Synthesis, Structural Characterization, and Oxidation-Reduction Behavior of the gamma-Isomer of the Dodecatungstosilicate Anion

The reaction of tungstate ions with the gamma-10-tungstosilicate in mixed water-ethanol (v/v) yields the corresponding isomer of the 12-tungstosilicate isolated as its tetrabutylammonium salt. It was characterized by means of (183)W NMR, infrared, Raman, and UV spectroscopies and was identified with the isomer resulting from the Keggin structure (alpha-isomer) by rotation of two tritungstic groups by pi/3. Cyclic voltammetry shows that the reducibility increases in the sequence alpha-beta-gamma as the number of rotated tritungstic groups. Whereas the gamma-12-tungstosilicate anion is unstable in pure aqueous solution whatever the pH value, it is stable in mixed aqueous-organic or pure organic solvents, even at boiling temperatures. In contrast, the two- and four-electron-reduced blue species are stable in aqueous media but not the one-electron-reduced blue. Study of the (183)W NMR spectrum of the two-electron-reduced species showed that the two spin-paired electrons are delocalized on all the W atoms on the NMR time scale but have a larger residency time on one group of four atoms.     

Addition conjuguee d'equivalents d'acyles aux cyclohexen-2 ones et a la Δ1(9) octalone-2: Synthese de dicetones 1–4.

The synthesis of 3-acetylcyclohexanones $\text{11}$, $\text{12}$, $\text{13}$ has been realized by conjugate addition of lithiated cyanohydrin ether $\text{1a}$ to 2-cyclohexenones $\text{2}$, $\text{3}$, $\text{4}$ in THF-HMPA, even if 3-substituted. 3-benzoylcyclohexanones $\text{14}$, $\text{15}$, $\text{16}$ are obtained from $\text{1b}$ and $\text{2}$, $\text{3}$, $\text{4}$ in THF with excellent yields.     

The six-membered annulation reaction involving sequential palladium-catalyzed allylic alkylation and Michael addition: scope and limitations

The palladium-catalyzed condensation of a variety of active methylene compounds with methyl 6-acetoxymethyl-hepta-2,6-dienoate was investigated. The six-membered adducts resulting from a η³ palladium complex alkylation-Michael addition sequence were obtained with moderate to good yields. In some cases, further evolution of the primary adduct was observed. The process has been expanded to access nitrogen heterocycles by using sodium p-toluenesulfonamide as the nucleophilic partner.     

Supercritical fluid extraction-capillary gas chromatography: On-line coupling with a programmed temperature vaporizer

A simple and versatile system is described for the on-line coupling of SFE to capillary GC. The interfacing consists of a programmed temperature vaporizer (PTV) injector. With this injector it is possible to combine solute trapping, elimination of a high flow of extraction fluid, and quantitative transfer of solutes to the seperation column. The problems caused by impurities in the extraction fluid in on-line SFE-GC are discussed. Simple methods are described for the purification of commercially available carbon dioxide. The trapping efficiency of the PTV injector is studied. Applications of the SFE-PTV-GC system are given for the analysis of polymer anti-degradants, polar compounds, and samples with environmental relevance.     

The determination of ammonia in flue gas from the selective catalytic reduction of nitric oxide with ammonia

The emission of NO_x from coal-fired boilers can be limited by means of the selective catalytic reduction of NO_x with ammonia. The amounts of unreacted ammonia downstream should be low to avoid processing and environmental problems. Continuous measurement of the ammonia in the flue gas is needed. The determination of ammonia and flue gas sampling techniques are discussed. Measurements of ammonia in exhausts of a laboratory reactor and of a pilot plant for the selective catalytic reduction of NO_x with ammonia are presented. Ammonia was determined by mass spectrometry and chemiluminescence in the gas phase, and by spectrophotometric (Nessler and Berthollet reactions) or potentiometry in aqueous solution, in low (<5 μl l^?1) and high (<1000 μl l^?1) concentration ranges.     

Automated determination of fatty acid methyl ester and cis/trans methyl ester composition of fats and oils

The determination of the fatty acid composition (as methyl esters, FAMEs) of fats and oils and their cis/trans (CTME) distribution requires a simple, but manual and time-consuming sample preparation. The so-called BF3 method is often the preferred procedure. Because FAME/CTME analyses are encountered very frequently in the food industry, an automated, robot-based alternative is proposed which uses the sodium methylate procedure. After sample weighing and the (manual) addition of heptane (2 min), a XYZ robotic autosampler is used for all remaining work, which includes reagent addition, agitation, sample settling and the final injection into the gas chromatograph (10 min). The performance of the sodium methylate and BF3 methods are compared by analysing some 30 oil and fat samples. The novel procedure is much faster (less than 15 min versus ca. 1 h) and manual sample handling is drastically decreased. The experimental results obtained with the two methods frequently are the same, while small differences can be explained by (known) differences of the two methods in the conversion of minor oil/fat constituents, such as free fatty acids, wax esters and sterol esters. In case of FAME analyses, a hot injection is to be preferred over a cold injection. The RSDs of the peak areas were 1.5% for the major fatty acids to 11% for peaks that were just above the noise level. The detection limit were approximately 0.03%.     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

(Eta3-phenylallyl)(phosphanyloxazoline)palladium complexes: X-ray crystallographic studies,NMR investigations,and Ab initio/DFT calculations

All possible (eta(3)-allyl)palladium complexes (1-4) of the ligand (4S)-[2-(2'-diphenylphosphanyl)phenyl]-4,5-dihydro-4-(2-propyl)-oxazole (L 1) and eta(3)-allyl ligands with one to three phenyl substituents at the terminal allylic centers were synthesized and characterized by X-ray crystal structure analysis and, with respect to allylic isomers, by NMR investigations. Equilibrium geometries, electronic structures, and relative energies of isomeric complexes were computed by restricted Hartree-Fock (RHF) and density functional theory (DFT) calculations; experimentally determined isomer ratios could be reproduced. The results allowed important conclusions to be drawn regarding the mechanism of Pd-catalyzed asymmetric allylic substitutions.