Effects of initial crystal size of diamond powder on surface residual stress and morphology in polycrystalline diamond (PCD) layer

Polycrystalline diamond compacts (PDC) were synthesized using diamond powder of average crystal size 3-20 μm by the Ni 70 Mn 25 Co 5 alloy infiltration technique at high temperature and high pressure (HPHT).The surface residual stress of polycrystalline diamond (PCD) layer was measured using micro-Raman spectroscopy with hydrostatic stress model and X-ray diffraction (XRD).Measurements of the stress levels of PCDs show that the residual compressive stresses range from 0.12 to 0.22 GPa,which increase with th...     

光子四维量子态隐形传输

多维量子纠缠态比二维纠缠态可加载更多的信息,多维量子系统是量子信息处理中一个很重要的资源,本文采用已实现的光子四维纠缠态,给出了光子四维量子态的张量表达式,并描述了四维量子态隐形传输的一般表示方法；通过讨论光子四维量子态系统的量子通道参数矩阵和测量矩阵的特性,得到实现完全传输和非零概率传输的充要备件,最后,本文给出在多种量子通道下的四维态的量子隐形传态方案,这一过程在张量分析表示下十分清晰明了.     

考查变量控制能力的科学探究题的命题与思考*

以一道科学探究题的命题为例,从题目的研发、学生问题反馈、教学策略改进等角度研究科学探究问题,寻找学生困惑的根源,找到对应教学改进策略,帮助学生提升科学探究能力。     

内圆外矩同轴线内TEM波的场结构及其特性阻抗

利用数值保角变换,研究内圆外矩同轴传输线内TEM波的场结构,利用软件MATLAB、HFSS绘制其场结构图,并给出特性阻抗的计算公式.研究结论对于计算该传输线的衰减常数、了解其功率容量、考虑功率耦合及设计有关的有源器件具有一定的参考价值.     

聚乙烯吡咯烷酮纳米银荧光增强测定番茄红素

合成了聚乙烯吡咯烷酮纳米银,研究了番茄红素对聚乙烯吡咯烷酮纳米银体系的荧光增强效应。考察了缓冲体系、纳米银用量、聚乙二醇浓度、反应时间和温度等因素的影响,建立了测定番茄红素的新方法。在最佳条件下,体系的相对荧光强度与番茄红素浓度呈良好的线性关系,其线性范围为2.0×10-6~8.0×10-5 mol/L,检出限为1.6×10-8 mol/L。方法应用于实际样品检测,回收率为98.29%~109.36%。     

Predicting Polymorphism of Electrospun Polyvinylidene Fluoride Membranes by Their Morphologies

Although electrospinning of polyvinylidene fluoride (PVDF) has been studied for more than 10 years, the crystalline phase differentiation of the electrospun mats is still normally through the combination of different characterization techniques, and the relationship between polymorphism and morphology of the fibers in electrospun PVDF membranes has never been reported. Here, we show their close relationships by conducting room-temperature electrospinning experiments on various polymer/solvent systems. The electrospun membranes full of bead-free fibers have a very high fraction of β-phase, F(β), over 90%, and high orientation, whereas the membranes comprising beads and/or a large number of beaded fibers most often result in a low fraction of β-phase (F(β) normally below 50%) and low orientation. On the other hand, electrospun membranes consisting of both bead-free fibers and a very limited number of beaded fibers showed a medium high fraction of β-phase, F(β) more than 70% but less than 90%. These findings suggest the feasibility of intuitively predicting the crystalline phase of electrospun PVDF membranes directly by their morphologies, which is obviously simple, inexpensive and convenient for future investigations.     

Recent Advances of AIE-Active Conjugated Polymers: Synthesis and Application

Conjugated polymers (CPs) have long been recognized as an important class of materials. The highly conjugated backbone of the CPs will facilitate the rapid exciton migration and result in amplification of fluorescence signals. However, CPs are likely to aggregate and form excimers in solid states, directly leading to the fluorescence quenching, namely aggregation-caused quenching (ACQ), hence inhibiting their prospective utilizations in a large degree. Since the effect of aggregation-induced emission (AIE) is opposite to that of notorious ACQ, the AIE has raised great attention from scientists. CPs with AIE or aggregation-enhanced emission (AEE) features may help to solve the ACQ problem and meanwhile impart polymers with new properties and practical applications. In this review, we summarize the recent progress on the preparation of CPs with AIE or AEE characteristics, where AIE-active luminogens are located at polymer backbones or pendants. Their potential applications including fluorescent sensors, biological probes, and active layers for the fabrication of light-emitting diodes are also described.     

高分子模板调控不同形貌氧化亚铜的仿生合成

采用聚丙烯酰胺(PAM)为软模板,在CuSO4、Na2SO3体系中调控合成了片状、海胆状、一维线、针状聚集体氧化亚铜晶体。研究了不同浓度Cu2+、不同PAM含量及不同温度对晶体生长的影响。结果表明,PAM促使氧化亚铜异相成核,氧化亚铜形貌随PAM质量分数的变化而变化:当c(Cu2+)=0.5mol.L-1时,PAM质量分数为3.0%(常温引入体系),产物主要为片状晶体;PAM质量分数为1.0%、3.0%时(高温引入体系),分别获得一维线状、海胆状晶体;当Cu2+浓度为0.1 mol.L-1时,体系中高温引入质量分数3.0%的PAM,得到片层状晶体;当Cu2+浓度为0.3、0.4 mol.L-1时,得到针状聚集体氧化亚铜晶体。分别用X射线粉末衍射、冷场发射扫描电子显微镜和激光粒度仪对所制备的产品进行了表征。     

炔桥联不对称苯基取代双二茂铁衍生物的设计合成和电化学性质

以四苯基环戊二烯酮为起始原料,经过八步连续反应,成功地合成了3个炔桥联不对称五苯基取代双二茂铁衍生物Fc''-C≡C-Fc（1）、Fc''-C≡C-C≡C-Fc（2）和Fc''-C≡C-C≡C-Fc''（3）（Fc''=五苯基二茂铁基,Fc=二茂铁基）。在设计合成双二茂铁衍生物的过程中,首先经过4步反应,制备出已知化合物Fc''-H（4）,再连续进行3步反应,分别得到3个中间化合物Fc''-COCH₃（5）,Fc''-CCl=CHCHO（6）和Fc''-C≡CH（7）,最后利用偶联反应,得到目标化合物1~3。利用X射线单晶衍射和循环伏安法,测定了化合物1、2和5、7的晶体结构,研究了化合物1~7的电化学性质。研究结果表明,分子的C-H…π键相互作用和空间位阻是导致化合物1和2分子中Fc''和Fc基空间排布取向不同的主要原因。当二茂铁的一个环戊二烯环上引入5个苯取代基时,铁中心的氧化还原电位将升高（E_p^a（Fc''-H）=0.658 V,E_p^a（Fc-H）=0.511 V）。与已知化合物Fc-C≡C-Fc（ΔE=0.215 V）和Fc-C≡C-C≡C-Fc（ΔE=0.134 V）相比,化合物1~3的氧化电位差值（ΔE）均有不同程度地提高（ΔE₁=0.236 V;ΔE₂=0.170 V;ΔE₃=0.146 V）。将1与Fc-C≡C-Fc,2与Fc-C≡C-C≡C-Fc和3进行比较发现,当炔桥两端连接不同的基团Fc''和Fc时,其氧化电位差值（ΔE）将明显提高。     

氧桥桥连四核M4[2×2]格子状结构锌(Ⅱ)配合物的自组装、晶体结构及荧光性质

以席夫碱碳腙类配体H₂L自组装合成了一个新的M₄[2×2]四方格子状结构锌(Ⅱ)配合物[Zn₄(HL)₄](ClO₄)₄·2MeCN·2MeOH(H₂L=1,5-bis(1-(pyridine-2-yl)ethylidene)carbonhydrazide),并对其进行了元素分析、红外光谱、紫外可见光谱和X-射线单晶衍射法表征。单晶结构分析结果表明配合物中,Zn(Ⅱ)离子具有N₄O₂型扭曲的八面体配位构型,4个配体分别失去1个质子后以醇式与金属离子配位,由4个酚氧原子桥连4个Zn(Ⅱ)离子形成[2×2]格子状结构四核配合物。固态荧光测试表明配合物在530 nm附近有强的荧光发射峰。