SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE, REGIOSELECTIVE POLYCYCLOTRIMERIZATION

A new bis(aroylacetylene) containing tfiazole and fluorene moieties is synthesized by click chemistry. Polycyclotrimerization of the monomer is catalyzed by piperidine in refluxed dioxane,furnishing a regioregular poly(aroylarylene) in a satisfactory yield.The hyperbranched structure of the polymer is characterized spectroscopically with satisfactory results.The polymer enjoys no metal detriment and is soluble in common organic solvents such as tetrahydrofuran (THF),chloroform,dichloromethane (DCM),and N...     

Restriction of Intramolecular Motions: The General Mechanism behind Aggregation‐Induced Emission

Aggregation‐induced emission (AIE) has been harnessed in many systems through the principle of restriction of intramolecular rotations (RIR) based on mechanistic understanding from archetypal AIE molecules such as tetraphenylethene (TPE). However, as the family of AIE‐active molecules grows, the RIR model cannot fully explain some AIE phenomena. Here, we report a broadening of the AIE mechanism through analysis of 10,10′,11,11′‐tetrahydro‐5,5′‐bidibenzo[a,d][7]annulenylidene (THBDBA), and 5,5′‐bidibenzo[a,d][7]annulenylidene (BDBA). Analyses of the computational QM/MM model reveal that the novel mechanism behind the AIE of THBDBA and BDBA is the restriction of intramolecular vibration (RIV). A more generalized mechanistic understanding of AIE results by combining RIR and RIV into the principle of restriction of intramolecular motions (RIM).     

Fluorescent "light-up" bioprobes based on tetraphenylethylene derivatives with aggregation-induced emission characteristics

Aggregation in poor solvents and complexation with calf thymus DNA and bovine serum albumin turn "on" the fluorescence of tetraphenylethylene derivatives, due to the restriction of intra-molecular rotations of the dyes in the aggregates and complexes.     

聚{11-[(4'-正庚氧基-4-联苯基)羰基]氧-1-十一炔}的相结构与相转变

采用示差扫描量热法(DSC)、一维(1D)、二维(2D)广角X-射线衍射(WAXD)和偏光显微镜(PLM)等研究手段对聚{11-[(4'-正庚氧基-4-联苯基)羰基]氧-1-十一炔}(PA-9,7)的本体相转变和相结构进行研究,并采用分子动力学方法对相结构进行模拟.结果表明,样品的相转变为近晶B相(SmB)(→)近晶A相(SmA)(→)各向同性态(Iso).在近晶B相中,侧链在层状结构中排列成具有六次对称性的准长程有序结构.     

Ultrasonic acoustic wave detection of single or capillary electrophoretically resolved underivatized amino acids

Acoustic wave detection of various underivatized amino acids that were hydrodynamically introduced into and electrokinetically migrated along a capillary tube has been achieved. The detection principle is based on the measurement of the ultrasonic absorption and density change of the aqueous amino acid samples as they pass by the detection zone. Acoustic wave detection of underivatized leucine was obtained in the ultrasonic frequency range of 100 kHz to 20 MHz. This was accomplished by measuring the insertion loss from the vector ratio of the signal voltage to the source voltage obtained at the generating and receiving piezoelectric transducers. Linear concentration dependence of the insertion loss of underivatized leucine was established. The effects of capillary internal diameter, capillary geometry (square and circular), buffer concentration, buffer pH and acoustic wave frequency on the insertion loss were investigated. Subsequently, separations of underivatized amino acids (leucine/histidine and leucine/tryptophan) were performed under different buffer conditions and different capillary geometry.     

Aggregation‐Induced Delayed Fluorescence Luminogens for Efficient Organic Light‐Emitting Diodes

Aggregation‐induced delayed fluorescence (AIDF) can be regarded as a special case of aggregation‐induced emission (AIE). Luminogens with AIDF can simultaneously emit strongly in solid state and fully utilize the singlet and triplet excitons in organic light‐emitting diodes (OLEDs). In this work, two new AIDF luminogens, DMF‐BP‐DMAC and DPF‐BP‐DMAC, with an asymmetric D–A–D′ structure, are designed and synthesized. The characteristics of both luminogens are systematically investigated, including single crystal structures, theoretical calculations, photophysical properties and thermal stabilities. Inspired by their AIDF nature, the green‐emission non‐doped OLEDs based on them are fabricated, which afford good electroluminescence performances, with low turn‐on voltages of 2.8 V, high luminance of 52560 cd m^?2, high efficiencies of up to 14.4 %, 42.3 cd A^?1 and 30.2 lm W^?1, and very small efficiency roll‐off. The results strongly indicate the bright future of non‐doped OLEDs on the basis of robust AIDF luminogens.     

Electrochemical impedance spectroscopy of ZnO nanostructures

The paper reports on the use of electrochemical impedance spectroscopy to determine the doping character and carrier density of freshly prepared and annealed ZnO nanostructures. The ZnO nanostructures were obtained by chemical oxidation of metallic Zn in a 5% N,N-dimethylformamide (DMF) aqueous solution at 95 °C for 24 h. The as-grown nanostructured ZnO samples display a high donor density of 3.71 ± 0.88 × 10²¹ cm^?3. Annealing at 100 and 200 °C did not have any effect on the donor density while thermal annealing at 300 °C in air for 1 h induced a decrease in the doping concentration without affecting the surface morphology.     

Time-Dependent Photodynamic Therapy for Multiple Targets: A Highly Efficient AIE-Active Photosensitizer for Selective Bacterial Elimination and Cancer Cell Ablation

Pathogen infections and cancer are two major human health problems. Herein, we report the synthesis of an organic salt photosensitizer (PS), called 4TPA-BQ, by a one-step reaction. 4TPA-BQ presents aggregation-induced emission features. Owing to the aggregation-induced reactive oxygen species generated and a sufficiently small ΔE_ST, 4TPA-BQ shows a satisfactorily high ¹O₂ generation efficiency of 97.8 %. In vitro and in vivo experiments confirmed that 4TPA-BQ exhibited potent photodynamic antibacterial performance against ampicillin-resistant Escherichia coli with good biocompatibility in a short time (15 minutes). When the incubation duration persisted long enough (12 hours), cancer cells were ablated efficiently, leaving normal cells essentially unaffected. This is the first reported time-dependent fluorescence-guided photodynamic therapy in one individual PS, which achieves ordered and multiple targeting simply by varying the external conditions. 4TPA-BQ reveals new design principles for the implementation of efficient PSs in clinical applications.     

One stone,three birds: one AIEgen with three colors for fast differentiation of three pathogens

Visually identifying pathogens favors rapid diagnosis at the point-of-care testing level. Here, we developed a microenvironment-sensitive aggregation-induced emission luminogen (AIEgen), namely IQ–Cm, for achieving fast discrimination of Gram-negative bacteria, Gram-positive bacteria and fungi by the naked-eye. With a twisted donor–acceptor and multi-rotor structure, IQ–Cm shows twisted intramolecular charge transfer (TICT) and AIE properties with sensitive fluorescence color response to the microenvironment of pathogens. Driven by the intrinsic structural differences of pathogens, IQ–Cm with a cationic isoquinolinium moiety and a membrane-active coumarin unit as the targeting and interacting groups selectively locates in different sites of three pathogens and gives three naked-eye discernible emission colors. Gram-negative bacteria are weak pink, Gram-positive bacteria are orange-red and fungi are bright yellow. Therefore, based on their distinctive fluorescence response, IQ–Cm can directly discriminate the three pathogens at the cell level under a fluorescence microscope. Furthermore, we demonstrated the feasibility of IQ–Cm as a visual probe for fast diagnosis of urinary tract infections, timely monitoring of hospital-acquired infection processes and fast detection of molds in the food field. This simple visualization strategy based on one single AIEgen provides a promising platform for rapid pathogen detection and point-of-care diagnosis.

A simple AIEgen with three emission colors achieves rapid identification of Gram-negative bacteria, Gram-positive bacteria and fungi.     

Fluorescent Bioprobes: Structural Matching in the Docking Processes of Aggregation‐Induced Emission Fluorogens on DNA Surfaces

Whereas most conventional DNA probes are flat disklike aromatic molecules, we explored the possibility of developing quadruplex sensors with nonplanar conformations, in particular, the propeller‐shaped tetraphenylethene (TPE) salts with aggregation‐induced emission (AIE) characteristics. 1,1,2,2‐Tetrakis[4‐(2‐triethylammonioethoxy)phenyl]ethene tetrabromide (TPE‐ 1 ) was found to show a specific affinity to a particular quadruplex structure formed by a human telomeric DNA strand in the presence of K⁺ ions, as indicated by the enhanced and bathochromically shifted emission of the AIE fluorogen. Steady‐state and time‐resolved spectral analyses revealed that the specific binding stems from a structural matching between the AIE fluorogen and the DNA strand in the folding process. Computational modeling suggests that the AIE molecule docks on the grooves of the quadruplex surface with the aid of electrostatic attraction. The binding preference of TPE‐ 1 enables it to serve as a bioprobe for direct monitoring of cation‐driven conformational transitions between the quadruplexes of various conformations, a job unachievable by the traditional G‐quadruplex biosensors. Methyl thiazolyl tetrazolium (MTT) assays reveal that TPE‐ 1 is cytocompatible, posing no toxicity to living cells.