微乳液法合成LiFePO4 / C正极材料及其电化学性能

本文采用微乳液方法合成了纳米LiFePO₄ / C正极材料。制备样品分别用XRD和SEM进行表征，充放电测试其电化学性能。600 ℃制备样品为单一物相，平均粒径90 nm，在室温2.0～4.0 V (vs Li) 放电电压范围和15 mA·g^-1放电速率下，首次放电容量达到159 mAh·g^-1。制备样品同样展现良好的循环性能。在15 mA·g^-1速率下40次循环后，制备样品放电容量仍保持首次放电容量的98.9%。优异的电化学性能得益于样品颗粒的纳米尺寸、均匀分布以及表面碳层包覆提高了活性材料的电子电导率。     

2-取代-3-芳基-4-噻唑啉(硫)酮衍生物的合成、晶体结构和生物活性

从2-取代-3-芳基-4-噻唑啉酮(4a～4e和5)合成了三个系列新型噻唑啉酮衍生物, 即5-芳基亚甲基-4-噻唑啉酮(6a～6j), 4-噻唑硫酮(7a～7e和8)和4-氰基亚胺基噻唑烷(11a～11e和12). 中间体4a～4e和5由醛、胺和巯基乙酸缩合得到. 所有化合物的结构均经元素分析和¹H NMR确证, 并且采用X射线单晶衍射分析方法测定了化合物4b的结构. 初步生物活性试验结果表明, 部分标题化合物具有一定的杀菌活性和促进黄瓜子叶生根活性.     

Crystal engineering of a versatile building block toward the design of novel inorganic-organic coordination architectures

Six novel inorganic-organic coordination supramolecular networks based on a versatile linking unit 4-pyridylthioacetate (pyta) and inorganic Co(II), Cu(II), Ag(I), Zn(II), Mn(II) and Pb(II) salts have been prepared in water medium and structurally characterized by single-crystal X-ray diffraction analysis. Reaction of CoCl(2).6H(2)O with Hpyta afforded a neutral mononuclear complex [Co(pyta)(2)(H(2)O)(4)](1), which exhibits a two-dimensional (2-D) layered architecture through intermolecular O-HO interactions. Reaction of CuCl(2.2H(2)O with Hpyta yielded a neutral one-dimensional (1-D) coordination polymer [[Cu(pyta)(2)(H(2)O].0.5H(2)O](n)(2) consisting of rectangle molecular square units, which show a three-dimensional (3-D) supramolecular network through S...S and O-H...O weak interactions. However, when AgNO(3), Zn(OAc)(2).2H(2)O or MnCl(2).4H(2)O salts were used in the above self-assembled processes, the neutral 2-D coordination polymers [Ag(pyta)](n)(3), [[Zn(pyta)(2)].4H(2)O](n)(4) or [[Mn(pyta)(2)(H(2)O)]](n)(5) with different topologies were obtained, respectively. While substituting the transition metal ions used in 1-5 with Pb(OAc)(2).3H(2)O, a one-dimensional coordination polymer [Pb(pyta)(2)](n)(6), which shows a novel 2-fold interpenetrating 2-D supramolecular architecture through weak SS interactions, was isolated. It is interesting to note that the building block pyta anion exhibits different configurations and coordination modes in the solid structures of complexes 1-6. These results indicate that the versatile nature of this flexible ligand, together with the coordination preferences of the metal centers, play a critical role in construction of these novel coordination polymers or supramolecules. The spectral and thermal properties of these new materials have also been investigated.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

单核铁(Ⅲ)双卟啉配合物在溶液中的构象平衡及其对环己烷羟化反应的催化活性的影响

合成及表征了一系列以柔韧碳氢链相连不同长度的ｐ／ｐ型单核铁（Ⅲ）双卟啉配合物，以可见光谱首次观察到该系列配合物在氯仿溶液中开放式及闭合式构象的平衡，发现６８０ｎｍ处吸收峰强度与这种构象平衡有关，烷氧链越长，该吸收峰强度越大．利用该类配合物模拟了细胞色素Ｐ４５０单加氧酶对环己烷的羟化作用，催化结果表明，在以分子氧为氧源及还原剂存在的温和条件下，该类配合物的催化活性显著高于单核铁卟啉（ＦｅＴＰＰＣｌ），随着柔韧碳氢链长度的增加，双卟啉的催化活性依次增加．高的催化活性与双卟啉配合物在溶液中的构象平衡，即闭合式构象引起的立体位阻及电子转移有关．     

金属络合物的相转移催化分析与分离

以可简单分离回收、可反复使用为目标，详细介绍了相转移催化的变化发展过 程．通过对溶剂的选择，使得催化剂选择性地溶解在某一液相中，而使产物溶解在 另一液相中，如水-有机两相催化体系；通过温度的变化，简单地实现了在较高温 度下反应为均相体系以提高催化剂的活性，而在较低温度下实现了催化剂与产物不 相溶使得催化剂得以简单分离，如温控型水-有机两相催化体系、氟-有机两相催化 体系、温控型含氟催化剂、温控型有机金属催化剂等．     

肝素化聚甲基硅氧烷-聚氧乙烯接枝物的合成及其体外抗凝血性能评价

以二甲基硅油接枝端羟基聚氧乙烯（ＰＤＭＳ ｇ ＰＥＯ ＯＨ）为基材，用二环己基碳二亚胺（ＤＣＣＩ）作脱剂，研究了羟基（ＯＨ）与肝素上的羧基（—ＣＯＯＨ）之间的脱水缩合反应，制备出肝素化的抗血栓材料ＰＤＭＳ ｇ ＰＥＯ Ｈｅｐ，并对其涂覆表面的肝素含量和体外抗凝血性能进行了初步评价．实验结果表明，肝素接枝的共聚物具有优良的抗凝血性能和一定的应用前景．     

层状MAgTeS3 (M＝K, Rb)的溶剂热合成与表征

以硫醇为螯合剂, 在溶剂热条件下合成了两种层状硫代亚碲酸盐KAgTeS₃ (1)和RbAgTeS₃ (2). X射线单晶解析表明, 1和2是类质同晶化合物. 在晶体结构中, 银硫四面体通过共用顶点形成无限的平行链, 在相邻链中银硫四面体取向相反, 这些链与链由三角锥配位的碲互相连接形成阴离子层状结构, 阳离子在阴离子层间. 1的结晶学数据为: M_r＝370.75, P2₁/c, a＝0.73639(6) nm, b＝1.06468(8) nm, c＝0.85203(6) nm, β＝106.4640(10)°, V＝0.64062(8) nm³, Z＝4, R(F)＝4.44%, wR(F²)＝11.66%. 2的结晶学数据: M_r＝417.12, P2₁/c, a＝0.75531(12) nm, b＝1.07076(7) nm, c＝0.8583(2) nm, β＝106.497(6)°, V＝0.66558(19) nm³, Z＝4, R(F)＝6.00%, wR(F²)＝15.43%. DSC及紫外-可见漫反射光谱研究表明, 这两种化合物为半导体, 并具有很好的热稳定性.     

Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.