Spectrofluorometric Determination of Methocarbamol in Pharmaceutical Preparations and Human Plasma

A simple, sensitive and rapid spectrofluorometric method for determination of methocarbamol in pharmaceutical formulations and spiked human plasma has been developed. The proposed method is based on the measurement of the native fluorescence of methocarbamol in methanol at 313 nm after excitation at 277 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.05–2.0 μg/mL, with good correlation (r = 0.9999), limit of detection of 0.007 μg/ mL and a lower limit of quantification of 0.022 μg/ mL. The described method was successfully applied for the determination of methocarbamol in its tablets without interference from co-formulated drugs, such as aspirin, diclofenac, paracetamol and ibuprofen, The results obtained were in good agreement with those obtained using the official method (USP 30).The high sensitivity of the method allowed the determination of the studied drug in spiked human plasma with average percentage recovery of 99.42 ± 3.84.     

Reaction of Mercaptoacetate and Halides Containing Activated Methylenes with Thiocarbamoylimidates: A Novel Approach to the Synthesis of Aminothiazole Derivatives

The reaction of N-thiocarbamoylimidates 1 with methyl thioglycolate leads to the formation of 4-arylamino-5-methoxycarbonylthiazoles 2. The condensation of the same imidates 1 on ethyl bromoacetate, benzyl bromide and chloroacetonitrile provides the corresponding 2-arylaminothiazoles 4.      

Calculation of kinetic parameters from TG curve on the base of dehydration process of hydrous titanium dioxide

A direct method of evaluating of kinetic equation parameters based on TG curve is proposed. The method was applied to calculate kinetic parameters of the process of dehydration of hydrous titanium dioxide.

---

Zusammenfassung Es wird ein direktes Verfahren zur Bestimmung der Parameter der kinetischen Gleichung auf der Basis von TG-Kurven gegeben. Das Verfahren wurde zur Berechnung der kinetischen Parameter des Dehydratationsprozesses von wasserhaltigem Titandioxid benutzt.

     

Reduction of the Kondo temperature in low temperature deposited alloy films of CuFe

The low temperature resistance anomaly has been investigated in highly disordered $\text{Cu}$Fe films (50–200 ppm) after quench condensation and after annealing of the films at different temperatures, which reduces the degree of disorder. An analysis of the data shows that with respect to the films annealed at room temperature and to bulk samples the Kondo temperature of a disordered film is reduced by a factor of two.     

Preconcentration methods for the determination of trace elements in water by x-ray fluorescence spectrometry: Part 1. Response characteristics

Seven methods for the preconcentration of the elements Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Ag, Cd, Sb, Hg, Tl, and Pb in trace quantities from water have been evaluated. All the methods involved incorporation of the dissolved species into a solid resulting in large concentration factors and yielded samples well-suited to quantitation by either energy- or wavelength-dispersive x-ray fluorescence. On the basis of measurable criteria such as method sensitivity, linear range, and overall reproducibility, a scheme for ranking the seven methods is proposed. Application of such a rating scheme has enabled an objective, critical comparison of the available methods to be made on the basis of performance characteristics.     

Simulation and Experimental Study for Degradation of Organic Dyes Using Dual pin‐to‐plate Corona Discharge Plasma reactors for Industrial Wastewater Treatment

This work researches the possibility of increasing the dye removal efficiency from wastewater using nonthermal plasma. A study for the optimal air gap distance between dual pin and surface of Acid Blue 25 dye solution and thickness of ground plate is carried out using 3D‐EM simulator to find maximum electric field intensity at the tip of both pins. The consequences display that the best gap for corona discharge is approximately 5 mm using 15 kV source. In addition, the optimum plate thickness is 0.1 mm. These distance and thickness were mentioned are constant during the study of other factors. Dual pin‐to‐plate high‐voltage corona discharge plasma system is presented to investigation experimentally the gap distance, thickness of ground plate, initial dye concentration, pH solution and conductivity on the amount of Acid Blue 25 dye color removal efficiency from wastewater. There is a large consensus among the simulation and experimental work in the air gap and thickness of ground plate. Where the decolorization for air gap 5 mm is 95.74 at time 35 min compared with 91% and 17% for 1 mm and 20 mm gap distance respectively. Also, the discharge energy at each air gap are calculated. Measurement results for the impact of thickness of an Aluminum ground plate on color removal competence showed color removal efficiencies of 86.3%, 90.78% and 98.06%, after treatment time 15 min for thicknesses of 2, 0.5 and 0.1 mm respectively. The decolorization behavior utilizing dual pin‐to‐plate corona discharge plasma system display 82% pigment evacuation proficiency inside 11min. The complete decolorization was accomplished within 28min for distinctive examined introductory color focuses 5 ppm up to 100 ppm. Likewise, the impacts of conductivity by utilizing diverse salts as AlCl3, CaCl2, KCl and NaCl and with distinctive focuses have been explored. The rising of the solution conductivity leads to the reduction of decolorization efficiency. The decolorization efficiency and discharge energy are calculated at different concentration molarity for AlCl3, CaCl2, KCl and NaCl. It was observed that the presence of salts at the same concentration level substantially decreased the rate and the extent of decolorization. The results indicate that the optimum pH for the decolorization of Acid Blue 25 dye is in the range between 3 and 6. Furthermore the conductivity and discharge energy were measurement at each value of pH. Energy yield for decolorization and Electrical Energy per Order (EE/O) under different initial pH value were calculated. A kinetic model is used to define the performance of corona discharge system under different value of pH. The model of pseudo ‐zero, pseudo‐first order, and pseudo‐second order reactions kinetic are utilized to investigate the decolorization of Acid Blue 25 dye. The rate of degradation of Acid Blue 25 dye follows the pseudo‐first order kinetics in the dye concentration. Energy consumption requirements for decolorization was considered. The outcomes will be useful for designing the plasma treatment systems suitable for industrial wastewaters. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Isoconversional kinetics of degradation of polyvinylpyrrolidone used as a matrix for ammonium nitrate stabilization

Thermogravimetric analyzer (TGA) has been applied to measure the kinetics of the thermal degradation of virgin polyvinylpyrrolidone (PVP) and a phase stabilized PVP–ammonium nitrate (AN) material. The PVP–AN samples have been prepared by using 20 wt.% of AN and PVP of three different molecular weights. Virgin PVP undergoes a major mass loss in the region 380–550 °C leaving a small amount of nonvolatile residue. The application of an advanced isoconversional method to the respective degradation process demonstrates that its effective activation energy increases from 70 kJ mol⁻¹ to a plateau value at 250–300 kJ mol⁻¹, which is independent of the molecular weight. The PVP–AN materials lose spontaneously 20% of their mass on heating above the glass transition temperature of the PVP matrix (160–180 °C). After the escape of AN, the remaining PVP matrix degrades in the same temperature region as virgin PVP, however, the effective activation energy of this degradation is 150–200 kJ mol⁻¹.     

Synthesis and Insecticidal Efficacy of Novel Bis Quinazolinone Derivatives

A novel bis benzoxazin‐4‐one derivative has been synthesized and utilized to construct a new series of bis quinazolin‐4(3H)‐one derivatives via the reactions with different nitrogen nucleophiles namely, primary amines (ammonia, ethanolamine, and 4‐aminoantipyrine), secondary amines (morpholine and piperidine), diamine (o‐phenylenediamine), hydrazine hydrate, and hydroxylamine. The insecticidal efficacy of newly synthesized compounds was also studied. The structural features of the synthesized compounds were assigned by spectral analysis.     

Sustainable Development of Chitosan/Calotropis procera-Based Hydrogels to Stimulate Formation of Granulation Tissue and Angiogenesis in Wound Healing Applications

The formation of new scaffolds to enhance healing magnitude is necessarily required in biomedical applications. Granulation tissue formation is a crucial stage of wound healing in which granulation tissue grows on the surface of a wound by the formation of connective tissue and blood vessels. In the present study, porous hydrogels were synthesized using chitosan incorporating latex of the Calotropis procera plant by using a freeze–thaw cycle to stimulate the formation of granulation tissue and angiogenesis in wound healing applications. Structural analysis through Fourier transform infrared (FTIR) spectroscopy confirmed the interaction between chitosan and Calotropis procera. Latex extract containing hydrogel showed slightly higher absorption than the control during water absorption analysis. Thermogravimetric analysis showed high thermal stability of the 60:40 combination of chitosan (CS) and Calotropis procera as compared to all other treatments and controls. A fabricated scaffold application on a chick chorioallantoic membrane (CAM) showed that all hydrogels containing latex extract resulted in a significant formation of blood vessels and regeneration of cells. Overall, the formation of connective tissues and blood capillaries and healing magnitude decreased in ascending order of concentration of extract.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).