipid monolayer and that they could be evenly inserted into a phospholipid monolayer at the air/water interface. By adding 10 mol % acryloyl-PEG into phosholipid vesicles, we could produce a PEG/phosholipid monolayer on methacryloyl-terminated substrates using vesicle fusion for 3 h. Then, this polymerizable PEG/phospholipid monolayer was in situ photopolymerized onto a methacryloyl-terminated substrate with eosin Y/triethanolamine as co-initiators. Optimal vesicle fusion and irradiation condition were determined with respect to the vesicle fusion time and duration of irradiation. As confirmed by atomic force microscopy and X-ray reflectivity studies, the polymerized PEG/phosholipid surface formed a PEG-covered phospholipid monolayer with thicknesses of 3 and 6 nm for the base phospholipid monolayer and the covering PEG layer, respectively. The chemical anchoring efficiency ofpolymerized PEG and phospholipid molecules, which was calculated by the relative carbon ratio of each surface before and after methanol washing using X-ray photoelectron spectroscopy, was 98%. This polymerized PEG/phosholipid monolayer showed good stability in organic solution due to firm chemical anchoring to a solid surface.