A regenerable pseudo-reagentless glucose biosensor based on Nafion polymer and l,1''-dimethylferricinium mediator

Glucose oxidase was immobilized onto electrodes by co-deposition from an aqueous solution containing the diluted ion-exchange polymer Nafion. The cationic exchange property of the polymer was used to provide high local concentrations of l,1'-dimethylferricinium (DMFc⁺) mediator in the film by exchange from solution. The mediated electrodes were operated at +200 mV (vs. ), and the Nafion film was shown to reduce interfering current from ascorbate anion. Cyclic voltammetric analysis revealed a fourteen-fold increase in the effective DMFc⁺ activity at the electrode after extraction into the film. The sensitivity to glucose was 52 μA/cm²/mM in a solution containing 0.09 mM DMFc⁺, which is at least three-fold greater than reported for similar electrodes using hydrogen peroxide detection at +650 mV, with a response time of less than 1 min for a 10 μm thick membrane. Oxygen interference was significant, requiring deaeration of the solution before analysis. The electrodes exhibited no significant decrease in sensitivity for more than 50 days on storage in acetate buffer. Electrodes covered with 8000 MWCO dialysis membrane slowed the exchange of DMFc⁺ with the solution such that the Nafion film functioned as a mediator reservoir. This permitted reagentless analysis of glucose, typically capable of twenty assays when measuring concentrations between 0.1 and 1 mM. The sensitivity for glucose was 7.85 μA/cm²/mM, which is 15% of the sensitivity for the electrode without the dialysis membrane. The detection limit was 20 μM, with a linear range extending to about 3 mM, giving a dynamic range of over two orders of magnitude. Thus where some sacrifice of sensitivity and response rate may be made, the dialysis membrane cover enables multiple analyses in a reagentless biosensor scheme.     

Chiral analysis of neurotransmitters using cyclodextrin-modified capillary electrophoresis equipped with microfabricated interdigitated electrodes

We present cyclodextrin-modified capillary electrophoresis equipped with a microfabricated chip consisting of an array of eight interdigitated microband platinum electrodes (IDs) for simultaneous analysis of three chiral models: epinephrine, norepinephrine and isoproterenol. The IDE chip, positioned very close to the capillary outlet, served as an amplification/detection system. Emerging neurotransmitters at the IDE surface were oxidized at +1.1 V by seven electrodes of the array and then detected by the remaining electrode, poised at +0.0 V. There was an amplification effect on the detecting electrode owing to the recycle between the reduced and oxidized forms of the optical isomers at the electrode surface. The detecting "amplification" current response was governed by the applied potential, the detecting electrode position, the number of adjacent electrodes used for recycling and the distance between the oxidative and reductive electrodes. The six chiral forms of the three neurotransmitters were resolved using 25 mM heptakis(2,6,di-o-methyl)-beta-cyclodextrin with a detection limit of approximately 5 microM. The scheme detected a reduced compound at a reducing potential instead of conventional oxidation detection to alleviate electrode fouling and electroactive interferences. The concurrent oxidation/reduction detection of compounds also facilitated and ascertained peak identification as interfering compounds were unlikely to have the same oxidative/reductive characteristics and mobilities as the analytes of interrogation.     

Geminal bis-ureas as gelators for organic solvents: gelation properties and structural studies in solution and in the gel state

Several geminal bis-urea compounds were synthesised by means of an acid-catalysed condensation of various benzaldehydes with different monoalkylureas. Many of these compounds form thermoreversible gels with a number of organic solvents at very low concentrations (<3mM) and which are stable to temperatures higher than 100 degrees C. Electron microscopy revealed a three-dimensional (3D) network of intertwined fibres, which are several tens of micrometers long and have a width ranging from approximately 30 to 300 nm. The possible aggregate forms and aggregate symmetries were evaluated by means of molecular mechanics calculations. 1H NMR, 2D NMR, 13C NMR and 13C-CP/MAS NMR techniques were used to obtain information about the aggregation and possible aggregate symmetry of geminal bis-ureas in solution, in the gel state, and in the solid state.     

Fluorescence properties of gold nanorods and their application for DNA biosensing

This communication reveals new and unique optical properties with respect to enhanced fluorescence of gold nanorods as they elongate; a novel strategy for DNA hybridization studies based on monitoring the fluorescence intensity of gold nanorods has been demonstrated.     

Long-range sigma-pi interactions in tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes). Photo-electron spectroscopy, ab initio SCF MO calculations, and natural bond orbital analyses

Long-range sigma-pi interactions in tetrahydro4H-thiopyran end-capped oligo(cyclohexylidenes) were identified by He(I) photoelectron spectroscopy (PES) and ab initio RHF/6-31G* calculations. The vertical ionization energies Ivj of the highest occupied molecular orbitals (MO's) were assigned using Koopmans' theorem (Iv,j = -epsilonj) and by correlation with the ionizations of related reference compounds. The experimental (PES) and theoretical (RHF/6-31G*) results are in good agreement. For tercyclohexylidene derivatives which contain two nonconjugated pi-bonds splittings deltaIv,j of the pi-bands in the range from approximately 0.5 to 0.7 eV (delta-epsilonj approximately 0.6 to 0.9 eV). For the bi- and tercyclohexylidene compounds containing two sulfur atoms at their alpha- and omega-end positions the pi-type sulfur lone pair bands [Lppi(S)] split significantly by deltaIvj approximately 0.3 to 0.4 eV (delta-epsilonj approximately 0.3 to 0.4 eV), i.e. sigma-pi interactions over distances of ca. 8 and 12 A, respectively, occur. The magnitude of the interactions and the observed splittings are independent of the anti and syn conformations of the oligo(cyclohexylidene) hydrocarbon skeletons. RHF/6-31G* Natural Bond Orbital analyses reveal that the Hax-C-C-Hax precanonical MO's (PCMO's) centered on the cyclohexyl-type rings are paramount for the relay of the through-bond sigma-pi interactions; no through-space sigma-pi interactions were identified.     

Oxidation, deformation, and destruction of carbon nanotubes in aqueous ceric sulfate

A simple wet chemical method involving only ultrasonic processing in dilute ceric sulfate (CS) was used to functionalize carbon nanotubes (CNTs). Unexpectedly, single-walled and multiwalled carbon nanotubes (SWCNTs and MWCNTs) were cut, oxidized, and disintegrated by sonication in 0.1 N CS for 2-5 h. Transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction spectroscopy (XRD), Raman scattering, and photoacoustic Fourier transform infrared spectroscopy (FTIR) were used to probe wall damage during the chemical processing. Cyclic voltammetry and impedance spectroscopy were used to evaluate the conductivity of the CS-treated CNTs. This one-step process resulted in the destruction of SWCNTs to produce nonconducting amorphous carbon. MWCNTs were oxidized and converted to graphitic materials and amorphous carbon with retained conductivity.     

In-line coupling capillary electrochromatography with amperometric detection for analysis of explosive compounds

Amperometric detection at a bare gold electrode has been in-line coupled with capillary electrochromatography (CEC) for analysis of nitroaromatic and nitroamine explosives in contaminated soils and ground water. The CEC column packed with 3 microm C18 particles performed best using a mobile phase containing 70-80% methanol, 30 or 20% water, 5 mM sodium dodecyl sulfate (SDS) and 10mM 2-(N-morpholino)ethanesulfonic acid (MES). In contrast, the separation column packed with 1.5 km C18 particles exhibited the best separation when only 30% methanol was added to a mobile phase containing 70% water, 7 mM SDS, and 10 mM MES. The detection, based on electrochemical reduction of the explosives (-0.7 or -1 V vs. Ag/AgCl, depending upon the level of methanol in the mobile phase), was compatible with such mobile phases. The detection limits for 13 explosives ranged from 100 to 200 ppb, i.e., about twofold better than those obtained with electrokinetic chromatography (EKC)/amperometric detection. From an operational viewpoint, exhaustive column conditioning was a prerequisite and care should be taken to prevent bubble formation and current breakdown during the course of separation. The CEC column equipped with amperometric detection successfully measured explosives in ground water and extracts prepared from contaminated soils and the results obtained agreed well with those of the U.S. Environmental protection Agency (EPA) method.     

Contribution à la phytochimie du genre Gentiana XXI; Les cinnamoyl-C-glucosylflavones et leurs O-glucosides dans Gentiana punctataL.

Phytochemistry of genus Gentiana XXI: The cinnamoyl-C-glucosylflavones and their O-glucosides in Gentiana punctata L . Three new ( 1 – 3 ) and three previously identified ( 4 – 6 ) cinnamoyl-C-glucosyl-flavones have been isolated from the leaves of Gentiana punctata L . The structures of the new compounds were established as: trans-cafeoyl-2″-iso-orientin-4′-O-β-D -glucoside ( 1 ), trans-feruloyl-2″-isovitexin-4′-O-β-D -glucoside ( 2 ) and trans-feruloyl-2″-isovitexin ( 3 ). Isoscoparine ( 8 ) and O-β-D -glucosyl-2″-iso-orientin ( 7 ) were also isolated and identified.     

Determination of copper, iron, manganese and zinc in river and estuarine water by atom trapping-flame atomic absorption spectrometry

Summary A simple method is described for the atomic absorption (AA) determination of Cu, Fe, Mn and Zn in river and estuarine water using two atom trapping techniques: a water-cooled dual silica tube and a commercially available double-slotted quartz tube mounted in an air-acetylene flame. Rapid, accurate analyses can be achieved using continuous aspiration. The concentration detection limits were 0.9, 1.5 and 0.3 ng ml^–1 for Cu, Mn and Zn, respectively, using a 2 min in situ preconcentration time with the dual silica tube atom trap and 4.0, 12.1, 2.0 and 1.2 ng ml^–1 for Cu, Fe, Mn and Zn, respectively, using the double-slotted quartz tube. The relative standard deviations are of the order of 2.9–6.9% for both techniques. The accuracy was assessed by analyses of NRCC SLRS-2 riverine and SLEW-1 estuarine water reference materials. Basic performance characteristics are also given for Ag, Bi, Cd, In, Pb and Tl using the dual silica tube atom trap.