PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Synthesis and Crystal Structure of 1-[(1''-Phenyl-5''-methyl-4''-pyrazolcarbonyl)- 3-methylthio-5-amino-1H-yl-1,2,4-triazole

The crystal structure of 1-[(1'-phenyl-5'-methyl-4'-pyrazolcarbonyl)]-3-methyl thio-5-amino-1H-yl-1,2,4-triazole (C14H14N6OS, Mr = 314.37) has been determined by single-crystal X-ray diffraction analysis. The crystal belongs to triclinic, space group P with a = 8.026(3), b = 8.651(4), c = 11.369(5) (A), α = 89.917(7), β= 89.084(7), γ = 68.470(6)°, V = 734.2(5) (A)3, Z = 2, Dc = 1.422 g/cm3, ( = 0.232 mm-1, F(000) = 328, R = 0.0376 and wR = 0.0890 for 2950 unique reflections. The crystal structure shows the presence of a dimmer with intermolecular N(4)-H(4)…N(3A) hydrogen bonds.     

新的手性配体促进的二芳基二酸和联萘酚的不对称合成

由手性配体α-D-葡萄糖衍生物5，6，7以及薄荷醇（8）和葑醇（9），经 Ulmann偶联反应得到光学活性的（R）－和（S）－6，6′－二硝基联苯－2，2′－ 二甲酸（4a),(R)-6,6′-二甲基联苯－2，2′-二甲酸（4b),(R)-1,1′－联萘－2 ，2′－二甲酸（13）。以三个手性膦酰胺16，17，18和CuCl组成的手性络合物为 催化剂，通过2－萘酚直接氧化偶联得到（S）－2，2′－联萘酚（15）。产物4， 13，15具有中等ee值的光学活性。     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

超高效液相色谱-串联质谱法快速同时测定生姜中10种营养成分

建立了超高效液相色谱-串联质谱（UHPLC-MS/MS）快速同时测定生姜中姜辣素类和姜黄素类营养成分的分析方法，具体包括6-姜酚、8-姜酚、10-姜酚、6-姜烯酚、8-姜烯酚、10-姜烯酚、四氢姜黄素、姜黄素、去甲氧基姜黄素、双去甲氧基姜黄素10种目标物。采用ZORBAX RRHD Eclipse Plus C18色谱柱（100 mm×2.1 mm，1.8 μm）分离，以0.1%（v/v）甲酸水溶液和0.1%（v/v）甲酸甲醇溶液为流动相进行梯度洗脱，采用电喷雾电离（ESI）源、正离子和多反应监测（MRM）模式对目标物进行定性确证和定量分析。10种营养成分的线性相关系数（r）均≥ 0.9995，方法的定量限为0.10~7.71 μg/L，样品基质在3个水平下的平均加标回收率为82.8%~115.3%，相对标准偏差（RSD）为0.58%~11.49%。分析结果显示，生姜中10种营养成分均有检出，其中6-姜酚的含量最高且集中分布于373.35~702.48 mg/kg。该法简便快速，准确可靠，适用于生姜中姜辣素类和姜黄素类营养成分的分析，可为生姜质量鉴定和控制提供技术手段。     

锆氧杂环络合物合成方法探索

邻甲氧基苯基锂和 6,6-二甲基富烯 (或 6,6-二乙基富烯 )反应得配体锂盐 ( Cp′ Li) ,Cp′ Li直接和 Cp Zr Cl3· DME反应生成 2个新的锆络合物 Cp′ Cp Zr Cl2 。 BBr3和 Li Br分别用来使 Cp′ Cp Zr Cl2 环化 ,发现在相同条件下 BBr3比 Li Br3更有效。Cp′ Cp Zr Cl2 通过和 BBr3反应得到 2个新的锆氧杂环络合物。 4个新的锆络合物经元素分析、1 H NMR和 MS确证     

Darstellung und Kristallstruktur von Na2Mn3O7

Synthesis and Crystal-Structure of Na₂Mn₃O₇ Single crystals of Na₂Mn₃O₇ have been grown hydrothermally applying high oxygen pressure (p = 2 kbar). The new compound cystallizes triclinic; space group P1 ; a = 6.636(6) Å, b = 6.854(6) Å, c = 7.548(6) Å, α = 105.76(6)°, β = 106.86(6)°, γ = 111.60(6)°; Z = 2. The crystal structure has been solved and refined to R = 7.9% and R_w = 6.2% (diffractometer data, 1044 independent reflexions). The crystal structure consists of Mn₃O₇^2? anions with manganese coordinated octahedrally by oxygen. These layered anions are hold together by Na⁺ ions (coordination numbers 5 and 6).     

纳米CeO2的形貌控制与表征

以Ce(NO3)3·6H2O和(NH4)2CO3为沉淀源,利用柠檬酸作为络合剂和分散剂,实现了对CeO2前驱体的形貌和尺寸控制,并采用TEM,TGA和XRD等方法对前驱体及其热分解所得纳米CeO2的形貌及结晶性等进行了表征.结果表明,随着柠檬酸加入量的提高,前驱体形貌从纳米线向类球形颗粒变化,焙烧生成的纳米CeO2颗粒的形貌具有明显继承性,所得CeO2属于立方萤石结构,且随焙烧温度的提高,晶化程度增大.     

黄原胶以三价铬交联的水凝胶的脱水行为

对黄原胶／三价铬水凝胶在７０，８０和９０℃下的脱水行为进行了研究．脱水与凝胶的交联密度即参与交联反应的三价铬的含量有密切联系．突发脱水之后的过程可以用一级反应动力学描述，反应速度常数随三价铬的浓度和温度的增高而增大，活化能为３４．５ｋｃａｌ／ｍｏｌ．一价盐（ＮａＣｌ）的含量对脱水过程没有影响．