A novel method for serum lipoprotein profiling using high performance capillary isotachophoresis

A new capillary isotachophoresis (cITP) method for lipoprotein profiling with superior lipoprotein coverage compared to previous methods has been developed, resolving twice as many lipoprotein species (18 peaks/fractions) in serum or plasma in less than 9.5 min. For this, a novel mixture of 24 spacers, including amino acids, dipeptides and sulfonic acids, was developed and fine-tuned, using predictive software (PeakMaster) and testing of spiked serum samples. Lipoprotein peaks were identified by serum-spiking with reference lipoproteins. Compatibility with common lipophilic stains for selective lipoprotein detection with either UV/Vis or laser-induced fluorescence was demonstrated. A special new capillary with a neutral coating (combining water-compatible OV1701-OH deactivation and methylation) was used for the first time for electrodriven separations, allowing very stable separations in a pH 8.8–9.4 gradient system, being functional for more than 100 injections. Excellent reproducibility was achieved, with coefficients of variation lower than 2.6% for absolute migration times. Comparison was performed with human plasma samples analyzed by NMR, leading to similar results with cITP after multivariate statistics, regarding group-clustering and lipoprotein species correlation. The new cITP method was applied to the analysis of serum samples from a LDL receptor knock-out mice model fed either a normal diet or a western-type diet. Differences in the lipoprotein levels and in the sublipoprotein types were detected, showing a shift to more atherogenic particles due to the high cholesterol diet. In summary, this novel method will allow more detailed and informative profiling of lipoprotein particle subtypes for cardiovascular disease research.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

Flow-injection determination of total organic fluorine with off-line defluorination reaction on a solid sorbent bed

Considering recent reports on widespread occurrence and concerns about perfluoroalkyl substances (PFAS) in environmental and biological systems, analysis of these compounds have gained much attention in recent years. Majority of analyte-specific methods are based on a LC/MS/MS or a GC/MS detection, however many environmental or biological studies would benefit from a total organic fluorine (TOF) determination. Presented work was aimed at developing a method for TOF determination. TOF is determined as an amount of inorganic fluoride obtained after defluorination reaction conducted off-line using sodium biphenyl reagent directly on the sorbent without elution of retained analytes. Recovered fluoride was analyzed using flow-injection system with either fluorimetric or potentiometric detection. The TOF method was tested using perfluorocarboxylic acids (PFCA), including perfluorooctanoic acid (PFOA), as model compounds. Considering low concentrations of PFAS in natural samples, solid-phase extraction as a preconcentration procedure was evaluated. Several carbon-based sorbents were tested, namely multi-wall carbon nanotubes, carbon nanofibres and activated carbon. Good sorption of all analytes was achieved and defluorination reaction was possible to carry out directly on a sorbent bed. Recoveries obtained for PFCAs, adsorbed on an activated carbon sorbent, and measured as TOF, were 99.5 ± 1.7, 110 ± 9.4, 95 ± 26, 120 ± 32, 110 ± 12 for C4, C6, C8, C10 and C12-PFCA, respectively. Two flow systems that would enable the defluorination reaction and fluoride determination in a single system were designed and tested.     

Spatial structure of β-substituted alkoxyvinyl trifluoromethyl ketones

Spatial structure of six β-substituted enones, with common structure R₁O–CR₂CH–COCF₃, were R₁ = C₂H₅, R₂ = H (ETBO); R₁ = R₂ = CH₃ (TMPO); R₁ = C₂H₅, R₂ = C₆H₅ (ETPO); R₁ = C₂H₅, R₂ = 4- O₂NC₆H₄ (ETNO); R₁ = C₂H₅, R₂ = C(CH₃)₃ (ETDO) were investigated by ¹H and ¹⁹F NMR, infrared spectroscopy and AM1 calculations. NMR spectra revealed that enones (MBO), (ETBO) and (TMPO) are exclusively (3E) isomers, whereas in (ETPO), (ETNO) and especially in (ETDO) the percentage of (3Z) isomers is significant and depends on the nature of solvents. Conformational behaviour of studied enones are determined by the rotation around of CC double bond, C–C and C–O single bonds (correspondingly trifluoroacetyl and alkoxy groups), and (EZZ) conformer being the most stable in all cases. IR spectra revealed that with the exception of (ETDO) (EZZ) conformer is most populated in all cases. Bulky substituents like phenyl or tert-butyl group at β-position of enone result in the equilibrium mainly between (EZZ) and (ZZZ) forms, whereas β-hydrogen and β-methyl substituents determine the equilibrium between (EZZ) and (EEZ) or (EZE) conformers.     

Development in Synthesis,Electrochemistry, LB Moieties of Phenothiazine Based Units

A convenient and higher yielding synthetic route to N‐alkyl‐bis(thiophene)phenothiazine derivatives is reported and their aggregation, electrochemical properties and polymerization are characterized. The key step in the synthesis of this group of compounds has been the Stille type coupling reaction between the N‐alkyldibromophenothiazine and tin derivatives of thiophene as the best way for preparation of conjugated N‐alkylphenothiazine derivatives. For this group of compounds we also present an electrochemical polymerization effect and widely adopted approach to prepare structurally ordered thin, electroconducting films by Langmuir–Blodgett technique.