Enhancement of second harmonic generation efficiency: Growth and characterization of magnesium(II)-doped tetrakis(thiourea)nickel(II) chloride crystals

The influence of magnesium doping on the properties of tetrakis(thiourea)nickel(II) chloride crystals has been described. The reduction in the intensity observed in powder X-ray diffraction of doped specimen and slight shifts in vibrational frequencies confirm the lattice stress as a result of doping. Surface morphological changes due to doping of the alkaline earth metal are observed by scanning electron microscopy. The incorporation of Mg(II) into the crystal lattice was confirmed by energy dispersive X-ray spectroscopy. Lattice parameters are determined by single crystal XRD analysis. The thermogravimetric and differential thermal analysis studies reveal the purity of the materials and no decomposition is observed up to the melting point. The crystal is further characterized by Kurtz powder technique and dielectric studies.     

Conformational evolution of TFSI− in protic and aprotic ionic liquids

We here report on the conformational evolution of the bis(trifluoromethanesulfonyl)imide anion (TFSI⁻) in protic and aprotic TFSI⁻‐based ionic liquids as a function of temperature. The investigation is performed by Raman spectroscopy in the spectral ranges 240‐380 cm⁻¹ and 715‐765 cm⁻¹, where the interference from bands due to the cations is negligible. The contribution from each TFSI⁻ conformation, i.e. the cisoid (C₁) and the transoid (C₂), is quantified in order to estimate the enthalpy of conformational change, ΔH, which is found to be in the range 3.4–7.3 kJ/mol in the liquid state. Conformational information is for the first time determined from the 740 cm⁻¹ band, which previously mainly has been used as an indicator of ion‐ion interactions. The similarity in ΔH values obtained from the two spectral ranges demonstrates the validity of using also the 740 cm⁻¹ band for the quantification of the TFSI conformational evolution. Copyright © 2010 John Wiley & Sons, Ltd.     

IRMM-3100a: A new certified isotopic reference material with equal abundances of 233U, 235U, 236U and 238U

The new so-called Quad-IRM (“Quadruple Isotope Reference Material”) was prepared from highly enriched ²³³U, ²³⁵U, ²³⁶U and ²³⁸U isotopic materials using an optimized combination of gravimetrical mixing and mass spectrometry. Within the mixing process the isotope ratios were adjusted to about n(²³³U)/n(²³⁵U)/n(²³⁶U)/n(²³⁸U) = 1/1/1/1 and certified with expanded relative uncertainties of 0.0054% per mass unit (coverage factor k = 2). This new isotope reference material is ideal for verifying the inter-calibration of multi-detector systems in isotope mass spectrometry.The certified n(²³³U)/n(²³⁶U) ratio of IRMM-3100a was derived from the mass metrology data of the gravimetrical mixing of highly enriched ²³³U and ²³⁶U materials. It was verified by thermal ionization mass spectrometry (TIMS) measurements using the classical total evaporation (TE) and modified total evaporation (MTE) methods. The n(²³⁴U)/n(²³⁶U), n(²³⁵U)/n(²³⁶U) and n(²³⁸U)/n(²³⁶U) ratios were then determined by TIMS using the n(²³³U)/n(²³⁶U) ratio for internal normalization and using a multi-dynamic measurement procedure in order to circumvent any possible influence and uncertainties from Faraday cup efficiencies and amplifier gain factors. The certified n(²³⁵U)/n(²³⁶U) and n(²³⁸U)/n(²³⁶U) ratios were additionally verified using the classical and modified total evaporation methods using two TIMS instruments at IRMM and one TIMS instrument at IAEA-SGAS. The verification data can be regarded as results obtained at three independent instruments at two different nuclear safeguards laboratories.     

Ion-ion and ion-solvent interactions in lithium imidazolide electrolytes studied by Raman spectroscopy and DFT models

Molecular level interactions are of crucial importance for the transport properties and overall performance of ion conducting electrolytes. In this work we explore ion-ion and ion-solvent interactions in liquid and solid polymer electrolytes of lithium 4,5-dicyano-(2-trifluoromethyl)imidazolide (LiTDI)-a promising salt for lithium battery applications-using Raman spectroscopy and density functional theory calculations. High concentrations of ion associates are found in LiTDI:acetonitrile electrolytes, the vibrational signatures of which are transferable to PEO-based LiTDI electrolytes. The origins of the spectroscopic changes are interpreted by comparing experimental spectra with simulated Raman spectra of model structures. Simple ion pair models in vacuum identify the imidazole nitrogen atom of the TDI anion to be the most important coordination site for Li(+), however, including implicit or explicit solvent effects lead to qualitative changes in the coordination geometry and improved correlation of experimental and simulated Raman spectra. To model larger aggregates, solvent effects are found to be crucial, and we finally suggest possible triplet and dimer ionic structures in the investigated electrolytes. In addition, the effects of introducing water into the electrolytes-via a hydrate form of LiTDI-are discussed.     

Influence of transition metal doping on tris(thiourea)zinc(II) sulphate crystals

Optical, thermal and dielectric properties of Ni(II)-doped tris(thiourea)zinc(II) sulphate single crystals grown by slow evaporation solution growth technique has been investigated. The lattice parameters of the as-grown crystals were obtained by single crystal X-ray diffraction analysis. The modes of vibrations of different functional groups present were identified by FT-IR studies. The surface morphological changes are observed in the doped specimen. The structure and the crystallinity of the material were confirmed by powder X-ray diffraction analysis. The UV–vis optical absorption spectrum shows the lower optical cut-off at ∼284 nm and the crystals are transparent in the entire visible region. The relative second harmonic generation efficiency measurements reveal the enhancement of efficiency by doping with small quantities of Ni(II).     

Absorption and fluorescence spectroscopy of growing ZnO quantum dots: size and band gap correlation and evidence of mobile trap states

ZnO nanoparticles constitute a convenient model system for fundamental studies with many possible technical applications in, for example, sensors and the field of catalysis and optoelectronics. A large set of ZnO quantum dots in the size range 2.5-7 nm have been synthesized and analyzed in detail. Time resolved in situ UV-vis absorption measurements were used to monitor the growth of these particles in solution by correlating the optical band gap to particle size given from X-ray diffraction (XRD) measurements. The particles formed were isotropic in shape, but small initial deviations gave indications of a transition from thermodynamic to kinetically controlled growth for particles around 4 nm in diameter. On the basis of this, the behavior and mechanisms for the particle growth are discussed. The fluorescence dependence on particle size was investigated by combining fluorescence and UV-vis measurements on growing particles. This revealed that the positions of the fluorescence trap states are mobile toward the conduction- and valence band. A broadening of the trap states was also found, and a surface dependent mechanism of the trap state shift and broadening is proposed.     

Determination of the content and identity of lidocaine solutions with UV-visible spectroscopy and multivariate calibration

A method is proposed for the determination of the content and identity of the active compound in pharmaceutical solutions by means of ultraviolet-visible (UV-Vis) spectroscopy, orthogonal signal correction (OSC) and multivariate calibration with soft independent modelling of class analogy (SIMCA) classification and partial least squares (PLS) regression. The content was determined with PLS regression and the identity with PLS regression and SIMCA classification. The method was tested on the local anaesthetic compound lidocaine. For the validation, external test sets of both manufactured sample solutions and samples from a stability study were used. For comparison with this new method, liquid chromatography was used as a reference method. The results show that in respect of accuracy, precision and repeatability, the new method is comparable to the reference method. The main advantage over liquid chromatography is the much shorter time of analysis and the simpler analytical procedure. An estimate of the analysis time saved with the proposed method compared with using liquid chromatography, together with practical considerations, is given.     

A class of convolution integral equations involving a generalized polynomial set

The aim of this paper is to derive a solution of a certain class of convolution integral equation of Fredholm type whose kernel involves a generalized polynomial set. Our main result is believed to be general and unified in nature. A number of (known or new) results follow as special cases, simply by specializing the coefficients and parameters involved in the generalized polynomial set. For the sake of illustration, some special cases are mentioned briefly.     

An inter-calibration campaign using various selected Pu spike isotopic reference materials

In nuclear safeguards, precise and accurate isotopic analyses are needed for two major elements from the nuclear fuel cycle: uranium and plutonium. This can be achieved by Isotope Dilution Mass Spectrometry (IDMS), which is one of the most reliable analytical techniques for the determination of plutonium amount content to a high level of accuracy. In order to achieve reliable isotope measurements isotopic reference materials with certified amount of plutonium and isotopic composition are required. At the Institute for Reference Materials and Measurements (IRMM) various plutonium spike reference materials for isotopes ²³⁹Pu, ²⁴⁰Pu, ²⁴²Pu and ²⁴⁴Pu are available. This enabled the setup of an inter-calibration campaign inter-linking selected plutonium spikes on a metrological basis applying state-of-the-art measurement procedures. The aim of this campaign is threefold: firstly to perform measurements on selected plutonium spike isotopic reference materials for quality control purposes, secondly to verify the amount content and the isotopic composition of the recently produced IRMM-1027m large sized dried (LSD) spikes and thirdly to demonstrate IRMM’s measurement capabilities for plutonium analysis via external quality tools. The obtained results using various spike isotopic reference materials will be presented and discussed in this paper. The measurement uncertainties of the IDMS results were calculated according to the guide to the expression of uncertainty in measurement (GUM).     

Graded lie algebras of depth one

To each simply connected topological space is associated a graded Lie algebra; the rational homotopy Lie algebra. The Avramov-Felix conjecture says that for a space of finite Ljusternik-Schnirelmann category this Lie algebra contains a free Lie subalgebra on two generators. We prove the conjecture in the case when the Lie algebra has depth one.