The effect of nanoparticle shape on polymer‐nanocomposite rheology and tensile strength

Nanoparticles can influence the properties of polymer materials by a variety of mechanisms. With fullerene, carbon nanotube, and clay or graphene sheet nanocomposites in mind, we investigate how particle shape influences the melt shear viscosity η and the tensile strength τ, which we determine via molecular dynamics simulations. Our simulations of compact (icosahedral), tube or rod‐like, and sheet‐like model nanoparticles, all at a volume fraction ? ≈ 0.05, indicate an order of magnitude increase in the viscosity η relative to the pure melt. This finding evidently can not be explained by continuum hydrodynamics and we provide evidence that the η increase in our model nanocomposites has its origin in chain bridging between the nanoparticles. We find that this increase is the largest for the rod‐like nanoparticles and least for the sheet‐like nanoparticles. Curiously, the enhancements of η and τ exhibit opposite trends with increasing chain length N and with particle shape anisotropy. Evidently, the concept of bridging chains alone cannot account for the increase in τ and we suggest that the deformability or flexibility of the sheet nanoparticles contributes to nanocomposite strength and toughness by reducing the relative value of the Poisson ratio of the composite. The molecular dynamics simulations in the present work focus on the reference case where the modification of the melt structure associated with glass‐formation and entanglement interactions should not be an issue. Since many applications require good particle dispersion, we also focus on the case where the polymer‐particle interactions favor nanoparticle dispersion. Our simulations point to a substantial contribution of nanoparticle shape to both mechanical and processing properties of polymer nanocomposites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1882–1897, 2007     

Electrochemical reduction of Bi2Sr2Ca1Cu2O8 superconductor single crystals

Single crystals and polycrystalline pellets of the high-temperature cuprate superconductor Bi₂Sr₂Ca₁Cu₂O₈ were doped at room temperature by electrochemical reduction at > 95% Coulombic efficiency using lithium dopant ions in propylene carbonate electrolyte. Cyclic voltammetry and potential step measurements on single crystals suggest an unusual reduction mechanism, with a diffusion coefficient for Li⁺ in the c-axis direction of bulk superconductor of ca. 3 × 10⁻¹¹ cm²s⁻¹. Sintered pellets of polycrystalline powder could be doped more rapidly, with an apparent diffusion coefficient of 7 × 10⁻⁸ cm²s⁻¹. X-ray susceptibility analysis show extensive disordering occurs on heavy Li doping, with a first-order transition from a crystalline/superconducting to an amorphous/non-superconducting phase. Single, crystals of Bi₂Sr₂Ca₁Cu₂O₈ exhibited a color change on reduction from metallic gray to golden bronze. The reduced material was highly air-sensitive, forming a hydroxide surface film on exposure to ambient atmosphere.     

TGF-β1 induction of the adenine nucleotide translocator 1 in astrocytes occurs through Smads and Sp1 transcription factors

Background  

The adenine nucleotide translocator 1 (Ant1) is an inner mitochondrial membrane protein involved with energy mobilization during oxidative phosphorylation. We recently showed that rodent Ant1 is upregulated by transforming growth factor-beta (TGF-β) in reactive astrocytes following CNS injury. In the present study, we describe the molecular mechanisms by which TGF-β1 regulates Ant1 gene expression in cultured primary rodent astrocytes.     

Student Attitudes and Calculus Reform

This paper compares the attitudes about mathematics of students from traditionally taught calculus classes and those from a “reformed” calculus course. The paper is based on three studies, which together present a consistent picture of student attitudes about calculus reform. The reformed course appeared to violate students' deeply held beliefs about the nature of mathematics and how it should be learned. Although during their first months in the reformed course most students disliked it, their attitudes gradually changed. One and 2 years after, reform students felt significantly more than the traditionally taught students that they better understood how math was used and that they had been required to understand math rather than memorize formulas.     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

Implicitly representing arrangements of lines or segments

Anarrangement ofn lines (or line segments) in the plane is the partition of the plane defined by these objects. Such an arrangement consists ofO(n ²) regions, calledfaces. In this paper we study the problem of calculating and storing arrangementsimplicitly, using subquadratic space and preprocessing, so that, given any query pointp, we can calculate efficiently the face containingp. First, we consider the case of lines and show that with (n) space¹ and (n ^3/2) preprocessing time, we can answer face queries in (n)+O(K) time, whereK is the output size. (The query time is achieved with high probability.) In the process, we solve three interesting subproblems: (1) given a set ofn points, find a straight-edge spanning tree of these points such that any line intersects only a few edges of the tree, (2) given a simple polygonal path , form a data structure from which we can find the convex hull of any subpath of quickly, and (3) given a set of points, organize them so that the convex hull of their subset lying above a query line can be found quickly. Second, using random sampling, we give a tradeoff between increasing space and decreasing query time. Third, we extend our structure to report faces in an arrangement of line segments in (n ^1/3)+O(K) time, given(n ^4/3) space and (n ^5/3) preprocessing time. Lastly, we note that our techniques allow us to computem faces in an arrangement ofn lines in time (m ^2/3 n ^2/3+n), which is nearly optimal.The first author is pleased to acknowledge the support of Amoco Fnd. Fac. Dev. Comput. Sci. 1-6-44862 and National Science Foundation Grant CCR-8714565. Work on this paper by the fifth author has been supported by Office of Naval Research Grant N00014-87-K-0129, by National Science Foundation Grant NSF-DCR-83-20085, by grants from the Digital Equipment Corporation, and the IBM Corporation, and by a research grant from the NCRD—the Israeli National Council for Research and Development. The sixth author was supported in part by a National Science Foundation Graduate Fellowship. This work was begun while the non-DEC authors were visiting at the DEC Systems Research Center.     

High-tech breakthrough DNA scanner for reading sequence and detecting gene mutation

The 17″×14″ X-ray film, gels, and blots are widely used in DNA research. However, DNA laser scanners are costly and unaffordable for the majority of surveyed biotech scientists who need it. The high-tech breakthrough analytical personal scanner (PS) presented in this report is an inexpensive 1 lb hand-held scanner priced at 2–4% of the bulky and costly 30–95 lb conventional laser scanners. This PS scanner is affordable from an operation budget and biotechnologists, who originate most science breakthroughs, can acquire it to enhance their speed, accuracy, and productivity. Compared to conventional laser scanners that are currently available only through hard-to-get capital-equipment budgets, the new PS scanner offers improved spatial resolution of 20 μm, higher speed (scan up to 17″×14″ molecular X-ray film in 48 s), 1–32,768 gray levels (16-bits), student routines, versatility, and, most important affordability. Its programs image the film, read DNA sequences automatically, and detect gene mutation. In parallel to the wide laboratory use of PC computers instead of mainframes, this PS scanner might become an integral part of a PC-PS powerful and cost-effective system where the PS performs the digital imaging and the PC acts on the data.