急性子中总皂苷的含量测定

采用香草醛-冰醋酸-高氯酸显色法,以齐墩果酸为对照,分光光度法测定急性子中总皂苷的含量.经显色后,齐墩果酸在541nm处有最大吸收,并在7.327-25.64μg/mL范围内吸光度与齐墩果酸量呈良好线性关系(r=0.9996),方法平均回收率为98.7％(n=6),RSD为0.51％.该方法简便、准确、灵敏,可以快速测...     

UPLC-MS/MS测定土壤中的甲磺隆、苄嘧磺隆残留

建立了超高效液相色谱串联质谱法检测土壤中甲磺隆、苄嘧磺隆残留的方法。土壤中的甲磺隆和苄嘧磺隆经C18固相萃取小柱萃取,然后用Waters Acquity UPLC BEH C18色谱柱（50mm×2.1mm,1.7μm）分离,以0.05%乙酸-甲醇为流动相进行梯度洗脱,流速0.4mL.min-1,采用正离子电喷雾电离模式测定,外标法定量。本方法简便、快速、准确、可靠,甲磺隆、苄嘧磺隆在1.0—100.0μg.L-1的浓度范围内呈良好的线性关系,相关系数（r）分别为0.9997和0.9999;检出限分别为0.02μg.kg-1和0.03μg.kg-1,回收率为86.2%—96.5%,相对标准偏差不大于5.1%。     

Generation of radially polarized mode using an active cylindrically symmetric birefringence fiber

A class of active fiber is presented as gain mediums of fiber lasers, where a silica layer with spoke-like air slits is introduced between the active core and cladding to obtain birefringence. With an appropriate choice of the design parameters, the fiber can support only the HE₁₁ and TM₀₁ modes. Furthermore, the numerical results show that, corresponding to the optimal rare earth doping profile, the fiber lasers can output a pure TM₀₁ mode with about 79% slope efficiency without using other mode-selective elements.     

Intersubband transitions in Al0.82In0.18N/GaN single quantum well

The influence of the width of a lattice-matched Al_0.82In_0.18N/GaN single quantum well (SQW) on the absorption coefficients and wavelength of the intersubband transition (ISBT) has been investigated by solving the Schrödinger and Poisson equations self-consistently. The wavelength of 1—2 ISBT increases with L, the thickness of the single quantum well, ranging from 2.88 μm to 3.59 μm. The absorption coefficients of 1—2 ISBT increase with L at first and then decrease with L, with a maximum when L is equal to 2.6 nm. The wavelength of 1—3 ISBT decreases with L at first and then increases with L, with a minimum when L is equal to 4 nm, ranging from approximately 2.03 μm to near 2.11 μm. The absorption coefficients of 1—3 ISBT decrease with L. The results indicate that mid-infrared can be realized by the Al_0.82In_0.18N/GaN SQW. In addition, the wavelength and absorption coefficients of ISBT can be adjusted by changing the width of the SQW.     

Unidirectional transmission realized by two nonparallel gratings made of isotropic media

We realize a unidirectional transmission by cascading two nonparallel gratings (NPGs) made of isotropic, lossless, and linear media. For a pair of orthogonal linear polarizations, one of the gratings is designed as a polarizer, which is a reflector for one polarization and a transmitter for the other; another grating is designed as a polarization converter, which converts most of one polarized incident wave into another polarized transmitted wave. It is demonstrated by numerical calculation that more than 85% of the incident light energy can be transmitted with less than 1% transmission in the opposite direction for linearly polarized light at normal incidence, and the relative bandwidth of the unidirectional transmission is nearly 9%. The maximum transmission contrast ratio between the two directions is 62 dB. Unlike one-way diffraction grating, the transmitted light of the NPGs is collinear with the incident light, but their polarizations are orthogonal.     

Breaking parameter degeneracy in interacting dark energy models from observations

We study the interacting dark energy model with time varying dark energy equation of state. We examine the stability in the perturbation formalism and the degeneracy among the coupling between dark sectors, the time-dependent dark energy equation of state and dark matter abundance in the cosmic microwave background radiation. Further we discuss the possible ways to break such degeneracy by doing global fitting using the latest observational data and we get a tight constraint on the interaction between dark sectors.     

基于多级组合棱镜提高激光中心波长检测精度的研究

为了在保证抗干扰能力不下降的条件下提高对激光中心波长的检测精度,设计了多级组合棱镜系统,并提出了多级组合棱镜的干涉条纹拼接处理方法及相位耦合的计算公式.通过计算多级组合棱镜的干涉图强度、光程差函数及光谱分辨率,分析了采用三块子棱镜的组合结构的光谱获取,给出了用于分段干涉条纹拼接的处理方法及步骤,最终光谱分辨率可达2.8...     

红色荧光粉NazCa1-x-2y-zBiyMoO4∶Eu3+x+y发光研究

采用高温固相法制备系列红色荧光粉Naz Ca1-x-2y-zBiyMoO4 ∶ Eu3+x+y (y,z=0,x=0.24,0.26,0.30,0.34,0.38; x=0.30,y=0.01,0.02,0.03,0.04,0.05,0.06,0.07,z=0; x=0.30,y=0.04,z=0.38).用X射线粉末衍射(XRD)法测试了所制样品晶相结构.采用荧光光谱仪对样品的发光性能进行了表征,结果表明:当Eu3+单掺杂量浓度x=0.30时,荧光粉(Ca0.70 MoO4∶Eu3+0.30)的发光强度最强;当Eu3+-Bi3+共掺杂量浓度y=0.03时,电荷迁移带(CTB)强度达到最强,而对于Eu3+特征发射峰,当共掺杂浓度y＜0.03时,位于393 nm处的激发峰强度比464 nm强,共掺浓度y＞0.03时,464 nm峰比393 nm峰强,共掺浓度为y=0.04时,393和464 nm处两峰位置强度都达到最强.作为电荷补尝剂的Na2 CO3掺入上述荧光粉中后,荧光粉激发和发射强度明显地增强.结果表明,通过调节Bi3+ /Eu3+掺杂比例可以改变位于近紫外光393 nm和蓝光区464 nm处激发光相对强度.