Pore assembled multilayers of charged polypeptides in microporous membranes for ion separation

In this study, highly permeable ion-selective membranes are prepared via immobilization of polyelectrolyte multilayer networks within the inner pore structure of a microporous (pore size = 0.2 microm) support. Electrostatic layer-by-layer assembly is achieved through alternate adsorption of cationic and anionic polyelectrolytes under convective flow conditions. To initiate pore assembly, the first layer consists of covalently bound charged polypeptides (poly(L-glutamic acid) (PLGA) or poly(L-lysine) (PLL)) establishing a charged support for subsequent adsorption. Nonstoichiometric immobilization of charged multilayers within a confined pore geometry leads to an enhanced volume density of ionizable groups in the membrane phase. This overall increase in the effective charge density allows for Donnan exclusion of ionic species (especially divalent co-ions) using microporous materials characterized by permeability values that exceed conventional membrane processes. Multilayer assemblies are fabricated using both PLGA/PLL and synthetic polyelectrolytes (poly(styrenesulfonate)/poly(allylamine)) in an attempt to compare the level of adsorption and separation properties of the resulting materials. The role of salt concentration in the carrier solvent on overall polyelectrolyte adsorption was examined to determine its effect on both solute (Cl-, SO4(2-), As(V)) and water transport. Constriction of the pore size induced by multilayer propagation was monitored through permeability measurements and dextran rejection studies at each stage of the deposition process.     

Reactive dications: the superacid-catalyzed reactions of alkynes bearing adjacent N-heterocycles or amine groups

A variety of aminoalkynes and related heterocycles are reacted in the Bronsted superacid CF(3)SO(3)H (triflic acid), and products are obtained in generally good yields (69-99%) from Friedel-Crafts-type reactions. The reactions are consistent with the formation of novel dicationic intermediates having a vinyl cationic site and an adjacent protonated N-heterocycle or ammonium cation.     

Perylene-based profluorescent nitroxides for the rapid monitoring of polyester degradation upon weathering: An assessment

A profluorescent nitroxide possessing an isoindoline nitroxide moiety linked to a perylene fluorophore was developed to monitor radical mediated degradation of melamine-formaldehyde crosslinked polyester coil coatings in an industry standard accelerated weathering tester. Trapping of polyester-derived radicals (most likely C-radicals) that are generated during polymer degradation leads to fluorescent closed-shell alkoxy amines, which was used to obtain time-dependent degradation profiles to assess the relative stability of different polyesters towards weathering. The nitroxide probe couples excellent thermal stability and satisfactory photostability with high sensitivity and enables detection of free radical damage in polyesters under conditions that mimic exposure to the environment on a time scale of hours rather than months or years required by other testing methods. There are indications that the profluorescent nitroxide undergoes partial photo-degradation in the absence of polymer-derived radicals. Unexpectedly, it was also found that UV-induced fragmentation of the NO–C bond in closed-shell alkoxy amines leads to regeneration of the profluorescent nitroxide and the respective C-radical. The maximum fluorescence intensity that could be achieved with a given probe concentration is therefore not only determined by the amount of polyester radicals formed during accelerated weathering, but also by the light-driven side reactions of the profluorescent nitroxide and the corresponding alkoxy amine radical trapping products. Studies to determine the optimum probe concentration in the polymer matrix revealed that aggregation and re-absorption effects lowered the fluorescence intensity at higher concentrations of the profluorescent nitroxide, but too low probe concentrations, where these effects would be avoided, were not sufficient to trap the amount of polyester radicals formed upon weathering. The optimized experimental conditions were used to assess the impact of temperature and UV irradiance on polymer degradation during accelerated weathering.     

Versatile diastereoselectivity in formal [3,3]-sigmatropic shifts of substituted 1-alkenyl-3-alkylidenecyclobutanols and their silyl ethers

A new method for the preparation of highly substituted cyclohexenones is reported. [2 + 2] Cycloaddition of 2-silyloxydienes with allenecarboxylate affords the 1-alkenyl-3-alkylidenecyclobutanol silyl ethers. Thermolysis of these compounds affords the methylene cyclohexenyl silyl ethers with excellent exo selectivity (>95:5) when monosubstituted alkenyl groups are used, while the use of disubstituted alkenyl groups gives generally low selectivity ( approximately 2:1). However, rearrangement of the anion of the cyclobutanol (prepared by acidic hydrolysis of the TMS silyl ether) at low temperature gives the endo product with good to excellent diastereoselectivity (5-23:1). Two different mechanistic rationales are given for the two different processes: the first via a diradical and the second via a cleavage intramolecular Michael addition. Thus, the same starting material (e.g., 20) can be converted into either the exo or endo product, 22x or 22n, with good diastereocontrol by just changing the rearrangement conditions.     

Entropically Driven Self‐Assembly of Lysinibacillus sphaericus S‐Layer Proteins Analyzed Under Various Environmental Conditions

S‐Layer proteins are an example of bionanostructures that can be exploited in nanofabrication. In addition to their ordered structure, the ability to self‐assembly is a key feature that makes them a promising technological tool. Here, in vitro self‐assembly kinetics of SpbA was investigated, and found that it occurs at a rate that is dependent on temperature, its concentration, and the concentration of calcium ions and sodium chloride. The activation enthalpy (120.81 kJ · mol^?1) and entropy (129.34 J · mol^?1 · K^?1) obtained infers that the incorporation of monomers incurs in a net loss of hydrophobic surface. By understanding how the protein monomers drive the self‐assembly at different conditions, the rational optimization of this process was feasible.

     

Palladium-catalyzed benzylation of N-Boc indole boronic acids

The direct benzylation of indole 2-boronic acid can be efficiently achieved using trans-PdBr(N-Succ)(PPh₃)₂, alleviating the need for strong bases or toxic organotin reagents. Under these reaction conditions substituted indole-2-boronic acids and substituted benzyl bromides are cross-coupled to afford aryl(indolo)methanes in good yield.     

Concerted C-N and C-H bond formation in a magnesium-catalyzed hydroamination

Coordinatively saturated To(M)MgMe (1; To(M) = tris(4,4-dimethyl-2-oxazolinyl)phenylborate) is an active precatalyst for intramolecular hydroamination/cyclization at 50 °C. The empirical rate law of -d[substrate]/dt = k'(obs)[Mg](1)[substrate](1) and Michaelis-Menten-type kinetics are consistent with a mechanism involving reversible catalyst-substrate association prior to cyclization. The resting state of the catalyst, To(M)MgNHCH(2)CR(2)CH(2)CH═CH(2) [R = Ph, Me, -(CH(2))(5)-], is isolable, but isolated magnesium amidoalkene does not undergo unimolecular cyclization at 50 °C. However, addition of trace amounts of substrate allows cyclization to occur. Therefore, we propose a two-substrate, six-center transition state involving concerted C-N bond formation and N-H bond cleavage as the turnover-limiting step of the catalytic cycle.