4-单取代-1,2,3-三氮唑的合成进展(Ⅱ)—通过去取代基反应

1,2,3-三氮唑衍生物是近些年研究热点化合物之一,随着4-单取代型衍生物在医药、农药、材料等领域的广泛应用,该类化合物的合成及应用近些年引起了广大研究者的关注并获得了可喜进展。本文阐述了4-单取代-1,2,3-三氮唑衍生物的合成发展历史,着重综述了近十年来该类唑衍生物的合成发展情况。内容主要涵盖二取代-1,2,3-三氮唑的去取代基反应,包括脱羧、脱苄基、脱羟(酰氧)基及脱取代乙基等反应。文章还包括一些合成方法及其产物的应用,并对一些重要的反应机理做了分析。文章最后对该类化合物的合成做了总结并展望了未来发展方向。     

液相色谱-串联质谱法测定饲料中的游离棉酚

建立了高效液相色谱-串联质谱法(LC-MS/MS)定量测定饲料中棉酚残留的分析方法。待测物经丙酮-水(7∶3)混合溶液振荡提取,C18色谱柱(100 mm×2.1 mm,3.5μm)分离,以乙腈和0.1%甲酸为流动相进行梯度洗脱,串联质谱测定,外标法定量。方法的定量下限(S/N10)为1 mg/kg;棉酚在10~100μg/L质量浓度范围内,线性相关系数为0.993。以1、20、40 mg/kg浓度进行加标后测得平均回收率为83.8%~97.5%,相对标准偏差为1.3%~5.2%。该方法操作简单、回收率稳定,可用于饲料中棉酚残留的快速确证及定量分析。     

茶叶中乙酰甲胺磷及甲胺磷对映体的气相色谱法分离与测定

建立了乙酰甲胺磷、甲胺磷对映体在茶叶基质中的手性拆分与定量方法。比较了2种手性柱对乙酰甲胺磷及甲胺磷对映体的分离效果,并对分离效果较优的BGB-176手性柱进行色谱条件优化。茶叶样品经改良QuEChERS法处理后,气相色谱测定,外标法定量。在0.04,0.08,0.4 mg/kg 3个加标水平下,甲胺磷、乙酰甲胺磷的回收率分别为58.3%~66.4%和50.8%~57.6%,相对标准偏差(n=5)均小于7%。方法检出限为0.003~0.01 mg/kg。该方法简便、可靠,满足分析要求。通过实际样品的检测,发现乙酰甲胺磷、甲胺磷对映体在茶树上存在一定的降解差异。     

液相色谱-串联质谱法测定人参中申嗪霉素的残留

建立了液相色谱-电喷雾串联质谱测定人参中申嗪霉素残留量的分析方法。人参样品经水浸泡,乙腈提取,分散固相萃取净化,色谱分离后,采用ESI-MS/MS在正离子多反应监测(MRM)模式下进行检测,选择定量离子对为m/z 225.1/179.1,定性离子对为m/z 225.1/125.1,外标法定量。该方法对于人参中申嗪霉素的定量下限为0.01 mg/kg,在0.5~10μg/L质量浓度范围内,峰面积与含量呈良好线性关系,相关系数大于0.99。对人参中申嗪霉素在0.01,0.02,0.10 mg/kg加标水平下的回收率为82%~100%,相对标准偏差均不大于6.8%。结果表明,该方法操作简单、快速,灵敏度和准确度高,可满足人参中申嗪霉素残留量的检测要求。     

新型Co（Ⅲ）配合物（CoL3）的合成及其晶体结构

以3,5-二溴水杨醛缩甲胺希夫碱(HL)为定向配体,硝酸钴为金属离子源,采用溶剂热法在乙腈中合成了一个新型的单核钴(Ⅲ)配合物(Co L3,1),其结构经IR和X-射线单晶衍射表征。1属单斜晶系,空间群P21/n,晶胞参数a=13.833 2(4),b=20.558 2(8),c=20.691 7(7),β=100.622(3)°,V=5 783.6(3)3,Z=8,Dc=2.147 g·cm-3,R1=0.045,wR2=0.092,S=1.02。1中Co(Ⅲ)分别与三个二齿配体上的三个O原子和三个N原子配位,形成轻度扭曲的八面体构型。分子间通过C-H┈Br和Br┈Br弱作用相互连接成三维网络结构。     

电喷雾质谱脱溶剂过程的改进和应用

电喷雾电离(ESI)技术由于脱溶剂过程中产生的电解作用及溶剂蒸发作用,使得酸性溶液喷雾液滴中质子残留,pH值降低,导致蛋白质在液滴中的空间构象受到破坏,所得质谱图无法正确反映蛋白质在溶剂中的真实构象。本研究以两种经典蛋白质(细胞色素C和肌红蛋白)为实验样本,通过在ESI源和质谱仪进样端中间加入自行设计的空气放大器,产生高流速大流量气流,改善ESI脱溶剂过程。结果表明,电喷雾电离的初始液滴在高流速大流量气流引发的激烈碰撞中,被切割为粒径极小的喷雾液滴,同时液滴所带电荷被均分,从而使液滴pH值保持稳定,避免因ESI脱溶剂作用而破坏蛋白质的空间构象。基于高流速大流量气流在ESI脱溶剂过程的新机理,在使用商业化的ESI源时,着重于鞘气等脱溶剂辅助气体的使用和调节。通过增大鞘气的气流量保持蛋白质的生物构象。     

哈茨木霉CGMCC 2979生物转化栀子中的京尼平苷制备京尼平

采用微生物直接转化药材的方法,将栀子中的京尼平苷转化为京尼平,无需糖苷酶和京尼平苷的制备. 在培养温度为30 ℃,pH 6.1以及栀子载量为80 g/L的条件下,48 h京尼平苷的转化率为97.8%. 转化后的京尼平通过XAD-16N大孔树脂偶联硅胶层析的方法,制备得到纯度大于95%的京尼平,收率为62.3%. 在催化、转化机制研究中,从哈茨木霉CGMCC2979的发酵液中分离得到了分子量为74.4 kDa的京尼平苷β-葡萄糖苷酶,该酶最优催化条件为50 ℃和pH 4.0-5.0. K_m和V_max分别为3.6 mmol/L和775 μmol/h/mg蛋白. 本文提供了一种简便、高效制备京尼平的新方法.     

超临界二氧化碳偶合超声预处理强化玉米秸秆酶水解(英)

提出了一个木质纤维素生物质预处理的全绿色加工过程.以玉米秸秆和玉米芯为原料,以超临界CO₂和超声偶合法对木质纤维素进行预处理.超临界CO₂预处理条件为:压力15-25 MPa,温度120₁70℃,含水量50%,反应时间0.5₄ h.超声场功率600W,温度80℃,作用时间2-8 h.用纤维素酶水解反应获得的还原糖总量来评价预处理效果.结果表明,单纯超临界CO₂和超临界CO₂偶合超声预处理都能够提高生物质水解反应还原糖产量.对于玉米芯,超临界CO₂预处理（170℃,20 MPa,3 0min）后,还原糖产率为62%（未预处理的为12%）.对于玉米秸秆（170℃,20 MPa,2.5 h）,还原糖产率为46.4%.对于玉米芯,超临界CO₂偶合超声预处理（600 W,80℃下超声处理6 h,然后用170℃,20 MPa超临界CO₂预处理30 min）后,还原糖产率为87%.对于玉米秸秆,超临界CO₂偶合超声预处理（600 W,80℃下超声处理8 h,然后用170℃,20 MPa超临界CO₂预处理1 h）后,还原糖产率为25.5%.与未处理生物质相比,X射线衍射结果表明玉米秸秆和玉米芯在超临界CO₂和超声预处理后其结晶度没有明显变化.扫描电镜分析则发现木质纤维素的表面积显著增加.     

Validation of a Reference Gene (BdFIM) for Quantifying Transgene Copy Numbers in Brachypodium distachyon by Real-Time PCR

Brachypodium distachyon has been proposed as a new model system for gramineous plants with a sequenced genome and an efficient transformation system. Many transgenic B. distachyon plants have been generated in recent years. To develop a reliable fast method for detecting transgenic B. distachyon and quantifying its transgene copy numbers, a species-specific reference gene is of great priority to be validated both in qualitative PCR and quantitative real-time PCR detection. In this study, we first proved that the BdFIM (B. distachyon fimbrin-like protein) gene is a suitable reference gene in qualitative PCR and quantitative real-time PCR for B. distachyon. Fourteen different B. distachyon varieties were tested by both qualitative and quantitative PCRs, and identical amplification products of BdFIM were obtained with all of them, while no amplification products were observed with samples from 14 other plant species, suggesting that BdFIM gene was specific to B. distachyon. The results of Southern blot analysis revealed that the BdFIM gene was low copy number in seven tested B. distachyon varieties. In conclusion, the BdFIM gene can be used as a reference gene, since it had species specificity, low heterogeneity, and low copy number among the tested B. distachyon varieties. Furthermore, the copy number of inserted sequences from transgenic B. distachyon obtained by real-time PCR methods and Southern blot confirmed that the BdFIM gene was an applicable reference gene in B. distachyon.     

Conductometric and fluorescence probe investigations of molecular interactions between dodecyltrimethylammonium bromide and dipeptides

The effect of five dipeptides (glycylglycine, glycyl-l-valine, glycyl-l-leucine, glycyl-l-glutamine, and l-alanyl-l-glutamine) on the micellar properties of catonic surfactant dodecyltrimethylammonium bromide (DTAB) has been investigated by electrical conductivity and fluorescence spectroscopy. From the conductivity data, the critical micellar concentration (c _cmc), counterion binding constant (β), and thermodynamic parameters of micellization (ΔG _m ^o , ΔH _m ^o and ΔS _m ^o ) have been calculated. The effect of dipeptides on the micellar properties of DTAB depends upon their nature and concentration as well as on temperature and has been used to study the interactions present in the micellar systems. Enthalpy–entropy compensation effect has also been observed. The pyrene fluorescence spectra were used as an index for the estimation of micropolarity of micellar produced by the interaction of DTAB with dipeptides and the aggregation behavior of DTAB. Comparison on the interactions between different types of surfactants and dipeptide showed that the order of the strength for these interactions is TX-100?相似文献