Medium effects on fluorescence quantum yields and lifetimes for coumarin laser dyes

Fluorescence quantum yields and lifetimes of coumarin dyes are sharply reduced in polar solvents if amine substituent groups are free to rotate. The polar solvent effect is interpreted in terms of relaxation of excited dye from an initial planar conformation to a twisted zwitterionic state.     

Low temperature carbene-to-carbene homologations

Since alkynes have higher symmetry than olefins, it is not easy to infer the mechanism of a triplet carbene’s addition to an alkyne by traditional product analysis studies. Specifically, no stereochemical information which might offer insight into the carbene’s spin state can be extracted from the cyclopropene products. In 1971, Hendrick, Baron, and Jones showed that diphenylcarbene reacts with terminal alkynes in solution to produce indenes via a “self-trapping” vinylcarbene. They also examined the diphenylcarbene reaction with disubstituted alkynes and found at most trace amounts of the “self-trapping” indene product. In this work, we report the direct observation by organic matrix EPR of the vinylcarbenes generated from triplet fluorenylidene and terminal alkynes. Our efforts to confirm the identities of these intermediates by independent synthesis, intermolecular trapping, and an intramolecular “self-trapping” method-halogen-migration-are also recounted. These findings are among the few instances in which fluorenylidene undergoes carbon-carbon bond formation rather than atom abstraction reactions in a low-temperature matrix, and in which the biradical adduct of a triplet carbene and a π-bonded substrate can be directly observed.     

Peptides—XXXVII: Synthesis of the 1–37 fragment of a lysozyme analogue

Combination of the protected peptide fragments 1–16, 17–26 and 27–37 to yield the 1–37 portion of a lysozyme analogue is described. The fragments were combined using DCCI with the addition of HONSu, and the products purified mainly by gel filtration.     

Occurrence of Neighboring Group Participation Reactions in Amide-N and Amidine Complexes Derived from Pentaammine(dinitrile)cobalt(III) Ions

N-Bonded pentaamminecobalt(III) complexes of 2-cyanobenzamide, 2-cyanoacetamide, and fumaric, succinic, glutaric, and adipic amide-nitriles have been prepared. The kinetics of the base hydrolysis of (succinonitrile)pentaamminecobalt(III) have been measured: k(obsd) = k(OH) [OH(-)]; k(OH) = 1.23 x 10(3) {I = 1.00 M (NaCH(3)COO), 25 degrees C}. Amido-N-coordinated 2-cyanobenzamide cyclized in aqueous base, and it forms [(1-oxo-3-iminoisoindolino-endo-N)pentaamminecobalt(III). In aqueous acid it protonates on the exo-imine and solvolyzes (k(H) = 7.9 x 10(-)(5) s(-)(1)), forming the pentaammineaquacobalt(III) complex and 1-oxo-3-iminoisoindoline. In aqueous acid the amido-N complexes are protonated on the amide oxygen. The 2-cyanobenzamide species rearranges to form the nitrile-bonded linkage isomer in aqueous acid and also in Me(2)SO-d(6), while the succinic amide nitrile complex rearranges more slowly in aqueous acid to form solely the nitrile-bonded linkage isomer. The kinetics of the reaction were k(obsd) = f(k(H)[H(+)]/(K(a) + [H(+)])) where k(H) = 3.4 x 10(-)(4) M(-)(1) s(-)(1) and K(a) = 6.76 x 10(-)(2) M, pK(a) 1.2; pK(a) 1.3 (spectrophotometric) {I = 1.00 M (LiClO(4).3H(2)O), 25 degrees C}. In Me(2)SO-d(6) this amide-N complex reacts by three pathways: solvolysis, amide-N to -O isomerization, and amide-N to nitrile-bonded rearrangement (10%). The conjugate acid of the 2-cyanoacetamido-N complex reacted in both aqueous acid and acidified Me(2)SO-d(6) by solvolysis, amide N to O isomerization, and amide-N to nitrile-bonded rearrangement (17% in each solvent). The fumaric, glutaric, and adipic amide-nitrile complexes bonded through the amide nitrogen react only by solvolysis and amide-N to -O isomerization. Pentaamminecobalt(III) complexes of 2-cyanobenzamidine and succinic, glutaric, and adipic amidine-nitriles bonded through the amidine secondary nitrogen have been prepared. The 2-cyanobenzamidine complex undergoes rapid ligand cyclization to form the corresponding complex of 1,3-diiminoisoindoline bonded through the deprotonated endocyclic nitrogen. In aqueous acid the complex is protonated on one of the exo-imines, and this solvolyzes to form the pentaammineaquacobalt(III) complex and 1,3-diiminoisoindoline {k(H) = 1.7 x 10(-)(3) s(-)(1) (0.5 M HCl, 25 degrees C). Coordinated succinic amidine-nitrile also cyclizes in liquid ammonia to yield the complex of 2,5-diiminopyrrolidine bonded through the deprotonated endocyclic nitrogen. This is stable in aqueous base but solvolyzes rapidly (t(1/2) (s)) in aqueous acid to the aqua complex and succinimide; the latter is formed by hydrolysis of the free 2,5-diiminopyrrolidine. The dinuclear complex &mgr;-decaammine(succinonitrile)dicobalt(III) was synthesized; in aqueous base it forms &mgr;-(succinamido-N)decaamminecobalt(III). The dinuclear dinitrile complex reacts in liquid ammonia to form the corresponding succinic amidine-nitrile species which cyclizes rapidly to form &mgr;-decaammine(2,5-diiminopyrrolidino)cobalt(III) in which the ligand is bonded to cobalt(III) through the exo-imines.     

Liquid crystal polymers. IX. Copolyesters of trans-4,4′-stilbenedicarboxylic acid, 1,4-butanediol,and aromatic dicarboxylic acids

Copolyesters of trans-4,4-stilbenedicarboxylic acid (SDA), terephthalic acid, and 1,4-butanediol exhibit thermotropic liquid crystallinity if at least 40 mol % SDA is present (acids total 100 mol %); SDA/2,6-naphthalenedicarboxylic acid/1,4-butanediol copolyesters are liquid crystalline if at least 30 mol % SDA is present. The effects of SDA content on the thermal, rheological, plastic, and fiber properties of the copolyesters were determined. The SDA component increases the relaxation times of the polymers and enables injection-molded plastics and melt-spun fibers to have significantly increased tensile strength and stiffness.     

Einige bestrahlungsexperimente mit 2, 1-Benzisothiazolen

Some Irradiation Experiments with 2, 1-Benzisothiazoles 2, 1-Benzisothiazole ( 1 ) on irradiation with a mercury high-pressure lamp in benzene/diethylamine yields, after acetylation, 2-acetylamino-benzaldehyde ( 3 ; Scheme 1). Similarly, irradiation of 3-chloro-2, 1-benzisothiazole ( 2 ) in benzene/diethylamine leads to a mixture of 3-dimethylamino-2, 1-benzisothiazole ( 6a ) and N, N-diethyl-thioanthranilamide ( 7a ; Scheme 2). Benzisothiazole 6a , on irradiation, is not transformed into 7a . On the other hand, when 2 is irradiated in methanol a mixture of 3-methoxy-2, 1-benzisothiazole ( 4a ) and methyl anthranilate ( 5a ; Scheme 2) is obtained. In this case, 4a on irradiation in methanol or ethanol also yields 5a . No exchange of the methoxy group in 4a is observed when the irradiation is performed in ethanolic solution. Thus, 2, 1-benzisothiazoles 1 , 2 and 4a react photochemically by N,S-bond cleavage and hydrogen-atom abstraction from the solvent (Scheme 3). 3-Chloro-2, 1-benzisothiazole ( 2 ) shows a second photoreaction, i.e. nucleophilic exchange of the chloro substituent by methanol or diethyl amine. The latter reaction can also be observed thermally, e.g. in boiling methanol in the presence of methoxide ions.     

酸性化合物在十二胺-N,N-二亚甲基膦酸改性氧化锆固定相上的分离

酸性化合物在十二胺-N; N-二亚甲基膦酸改性氧化锆固定相上的分离;氧化锆;色谱固定相;十二胺-N; N-二亚甲基膦酸     

Determination by X-ray absorption spectroscopy of the Fe-Fe separation in the oxidized form of the hydroxylase of methane monooxygenase alone and in the presence of MMOD

The diiron active site in the hydroxylase of Methylococcus capsulatus (Bath) methane monooxygenase (MMOH) has been studied in the oxidized form by X-ray absorption spectroscopy (XAS). Previous investigations by XAS and X-ray crystallography have identified two different distances (3.0 and 3.4 angstroms) between the two Fe atoms in the dinuclear site. The present study has employed a systematic extended X-ray absorption fine structure (EXAFS) fitting methodology, utilizing known and simulated active site and relevant model structures, to determine unambiguously the Fe-Fe separation in the oxidized form of MMOH. Consistent and unique fits were only possible for an Fe-Fe distance of 3.0 angstroms. This methodology was then applied to study potential changes in the active site local structure in the presence of MMOD, a protein of unknown function in multicomponent MMO. Fe K-edge and EXAFS analyses revealed negligible changes in the diiron site electronic and geometric structure upon addition of MMOD to oxidized MMOH.     

Cinnamolid‐3β‐ol hemihydrate and 3β‐hydroxycinnamolide acetate,two drimanolide‐class sesquiterpene lactones from Warburgia ugandensis

3β‐Hydr­oxy‐7‐drimen‐12,11‐olide hemihydrate, C₁₅H₂₂O₃·0.5H₂O, (I), has two sesquiterpene mol­ecules and one water mol­ecule in the asymmetric unit. The OH groups of both mol­ecules and both H atoms of the water mol­ecule are involved in near‐linear inter­molecular hydrogen bonds, having O⋯O distances in the range 2.632 (3)–2.791 (2) Å. 3β‐Acet­oxy‐7‐drimen‐12,11‐olide, C₁₇H₂₄O₄, (II), has its ring system in very nearly the same conformation as the two mol­ecules of (I).     

On-line laser desorption/ionization mass spectrometry of matrix-coated aerosols

Matrix-assisted laser desorption/ionization (MALDI) was used for the on-line analysis of single particles. An aerosol was generated at atmospheric pressure and particles were introduced into a time-of-flight (TOF) mass spectrometer through a single-stage differentially pumped capillary inlet. Prior to entering the mass spectrometer, a matrix was added to the particles using a heated saturator and condenser. A liquid matrix, 3-nitrobenzyl alcohol (NBA), and a solid matrix, picolinic acid (PA), were used. Particles were ablated with a 351 nm excimer laser and the resulting ions were mass-separated in a two-stage reflectron TOF mass spectrometer. Aerosol particles containing the biomolecules erythromycin and gramicidin S were analyzed with and without the matrix addition step. The addition of NBA to the particles resulted in mass spectra that contained an intact molecular ion mass peak. In contrast, PA-coated particles did not yield molecular ion peaks from matrix-coated particles.