MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.     

CLIFFORD MARTINGALES Φ-EQUIVALENCE BETWEEN S（f） AND f^＊

ＣＬＩＦＦＯＲＤＭＡＲＴＩＮＧＡＬＥＳΦ－ＥＱＵＩＶＡＬＥＮＣＥＢＥＴＷＥＥＮＳ（ｆ）ＡＮＤｆ￥ＬＯＮＧＲＵＬＩＮ；ＱＩＡＮＴＡＯ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ１０００８０，Ｃｈｉｎａ．）...     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

Two New Diterpene Acetylxylosides from Aster veitchianus

Two new acetylxylosides,ent-manool-13-O-β-D-2′-acetylxylopyranoside(1)and entmanool-13-O-β-D-2′,4′-diacetylxylopyranoside(2)were isolated from Aster veitchianus.Their structures were elucidated by spectroscopic methods.     

Two New Ionone Derivatives from Rhododendron przewalskii Maxim

Two new ionone derivatives,named rhododendrone and rhododendronside,were isolated from the alcohoilc extract of the aerial parts of Rhododendron przwalskii Maxim.Their structures were elucidated on the basis of spectroscopic analysis.     

17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

Natural convections in conjugated single and double enclosures

The natural convection in single and double conjugated enclosures are numerically investigated. The single and double enclosures are formed by low conductance walls with finite thickness. The outside vertical surfaces of the conducting walls are of the third kind of boundary condition while the top and bottom outside surfaces are adiabatic. The problem studied is characterized by a dominant horizontal temperature gradient and the thermal boundary conditions at the cavity surfaces can not be specified in priori. Numerical results reveal the characteristics in such kind of enclosures and show the importance of the thermal boundary conditions on the natural convection in enclosures. It is also found that the natural convections in the conjugated double enclosures are basically the same, with a major difference in their fluid temperature levels.