Vitamin B12 as an allosteric cofactor; dual fluorescence, hysteresis, oscillations and the selection of corrin over porphyrin

Studies of the emission spectra of four Co(III) cobinamides (diaquo-, aquohydroxo-, dihydroxo- and dicyano-) show (1) that the excited states corresponding to the alphabeta and epsilon absorption bands behave like the S(1) and S(2) levels in the non-alternant hydrocarbon azulene (with emission from S(2)> S(1) in violation of Kasha's rule) and (2) that the excited states include a TICT (twisted intramolecular charge transfer) mechanism, as in the simpler cyanines, but where the TICT state gives rise to dual fluorescence instead of cis-trans isomerisation. Combined with the previously reported dual fluorescence from the S(1) level in synthetic metal corrinoids and in the naturally-occurring metal-free corrin, this provides evidence that the existence of an additional (metastable) ground state with a significantly different vibronic splitting and nuclear configuration is an intrinsic property of the basic corrin ligand (irrespective of the nature of the side-chains and the metal ion or even the absence of a metal) which distinguishes it from porphyrin. The occurrence of hysteresis (and its associated oscillations) in redox reactions of the cobinamides involving both the Co(III/II) and Co(II/I) couples indicates that the corrin ligand also has an intrinsic ability to exist in different conformations or "allosteric" forms with differing redox potential, which further distinguishes it from the porphyrin ligand. Possible links between the existence of an additional metastable ground state and of allosteric changes and the likely reasons for the selection of corrin over a porphyrin for the vitamin B(12)-dependent enzymes are discussed.     

Multivariate analysis of extremely large ToFSIMS imaging datasets by a rapid PCA method

Principal component analysis (PCA) and other multivariate analysis methods have been used increasingly to analyse and understand depth profiles in X‐ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and secondary ion mass spectrometry (SIMS). These methods have proved equally useful in fundamental studies as in applied work where speed of interpretation is very valuable. Until now these methods have been difficult to apply to very large datasets such as spectra associated with 2D images or 3D depth‐profiles. Existing algorithms for computing PCA matrices have been either too slow or demanded more memory than is available on desktop PCs. This often forces analysts to ‘bin’ spectra on much more coarse a grid than they would like, perhaps even to unity mass bins even though much higher resolution is available, or select only part of an image for PCA analysis, even though PCA of the full data would be preferred. We apply the new ‘random vectors’ method of singular value decomposition proposed by Halko and co‐authors to time‐of‐flight (ToF)SIMS data for the first time. This increases the speed of calculation by a factor of several hundred, making PCA of these datasets practical on desktop PCs for the first time. For large images or 3D depth profiles we have implemented a version of this algorithm which minimises memory needs, so that even datasets too large to store in memory can be processed into PCA results on an ordinary PC with a few gigabytes of memory in a few hours. We present results from ToFSIMS imaging of a citrate crystal and a basalt rock sample, the largest of which is 134GB in file size corresponding to 67 111 mass values at each of 512 × 512 pixels. This was processed into 100 PCA components in six hours on a conventional Windows desktop PC. © 2015 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd.     

Field induced formation of mesoscopic polymer chains from functional ferromagnetic colloids

The assembly and direct imaging of ferromagnetic nanoparticles into one-dimensional mesostructures (1-D) are reported. Polymer-coated ferromagnetic colloids (19 nm, 24 nm) were assembled at a crosslinkable oil-water interface under both magnetic field induced and zero-field conditions and permanently fixed into 1-D mesoscopic polymer chains (1-9 mum) in a process referred to as Fossilized Liquid Assembly (FLA). In the FLA process, nanoparticle chains were fixed at the oil interface through photopolymerization, enabling direct visualization of organized mesostructures using atomic force microscopy. Using the FLA methodology, we systematically investigated different conditions and demonstrated that dispersed ferromagnetic colloids possess sufficient dipolar interactions to organize into mesoscopic assemblies. Application of an external magnetic field during assembly enabled the formation of micron-sized chains which were aligned in the direction of the applied field. This universal methodology is an attractive alternative technique to cryogenic transmission electron microscopy (cryo-TEM) for the visualization of nanoparticle assembly in dispersed organic media.     

Fourier transform infrared studies of alternate acid-amine Langmuir-Blodgett films with pyroelectric properties

FTIR-RAIRS and ATR techniques are shown to provide a powerful means of investigating the molecular behaviour responsible for the pyroelectric properties of organic monolayer assemblies on silicon and aluminised glass. Spectral changes, associated with either proton transfer or head group rearrangement, are well correlated with the level of pyroelectric response for two different devices. The technique promises to be extremely important for the elucidation of the microscopic properties of molecular electronic devices.     

Preparation of (R)-11-hydroxyaporphine directly from (R)-10,11-dihydroxyaporphine ((R)-apomorphine)

A Regioselective synthesis of (R)-11-hydroxyaporphine 2 directly from (R)-10,11-dihydroxyaporphine ((R)-apomorphine, 1 ) is described for the first time. The isopropylidene ketal ring of 10,11-(isopropyl-idenyldioxy)aporphine 5 obtained by the isopropylidenation of apomorphine was regioselectively opened by ten equivalents of trimethylaluminum to give (R)-10-hydroxy-11-tert-butyloxyaporphine 6 . The free 10-hydioxyl position of 6 was triflated with N-pbenyltrifluoromethanesulfonimide and potassium carbonate under reflux to give (R)-10-[(trifluoromethyl)sulfonyloxy]-11-tert-butyloxyaporphine 7 . The reduced product, 11-tert-butyloxyaporphine 8 was prepared from 7 by a palladium-catalyzed hydrogenolysis. The ether cleavage of (R)-11-tert-butyloxyaporphine with 48% hydrobromic acid afforded the desired (R)-11-hydroxyaporphine 2 in good yield.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

A molecular orbital study of trans-polyenes to 18 double bonds

Calculations involving molecular orbitals have appeared in the chemical literature over the past few years, but all have used smalltrans-polyenes. We now report extended Huckel molecular orbital calculations ontrans-polyenes of up to 18 double bonds (36 carbons and 38 hydrogen atoms). Information obtained from these calculations include total energies, bond gaps, and net charges on each atom. Also found is that the band gap approaches 1.41 eV as the number of double bonds approaches infinity. This value is quite close to reported experimental values. Data are also presented for polyenes assuming equal C-C bond lengths.     

Characterization of the solvation environment provided by dilute aqueous solutions of novel siloxane polysoaps using the fluorescence probe pyrene

Solubilization environment afforded by several of the novel allyl glycidyl ether-modified methylhydrosiloxane polymers are investigated using a common polycyclic aromatic hydrocarbon fluorescence probe, pyrene. The backbone of the polymer has been modified by the addition of an alkyl chain of varying length (either C8, C12, or C18) and to differing degrees of substitution. The nomenclature adopted for the purposes of these studies is as follows: "AGENT" represents the backbone polymer with no alkyl substitution, and "OAGENT", "DAGENT", and "SAGENT" are substituted with n-octyl, n-dodecyl, and n-octadecyl, respectively. The percentage of alkyl substitution is designated as 10, 15, and 20%. The pyrene polarity scale (defined as the ratio of the intensity of peak I to peak III) was used to determine the relative dipolarity of the cybotactic region provided by approximately 1 w/w% aqueous polymer solutions compared to 10 mM sodium dodecylsulfate (SDS) micellar solution. Results indicate that 10-15% DAGENT afforded the most hydrophobic solubilization site, followed by 15% OAGENT and 15% SAGENT. In addition, as the degree of alkyl substitution of DAGENT increased from 10 to 20%, the cybotactic region appeared to become more hydrophobic. Furthermore, a deeper investigation into the relative size of the solubilization site revealed that all alkyl-substituted polymers promoted excimer formation at relatively low pyrene concentrations, indicating the possibility of localized concentration enhancement within the solvation pockets and/or compartmentalization of the solute molecules. The pyrene fluorescence excitation data strongly indicates ground-state heterogeneity that is most prominent in AGENT and decreases as the alkyl chain length is increased. This provides a relative sense of the size and shape of the solvation pockets afforded by each polymer solution. An overall analysis of the collected data indicated that these alkyl-substituted polymers may provide a more selective and efficient pseudostationary phase in electrokinetic chromatography with better solvation capacity for hydrophobic compounds compared to SDS.