Synthesis of C2-symmetric trans-2,6-diarylpiperidinones via aryl cuprate addition: an unexpected stereochemical outcome

An efficient procedure for the preparation of trans-2,6-diaryl piperidinones has been developed. Addition of aryl Grignard reagents to 2-aryl dihydropyridones under catalytic copper promoted conditions generates the trans isomer exclusively, an unprecedented stereochemical event. The X-ray structures of both starting material and product have been solved and shed light on the steric constraints and substrate geometry leading to the observed product. The reaction conditions tolerate a variety of aromatic nucleophiles to generate C₂-symmetric products in good overall yields.     

Cluster Chemsitry. 96. Penta- and hexa-nuclear ruthenium cluster complexes derived from reactions of cyclopentadienes with Ru5(μ5-C2PPh2)(μ-PPh2)(CO)13

The reactions between Ru₅( ₅-C₂PPh₂)(gm-PPh₂(CO)₁₃ (1) and cyclopentadienes afforded the hexanuclear clusters Ru₆( ₆-C)( ₃-PPh₂)₂(CO)₁₀(-C₅ R ₅) [R ₅ = H₅ (2), H₄Me (3), Me₅ (4)] which contain an encapsulated carbide and a face-capping ₃-CH group, formed by cleavage of CC and CP bonds of the C₂PPh₂ moiety in1. In the reaction with cyclopentadiene, the unusual ligand C₁₃H₁₂O, formed by combination of C₂, CO and two molecules of C₅H₆ (or one molecule of dicyclopentadien), was characterized in the complex Ru₅( ₄-PPh) ( ₄-C₁₃H₁₂O)(-PPh₂(CO)₁₁(-C₅H₅) (5). In the reaction with pentamethylcyclopentadiene, the vinylidene complex Ru₅( ₃-CCHPh)( ₄-PPh)( ₄-PPh) (-PPh₂)(CO)₉(-C₅Me₅) (6) was also formed.     

Determination of trace impurities in tin by neutron activation analysis

A method was developed for the determination of 15 trace elements in tin. High-purity tin samples (99.9999% and 99.999%) as well as tin of technical quality were analysed. Reactor neutron activation of the tin samples was followed by distillation of the matrix activities from a HBr−H₂SO₄ medium and Ge(Li) gamma-ray spectrometry of the distillation residue. The sensitivity of the method is generally high. For the high-purity samples the detection limits vary from 0.02 ppb (scandium) to 200 ppb (iron) for irradiation of 1 g of tin for 1 week at a thermal flux of 5·10¹²n·cm⁻². ·sec⁻¹. To decontaminate the surface of the tin samples, pre- and post-irradiation etching procedures were applied. The efficiency of these etching techniques was studied.     

Automorphism groups of finite distributive lattices with a given sublattice of fixed points

For a latticeL, aL is a fixed point ofL if and only iff(a)=a for every automorphismf ofL. Let Aut (L) andS (L) denote the group of automorphisms ofL and the sublattice of fixed points ofL, respectively. It is shown that ifG is a finite group other thanZ ₂ ² ,Z ₂ ³ ,Z ₂ ⁴ ,Z ₃ ² or the quaternion group of order 8 andL is a finite automorphism free distributive lattice that is not near Boolean then there is a finite distributive latticeL such that Aut (L)G andS(L)L.The support of the National Research Council of Canada is gratefully acknowledged.     

Synthesis and electronic characterization of bipyridine dithiolate rhodium(III) complexes

Five new mixed diimine 1,1'-dithiolate or dithiocarbamate ligand complexes of the form [Rh(bpy)2(SS)][PF6]n, where bpy = 2,2'-bipyridine and SS = various substituted dialkyldithiocarbamates or 1,1'-dithiolates, were synthesized from cis-[Rh(bpy)2(OTf)2][OTf]. The triflate ligands are easily displaced by other ligands and allow these syntheses to proceed in high yields (80-90% overall) under relatively mild reaction conditions and to give high purity products. Electrochemistry shows irreversible two-electron reduction of Rh(III) to Rh(I) and a concomitant loss of one bipyridine ligand; this is followed by reversible one-electron reduction of the remaining 2,2'-bipyridine ligand. The electronic characterizations of these complexes are consistent with significant delocalization of the sulfur electron density onto the empty metal d orbitals. The 1,1'-dithiolate ligands induce larger red shifts in the absorption and emission spectra than the dithiocarbamates as the 1,1'-dithiolates have a more extensive conjugation system.     

Addition of palladium and platinum tri-tert-butylphosphine groups to Re-Sn and Re-Ge bonds

The reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3SnH at 68 degrees C yielded the new compound Re2(CO)8(mu-SnPh2)2 (10) which contains two SnPh2 ligands bridging two Re(CO)(4) groups, joined by an unusually long Re-Re bond. Fenske-Hall molecular orbital calculations indicate that the bonding in the Re2Sn2 cluster is dominated by strong Re-Sn interactions and that the Re-Re interactions are weak. The 119Sn M?ssbauer spectrum of 10 exhibits a doublet with an isomer shift (IS) of 1.674(12) mm s(-1) and a quadrupole splitting (QS) of 2.080(12) mm s(-1) at 90 K,characteristic of Sn(IV) in a SnA2B2 environment. The IS is temperature dependent, -1.99(14) x 10(-4) mm s(-1) K(-1); the QS is temperature independent. The temperature-dependent properties are consistent with the known Gol'danskii-Kariagin effect. The germanium compound Re2(CO)8(mu-GePh2)2 (11) was obtained from the reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3GeH. Compound 11 has a structure similar to that of 10. The reaction of 10 with Pd(PBu(t)3)2 at 25 degrees C yielded the bis-Pd(PBu(t)3) adduct, Re2(CO)8(mu-SnPh2)2[Pd(PBu(t)3)]2 (12); it has two Pd(PBu(t)3) groups bridging two of the four Re-Sn bonds in 10. Fenske-Hall molecular orbital calculations show that the Pd(PBu(t)3) groups form three-center two-electron bonds with the neighboring rhenium and tin atoms. The mono- and bis-Pt(PBu(t)3) adducts, Re2(CO)8(mu-SnPh2(2)[Pt(PBu(t)3)] (13) and Re2(CO)8(mu-SnPh2)2[Pt(PBu(t)3)]2 (14), were formed when 10 was treated with Pt(PBu(t)3)2. A mono adduct of 11, Re2(CO)8(mu-GePh2)2[Pt(PBu(t)3)] (15), was obtained similarly from the reaction of 11 with Pt(PBu(t)3)2.     

Mono- and dinuclear five-coordinate cyclometalated palladium(II) compounds

Reaction of cyclometalated halide-bridged Pd(II) complexes 1-4 with the tertiary triphosphine ligand (Ph2PCH2CH2)2PPh (triphos) yielded complexes [((Ph2PCH2CH2)2PPh-P,P,P)Pd(N(Cy)=(H)C)C6H2(C(H)=N(Cy))Pd((Ph2PCH2CH2)2PPh-P,P,P)][ClO4]2 5, [Pd(C6H4-N=NC6H5)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] 6, and [Pd(R-C6H3C(H)=NCy)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] (7; R = 4-CHO, 8; 3-CHO). Spectroscopic and analytic data suggest five-coordination on the palladium atom, which, for complexes 5, 6, and 7, was confirmed by X-ray crystallography. The geometry around palladium may be view as a distorted trigonal bipyramid, with the palladium, nitrogen, and terminal phosphorus atoms in the equatorial plane. Compound 5 is the first doubly cyclometalated palladium(II) compound with two pentacoordinated metal centers. The structure of 6 comprises two discrete cations with slightly different geometries, showing the importance of crystal packing forces in order to determine the coordination arrangement.     

Investigation of a stereoselective co-mediated rearrangement reaction

A stereocontrolled approach to alpha-alkyl beta-alkynyl cyclohexanones is reported through a Lewis acid mediated rearrangement reaction of enol ethers bearing an Co-alkyne moiety. The reaction proceeds with high levels of stereoselectivity in the presence of Ti- and B-Lewis acids to provide a range of alpha,beta-disubstituted cyclohexanones in high yield although the products are prone to epimerization at the alpha-position in the presence of the B-promoter system. The potential for an enantioselective variant of this process is outlined, and a rationale for the observed stereochemical trends and detailed structural analyses of the ketone products are described.     

Interferences in ultratrace speciation of organolead and organotin by gas chromatography with atomic spectrometric detection

Interferences in trace and ultratrace speciation analysis of organotin and organolead compounds in various samples by gas chromatography coupled with atomic absorption spectrometry (AAS) and/or microwave induced plasma atomic emission spectrometry (MIP AES) are investigated. Particular attention is given to the effects of matrix co-extractives and reagents impurities introduced during sample preparation. Their influence on the detection limits is discussed in terms of baseline noise level, blank value, formation of artefacts and signal suppression. Loss of column resolution during the analysis of some matrices is observed.