Low-cost 3D nanocomposite solar cells obtained by electrodeposition of CuInSe2

Thin CuInSe₂ films have been prepared by electrodeposition from a single bath aqueous solution on both dense and nanoporous TiO₂. The films are deposited potentiostatically using a N₂-purged electrolyte at different potentials. Various deposition times and solution compositions have been employed. The effect of annealing in air and in argon at different temperatures and times is also investigated. Thin films and nanocomposites of TiO₂ and CuInSe₂ have been studied with electron microscopy, X-ray diffraction, Raman spectroscopy, and optical absorption spectroscopy. After a thermal anneal in argon at 350 °C for 30 min excellent CuInSe₂ is obtained. In particular the nominal crystal structure and the bandgap of 1.0 eV are found. Although pinholes are present occasionally, good samples with diode curves showing a rectification ratio of 24 at ±1 V are obtained. Upon irradiation with simulated solar light of 1000 W m⁻² a clear photoconductivity response is observed. Furthermore, also some photovoltaic energy conversion is found in TiO₂|CuInSe₂ nanocomposites.     

Determination of ionization constants of N-imidazole derivatives, aromatase inhibitors, using capillary electrophoresis and influence of substituents on pKa shifts

Capillary electrophoresis (CE) was used as a method to determine the acidity constants of eight aromatase inhibitors. This method was validated by comparison of results obtained with a traditional method, UV spectroscopy, and additionally with computational calculations. We confirmed here, with our series of compounds, that capillary electrophoresis is an attractive method for pKa measurements which is based on migration time or mobilities of the ionic species over a range of pH values. The precision of pKa measurements of N-imidazole derivatives is useful to observe pKa shifts induced by chemical modifications introduced on adjacent aromatic rings such as heterocycle (benzoxa- or benzothiazolinone) or substituted benzyle. The knowledge of these pKa values is a great interest to predict migration of solutes and qualitative interactions with ionized cyclodextrines as chiral selectors in further enantioseparative CE studies.     

A mathematical correction method for spectral interferences on selenium in inductively coupled plasma mass spectrometry

Despite the fact that Se has six isotopes, its determination in biological samples by inductively coupled plasma mass spectrometry is seriously hampered by spectral interferences. The resolution of quadrupole mass analyzers is insufficient to resolve Se(+) from molecular species having the same nominal mass. A mathematical correction method based on signal ratio measurement of (78)Se(+)/(76)Se(+) and (78)Ar(+)(2)/(76)Ar(+)(2) is described. It allows us to correct for the argon dimer interference at m/z 78 and thus to determine Se down to the 1 mug/l level. The method was applied to the determination of Se in human serum. Good agreement with the certified value was obtained.     

Shelling pseudopolyhedra

The notion of shellability originated in the context of polyhedral complexes and combinatorial topology. An abstraction of this concept for graded posets (i.e., graded partially ordered sets) was recently introduced by Björner and Wachs first in the finite case [1] and then with Walker in the infinite case [11]. Many posets arising in combinatorics and in convex geometry were investigated and some proved to be shellable. A key achievement was the proof by Bruggesser and Mani that boundary complexes of convex polytopes are shellable [4].We extend here the result of Bruggesser and Mani to polyhedral complexes arising as boundary complexes of more general convex sets, called pseudopolyhedra, with suitable asymptotic behavior. This includes a previous result on tilings of a Euclidean space ^d which are projections of the boundary of a (d+1)-pseudopolyhedron [7].     

Double‐Gyroid Nanostructure Formation by Aggregation‐Induced Atropisomerization and Co‐Assembly of Ionic Liquid‐Crystalline Amphiphiles

We report a new molecular‐design principle for creating double‐gyroid nanostructured molecular assemblies based on atropisomerization. Ionic amphiphiles containing two imidazolium rings close to each other were designed and synthesized. NMR data revealed that the rotation of the imidazolium rings is restricted, with an activation energy as high as 63 kJ mol^?1 in DMSO‐d₆ solution (DFT prediction for a model compound in the vacuum: 90–100 kJ mol^?1). Due to the restricted rotation, the amphiphiles feature “double” atropisomeric axes in their ionic segments and form three stable atropisomers: meso, R, and S. These isomers co‐organize into ‐type bicontinuous cubic liquid‐crystalline mesophases through nanosegregation of the ionic and non‐ionic parts. Considering the intrinsic characteristic of ‐type bicontinuous cubic structures that they are composed of intertwined right‐ and left‐handed single gyroids, we propose that the simultaneous presence of both R‐ and S‐atropisomers is an important contributor to the formation of double‐gyroid structures.     

The determination of molybdenum in a sea water candidate reference material by inductively coupled plasma-mass spectrometry

In the framework of a certification campaign organized by BCR (Bureau Communautaire de Référence, Commission of the European Communities, Brussels) molybdenum was determined in a sea water candidate reference material (BCR CRM 403) using inductively coupled plasma-mass spectrometry. The determination was hampered by both non-spectral (signal suppression) and spectral interferences. Ten-fold dilution of the sea water and the use of a carefully selected internal standard allowed accurate correction for the signal suppression. Spectral interferences on Mo nuclides could mainly be attributed to BrO(+) and BrOH(+) ions. At the level of spectral overlap encountered, these interferences could be corrected for with sufficient accuracy by matrix matching of the blank for Br or by application of a mathematical correction method involving resolvation of a pair of simultaneous equations. Results obtained after application of anion exchange to separate Br from Mo confirmed the results obtained using the correction methods, proving the validity of the latter. A good agreement is established by comparison of the ICP-MS result with those obtained by other techniques in other laboratories.     

Chiral Resolution of Enantiomers of Homocamptothecin Derivatives, Antitumor Topoisomerase I Inhibitors, Using High Performance Liquid Chromatography on Polysaccharide-Based Chiral Stationary Phases

Analytical HPLC methods using derivatized cellulose and amylose chiral stationary phases were developed for the separation of the enantiomers of homocamptothecin (hCPT) derivatives which constitute a promising series of potent anticancer agents targeting DNA topoisomerase I. The resolutions were performed using a normal phase methodology with two silica-based celluloses tris-3,5-dimethylphenylcarbamate (Chiralcel OD-H) and tris-methylbenzoate (Chiralcel OJ) or two amyloses tris-3,5-dimethylphenylcarbamate (Chiralpak AD) and tris-(S)-1-phenylethylcarbamate (Chiralpak AS). The mobile phase and the chiral stationary phase were varied to achieve the best resolution. Different types and concentration of aliphatic alcohols in the mobile phase were also tested along with the temperature dependence. An optimal baseline separation (Rs > 1.5) was readily obtained in most cases. The different columns gave complementary results in term of resolution. The limits of detection and quantification were between 0.08–0.40 M and 0.24–1.80 M, respectively and the enantiomeric purity was superior to 99.9%.     

Synthesis,Characterization and Properties of (Vinyl Triethoxy Silane-grafted PP)/Silica Nanocomposites

A new route has been developed to produce PP/silica nanocomposites starting from porous PP reactor powder and making use of sol-gel chemistry. Silica-like, nano-sized particles were prepared in the pores of the PP reactor powder with a controlled degree of adhesion between PP and silica. Magic-angle spinning (MAS) ²⁹Si NMR spectra showed that the chemical building blocks of the silica-like clusters are of Q³ and Q⁴-type. For (vinyl triethoxy silane (VTES)-grafted PP)/silica nanocomposites, VTES was grafted via solid-state modification (SSM) in porous PP particles. Subsequently, silica particles were prepared by sol-gel technology in the VTES-grafted PP. MAS ²⁹Si NMR and FT-IR spectroscopy showed that the grafted VTES becomes part of the in-situ formed silica particles. The study on the mechanical properties of (VTES-grafted PP)/silica nanocomposites showed that the silica particles improved the impact toughness of PP by a factor of 2, when there is no chemical interaction between the particles and the matrix, while for (VTES-grafted PP)/silica nanocomposites the impact toughness decreased. This indicates that chemical bonding between the filler particles and the PP-matrix results in brittle failure and supports the hypothesis that debonding is necessary for improving the impact toughness of PP with inorganic fillers.     

On clarification of haze in polypropylene

The mechanism of reducing light scattering in isotactic polypropylene (i‐PP), through the addition of so‐called clarifying agents, is studied with small‐angle light scattering (SALS) and scanning electron microscopy (SEM). The clarifying agents used in this study depict monotectic phase behavior with i‐PP, crystallizing in a relatively narrow concentration range in a nanofibrillar network, providing an ultrahigh nucleation density in the i‐PP melt. It is found that the clarifying effect, a dramatically increased transparency and reduced haze, that occurs within the aforementioned additive concentration range, coincides with a change in morphology from strongly scattering spherulites to shish‐kebab‐like crystalline structures, as evidenced by in situ SALS measurements and confirmed by SEM images. A simple scaling law, relating the diameter of the shish‐kebab structures to the fibril diameter and volume fraction of the clarifying agent is proposed, suggesting that the performance of a (fibril‐forming) clarifying agent will improve by reducing the fibril diameter and/or increasing the volume concentration of the clarifying agent. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 865–874     

Scheduling the Australian Football League

Generating a schedule for a professional sports league is an extremely demanding task. Good schedules have many benefits for the league, such as higher attendance and TV viewership, lower costs and increased fairness. The Australian Football League is particularly interesting because of an unusual competition format integrating a single round-robin tournament with additional games. Furthermore, several teams have multiple home venues and some venues are shared by multiple teams. This paper presents a 3-phase process to schedule the Australian Football League. The resulting solution outperforms the official schedule with respect to minimizing and balancing travel distance and breaks, while satisfying more requirements.