双光子荧光探针研究及其应用

双光子荧光显微成像兼具诸如近红外激发、暗场成像、避免荧光漂白和光致毒、定靶激发、高横向分辨率与纵向分辨率、降低生物组织吸光系数及降低组织自发荧光干扰等特点而显著地优于单光子荧光显微成像,为生命科学研究提供了更为锐利的工具。而用于像离子的含量及其对生理的影响、离子参与的生理活动机制、离子与分子的作用、特定分子的分布及其相互作用等方面研究的双光子荧光探针,是实现成像的关键。双光子荧光探针的研究旨在促进双光子荧光显微镜应用的发展,促进生命科学、医学科学的快速发展,同时也带动双光子荧光探针所隶属的化学这一学科的发展。因此对双光子荧光探针的研究具有重要的理论和实践意义。该文综述了双光子荧光显微成像的优点、双光子荧光探针设计的原理及双光子荧光探针在离子分析方面的应用,并展望了这类荧光探针的发展趋势与应用前景。     

Continuous-Variable Measurement-Device-Independent Quantum Key Distribution with One-Time Shot-Noise Unit Calibration

Imperfections in practical detectors,including limited detection efficiency,and inherent electronic noise,can seriously decrease the transmission distance of continuous-variable measurement-device-independent quantum key distribution systems.Owing to the difficulties inherent in realizing a high-efficiency fiber homodyne detector,challenges still exist in continuous-variable measurement-device-independent quantum key distribution system implementation.We offer an alternative approach in an attempt to solve these difficulties and improve the potential for system implementation.Here,a novel practical detector modeling method is utilized,which is combined with a one-time shot-noise-unit calibration method for the purpose of system realization.The new modeling method benefits greatly from taking advantage of one-time shot-noise-unit calibration methods,such as measuring electronic noise and shot noise directly to a novel shot-noise unit,so as to eliminate the statistical fluctuations found in previous methods;this makes the implementation of such systems simpler,and the calibration progress more accurate.We provide a simulation of the secret key rate versus distance with different parameters.In addition,the minimal detection efficiency required at each distance,as well as the contrast between the two methods,are also shown,so as to provide a reference in terms of system realization.     

Silica-metalloporphyrins hybrid materials: preparation and catalysis to hydroxylate cyclohexane with molecular oxygen

Three types of novel silica-metalloporphyrins hybrid materials, Si-S-APTCPPFe, Si-S-APTCPPMn and Si-S-APTCPPCo, were prepared at room temperature by sol–gel method involving a thiol-ene polymerization reaction of 5-(4-allyloxy)phenyl-10,15,20-tri(4-chlorophenyl)porphyrin (APTCPP) with 3-mercaptopropyltrimethoxysilane (MPS). The hybrid materials were characterized by XRD, SEM, FT–IR, UV–Vis and TG, and were investigated as catalysts for the aerobic oxidation of cyclohexane. It is found that these hybrid materials are more efficient catalysts than the analogous non-supported metalloporphyrins for cyclohexane hydroxylation in metalloporphyrin–O₂–ascrobate system and the metal ion in the porphyrins significantly affected the catalytic efficiencies of these hybrid materials.     

共轭二烯烃定向加成研究进展

以1,3-丁二烯为代表的共轭二烯烃是重要的有机合成原料,在有机合成领域有重要的应用价值.综述了以1,3-丁二烯等为代表的共轭二烯烃定向加成的研究进展,并展望了其发展和应用前景.     

不同的烧结工艺对Sm-Co2∶17型高温磁体性能的影响

采用中频感应熔炼法制备了Sm( Co0.79 Fe0.09 Cuo.085 Zr0.032) 7.95合金,采用传统烧结工艺,在1200 ～1240℃烧结1h,1165 ～1190℃固溶处理3h,快速风冷淬火后在840 ℃保温12h,以0.4 ·min-1的冷速冷却至420℃,保温10h,最后随炉冷却.磁体经过加工后,采用不同的磁性测试手段对磁体进行测试.结果表明,磁体的剩磁随烧结温度的升高而增大,矫顽力最好的工艺为1230℃烧结1h,然后在1180℃固溶3h.将此工艺制备的磁体采用中国计量科学院NIM-500C超高温永磁测量仪测试,磁体在773 K时的最大磁能积为10.94 MGOe,高于已经报道的同Z值的2∶17型永磁体.磁体的磁滞回线通过振动样品磁强计( VSM)测得,室温下Br=10.5 kGs,Hcj=30.21 kOe,(BH)max=25.60MGOe; 773 K时磁体Br=7.45 kGs,Hcj=6.02 kOe,(BH) max=9.85 MGOe.剩磁温度系数α=-0.0624％·℃-1,矫顽力温度系数β=-0.169％·℃-1.     

Experimental Study on Wave Characteristics of Stilling Basin with a Negative Step

Stilling basin with a negative step is an important structure in hydraulic systems, because it can avoid atomization and decrease scouring problems. Although stilling basins with a negative step have attracted much attention from researchers, few researchers have focused on the wave characteristics. In this research, an experimental study on the wave characteristics of stilling basins with a negative step was carried out. The wave height, average period, wave probability density and power spectrum along the flow direction of different stilling basins with a negative step were described based on the wave theory, and the results indicate discharge and step height have a significant effect on the wave characteristics. The relationships between the different characteristic wave heights, and the empirical formula for the relative characteristic wave height are obtained. Finally, the dimensionless standard deviation at the end of the stilling basin with a negative step is linearly related to the flow-energy ratio and the relative step height under B-jump.     

Controllably Growing Topologies in One-shot RAFT Polymerization via Macro-latent Monomer Strategy

The controlled and efficient synthesis of polymers with tailored topologies is challenging but important for exploring structure/property research. Herein, we proposed a concept of macro-latent monomer to achieve the controlled growth of polymer topologies.The macro-latent monomer was installed by a dynamic furan/maleimide covalent bond at the chain terminal. One-shot reversible additionfragmentation chain transfer(RAFT) polymerization of styrene and the macro-latent monomer created controlled growth of polymer topologies.Low temperature such as 40 ℃ could not activate the macro-latent monomer and thus the polymerization created the homo-polystyrene. By contrast, high temperature of ～110 ℃ activated the macro-latent monomer, and a maleimide-terminated macro-monomer was released via the retro-Diels Alder reaction. This macro-monomer immediately joined the cross polymerization with styrene and thus produced the side chains. By delicately manipulating the polymerization temperature, the predetermined placement of the macro-latent monomer-derived polymeric sidechains created controllably growing topologies, including star-, π-shaped, and density-variable grafting copolymers. This work paved a new way for creating on-demand topologies and would greatly enrich the topology synthesis.