流动场对膜层层组装过程的影响

分别在层层组装膜的沉积和淋洗步骤中引入流动场, 用紫外-可见光谱对多层膜的组装过程进行了跟踪, 用原子力显微镜对膜的表面粗糙度进行了观察, 用X射线反射(XRR)对膜的厚度和粗糙度进行了评估. 实验结果表明, 在沉积步骤中, 流动场可以促进高分子与组装基底的接触, 从而提升组装速度; 而在淋洗步骤中, 搅拌下的流动场不仅可以冲洗掉膜表面物理吸附的高分子, 还能够降低膜的粗糙度, 使得膜表面更加平整.     

An expedient one-pot synthesis of highly substituted imidazoles using supported ionic liquid-like phase（SILLP） as a green and effcient catalyst and evaluation of their anti-microbial activity

An effcient method for the synthesis of imidazole derivatives by a three-component condensation of benzil or 9,10-phenanthrenequinone,aldehydes and ammonium acetate using supported ionic liquidlike phase（SILLP）catalyst under ultrasonic irradiation or classical heating conditions is reported.The present methodology offers several advantages,such as excellent yields,simple procedures,short reaction times,simple work-up and mild conditions.The catalyst is easily separated from the products by fltration and also exhibits remarkable reusable activity.These highly substituted imidazoles were also evaluated for their anti-microbial activity.     

One-pot Sequential Reaction for the Synthesis of Polysubstituted 3-（3-Nitro-2-phenylchroman-4-yl）-3-arylaminoacrylates

The one-pot sequential reaction of arylamines, methyl propiolate and 2-aryl-3-nitrochromenes without any catalyst in refluxing ethanol afforded the polysubstituted 3-（3-nitro-2-phenylchroman-4-yl）-3-arylaminoacrylates in good yields and with high diastereoselectivity. Reaction mechanism was believed involving the initial formation of β-enamino ester and sequential Michael addition.     

气相滴定在臭氧计量标准溯源中的应用

利用臭氧和一氧化氮发生快速反应生成二氧化氮的原理,设计气相滴定反应系统,通过对参加反应的一氧化氮标准气体浓度变化的准确测定,计算出组分臭氧混合气体的浓度。利用设计的气相滴定系统（GPT）,对基于紫外分光原理的臭氧测量标准装置SRP41产生的空气中臭氧标准气体进行了比对及相互验证。比对结果表明：二者偏差不大于2．6％,均在分析不确定度范围内等效。这为臭氧测量计量溯源问题提供了解决方案。     

丙烯酸β-羧乙酯-苯乙烯共聚物缩合异烟肼的合成及其水解释放研究

<正> 大分子载体药物是精细高分子合成的一个重要研究领域,作为药物载体的大分子骨架需有良好的生物相容性及控制释放能力。本文采用具有较长柔性侧支链的丙烯酸β-羧乙酯(APA)-苯乙烯(St)共聚物作载体,并通过羧基与抗结核药物异烟肼反应,制备出毒性较低并能控制释放的大分子载体异烟肼药物。     

石墨炉原子吸收分光光度法测定血清中铜

铜系人体内含有的微量元素。测定血清中Cu/Zn比值,有助于病因分析和提供诊断依据。目前,测定血清铜所用的仪器分析方法甚多。本法无需对血清样进行预处理,取样量仅20—50μl。碱金属和碱土金属卤化物无干扰。特征质量m。为5.6pg/0.0044A.S,回收率98～102%,变异系数1.7-2.7%。     

Prototype of immunochromatographic assay strips using colloidal CdTe nanocrystals as biological luminescent label

Colloidal semiconductor nanocrystals have attracted considerable attention as a novel biological luminescent label. The bioinorganic conjugates of luminescent CdTe nanocrystals and protein, including CdTe/BSA (bovine serum albumin) and CdTe/MAB (mouse monoclonal antibody against hepatities B surface antigen), were formed via electrostatic/coordination self-assembly. Pure CdTe nanocrystals, CdTe/BSA and CdTe/MAB were used in the immunochromatographic assay experiments, respectively. And the results indicated that CdTe nanocrystals could be used and developed as a novel label with good stability, high sensitivity and facile determination of several analytes in immunochromatographic assay strips.     

Third Generation Horseradish Peroxidase Biosensor Based on Self-assembling Carbon Nanotubes to Gold Electrode Surface

Carbon nanotube (CNT) is a novel carbon material discovered by Iijima1. It had beenfound to have the ability to promote electron transfer reactions when it was used tofabricate electrodes for the oxidation of biomolecules2-4. Just recently, the interest indemonstrating CNT for biosensing applications is now emerging5-10. However, most ofthese biosensors were based on CNT paste electrode or CNT modified glassy carbonelectrode by casting technology. Here, we reported another assembly…     

糖和H_8-BINOL衍生的单齿亚磷酸酯配体的合成及其Rh催化α-脱氢氨基酸不对称氢化反应的研究

由单糖(如果糖、葡萄糖和甘露醇)和H8-2,2'-联萘二酚出发设计和合成了的六个手性单齿亚磷酸酯配体,研究了其铑配合物催化α-脱氢氨基酸甲酯的不对称氢化反应,在1%mol催化剂量和0.12MPaH2下,产物的对映选择性最高达到90.6%e.e.     

HETEROAROMATIC POLYMERS—HIGH TEMPERATURE POLYPYRROLONES DERIVED FROM 2,6-BIS(3'''',4''''-DIAMINOPHENYL)-4-BIPHENYLPYRIDINE AND VARIOUS AROMATIC DIANHYDRIDES

A new type of aromatic tetraamine containing biphenyl moiety in the side chain was synthesized via a modified Chichibabin's reaction.3-Nitro-4-acetamidoacetophenone was reacted with 4-phenyl benzaldehyde in the presence of ammonium acetate to obtain 2,6-bis(3',4'-diaminophenyl)-4-biphenyl pyridine(DPPA).A series of polypyrrolones(PPys) were prepared using tetraamine and various aromatic dianhydrides via a two-step cyclization procedure.All the PPys show excellent high temperature stabilities with the initial decomposition temperatures of 530-549℃ and residual weight ratio of 49%-80% at 750℃ in nitrogen.The polymers exhibit no apparent glass transition temperatures(T_gs)except PPy-1 (T_g=327℃),which is derived from tetraamine DPPA and 2,2-bis[4-(3',4'-dicarboxyphenoxy)-phenyl]propane dianhydride (BPADA).In addition,the polymers have acceptable mechanical properties with the tensile strength of 65-94 MPa.The PPy films show excellent hydrolysis-resistance in alkaline aqueous medium and could maintain most of the properties even after boiling in 10% aqueous sodium hydroxide solution for a week.