Rapid surface-to-volume ratio and tortuosity measurement using Difftrain

Analysis of diffusion measurements as a function of observation time (Delta), to calculate surface-to-volume ratios (S/V) and tortuosities (kappa), is a useful tool in the characterisation of porous media using NMR. However, using conventional pulsed field gradient (PFG) measurements, this requires long total experiment times (typically hours). Here, we show how the rapid diffusion measurement pulse sequence, Difftrain, can be used to provide the required experimental data much more rapidly (typically within minutes) with a consequential reduction in total experiment time of typically over an order of magnitude. Several novel modifications to the Difftrain pulse sequence are also presented to tailor it to this particular application; these include a variable delay between echoes (to ensure optimal echo position with respect to Delta) and a variable tip angle for the refocusing pulse (to ensure optimal use of available signal). Difftrain is applied to measure both S/V and kappa for a model glass bead pack; excellent agreement is found with both a conventional PFG measurement and with a bulk gravimetric measurement of S/V.     

The ν3 fundamental band of HDCO

The ν₃ fundamental band (CO stretch) of HDCO at 1724 cm^?1 has been studied using both conventional infrared absorption and CO laser Stark spectroscopy. In addition to the excited-state (v₃ = 1) rotational constants, improved constants for the ground state of HDCO have been obtained by combining previous microwave data with some infrared combination differences. The following constants were determined:

     

23.

Identification and Quadrupole-Moment Measurement of a Superdeformed Band in 84Zr     

Jin H  Baktash C  Brinkman MJ  Gross CJ  Sarantites DG  Lee IY  Cederwall B  Cristancho F  Döring J  Durham FE  Hua P  Johns GD  Korolija M  LaFosse DR  Landulfo E  Macchiavelli AO  Rathbun W  Saladin JX  Stracener DW  Tabor SL  Werner TR 《Physical review letters》1995,75(8):1471-1474

     

24.

Quantitative single point imaging with compressed sensing     

P. Parasoglou  D. Malioutov  A.J. Sederman  J. Rasburn  H. Powell  L.F. Gladden  A. Blake  M.L. Johns   《Journal of magnetic resonance (San Diego, Calif. : 1997)》2009,201(1):72-80

A novel approach with respect to single point imaging (SPI), compressed sensing, is presented here that is shown to significantly reduce the loss of accuracy of reconstructed images from under-sampled acquisition data. SPI complements compressed sensing extremely well as it allows unconstrained selection of sampling trajectories. Dynamic processes featuring short NMR signal can thus be more rapidly imaged, in our case the absorption of moisture by a cereal-based wafer material, with minimal loss of image quantification. The absolute moisture content distribution is recovered via a series of images acquired with variable phase encoding times allowing extrapolation to time zero for each image pixel and the effective removal of contrast.     

25.

The far-infrared spectrum of deuterated hydrogen sulfide: The ground state rotational constants of D232S,D234S,HD32S,and HD34S     

C. Camy-Peyret  J.-M. Flaud  L. Lechuga-Fossat  J.W.C. Johns 《Journal of Molecular Spectroscopy》1985,109(2):300-333

Pure rotation spectra of deuterated samples of hydrogen sulfide have been recorded between 25 and 280 cm^?1 with a Fourier transform spectrometer at an apodized resolution of 0.004 cm^?1. Accurate rotational and centrifugal distortion constants have been derived from the observed line positions for the four isotopic species D₂³²S, D₂³⁴S, HD³²S, and HD³⁴S. Finally, an extensive list of calculated and observed line positions, together with their calculated intensities is presented.     

26.

Selective extraction and elution of weak bases by in-line solid-phase extraction capillary electrophoresis using a pH step gradient and a weak cation-exchange monolith     

Thabano JR  Breadmore MC  Hutchinson JP  Johns C  Haddad PR 《The Analyst》2008,133(10):1380-1387

A polymer monolith bearing weak cation-exchange functionality was prepared for the purpose of demonstrating pH-selective extraction and elution in in-line solid-phase extraction-capillary electrophoresis (SPE-CE) utilising a model set of cationic analytes, namely imidazole, lutidine and 3-phenylpropanamine. Optimization of the electrolyte conditions for efficient elution of the adsorbed analytes using a moving pH boundary required that the capillary and monolith be filled with 44 mM sodium acetate at high pH (pH 6) and a low pH electrolyte of 3 mM sodium acetate pH 3 was placed in the electrolyte vials. This combination allowed the adsorbed analytes to be simultaneously eluted and focused into narrow bands, with peak widths of the eluted analytes having a baseline width of 1.2 s immediately after the monolith. Using these optimum elution conditions, the versatility of the SPE-CE approach was demonstrated by removing unwanted adsorbed components after extraction with a wash at a different pH and also by selecting a pH at which only some of the model weak bases were ionised. The analytical performance of the approach was evaluated and the relative standard deviation for peak heights, peak area and migration times were in the ranges of 1.4-5.3, 1.2-3.3 and 0.4-1.2% respectively. Analytes exhibited linear calibrations with r(2) values ranging from 0.996 to 0.999 over two orders of magnitude. Analyte pre-concentration provided excellent sensitivity, and limits of detection for the analyte used in this study were in the range 8.0-30 ng ml(-1), which was an enhancement of 63 when compared to normal hydrodynamic injection occupying 1.3% of the capillary of these bases in water.     

27.

Identification of inorganic ions in post‐blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection     

Joseph P. Hutchinson  Cameron Johns  Michael C. Breadmore  Emily F. Hilder  Rosanne M. Guijt  Chris Lennard  Greg Dicinoski  Paul R. Haddad 《Electrophoresis》2008,29(22):4593-4602

Novel CE methods have been developed on portable instrumentation adapted to accommodate a capacitively coupled contactless conductivity detector for the separation and sensitive detection of inorganic anions and cations in post‐blast explosive residues from homemade inorganic explosive devices. The methods presented combine sensitivity and speed of analysis for the wide range of inorganic ions used in this study. Separate methods were employed for the separation of anions and cations. The anion separation method utilised a low conductivity 70 mM Tris/70 mM CHES aqueous electrolyte (pH 8.6) with a 90 cm capillary coated with hexadimethrine bromide to reverse the EOF. Fifteen anions could be baseline separated in 7 min with detection limits in the range 27–240 μg/L. A selection of ten anions deemed most important in this application could be separated in 45 s on a shorter capillary (30.6 cm) using the same electrolyte. The cation separation method was performed on a 73 cm length of fused‐silica capillary using an electrolyte system composed of 10 mM histidine and 50 mM acetic acid, at pH 4.2. The addition of the complexants, 1 mM hydroxyisobutyric acid and 0.7 mM 18‐crown‐6 ether, enhanced selectivity and allowed the separation of eleven inorganic cations in under 7 min with detection limits in the range 31–240 μg/L. The developed methods were successfully field tested on post‐blast residues obtained from the controlled detonation of homemade explosive devices. Results were verified using ion chromatographic analyses of the same samples.     

28.

Localization of Fatty Acyl and Double Bond Positions in Phosphatidylcholines Using a Dual Stage CID Fragmentation Coupled with Ion Mobility Mass Spectrometry     

Castro-Perez J  Roddy TP  Nibbering NM  Shah V  McLaren DG  Previs S  Attygalle AB  Herath K  Chen Z  Wang SP  Mitnaul L  Hubbard BK  Vreeken RJ  Johns DG  Hankemeier T 《Journal of the American Society for Mass Spectrometry》2011,22(9):1552-1567

A high content molecular fragmentation for the analysis of phosphatidylcholines (PC) was achieved utilizing a two-stage [trap (first generation fragmentation) and transfer (second generation fragmentation)] collision-induced dissociation (CID) in combination with travelling-wave ion mobility spectrometry (TWIMS). The novel aspects of this work reside in the fact that a TWIMS arrangement was used to obtain a high level structural information including location of fatty acyl substituents and double bonds for PCs in plasma, and the presence of alkali metal adduct ions such as [M?+?Li]⁺ was not required to obtain double bond positions. Elemental compositions for fragment ions were confirmed by accurate mass measurements. A very specific first generation fragment ion m/z 577 (M-phosphoryl choline) from the PC [16:0/18:1 (9Z)] was produced, which by further CID generated acylium ions containing either the fatty acyl 16:0 (C₁₅H₃₁CO⁺, m/z 239) or 18:1 (9Z) (C₁₇H₃₃CO⁺, m/z 265) substituent. Subsequent water loss from these acylium ions was key in producing hydrocarbon fragment ions mainly from the α-proximal position of the carbonyl group such as the hydrocarbon ion m/z 67 (+H₂C-HC?=?CH-CH?=?CH₂). Formation of these ions was of important significance for determining double bonds in the fatty acyl chains. In addition to this, and with the aid of ¹³C labeled lyso-phosphatidylcholine (LPC) 18:1 (9Z) in the ω-position (methyl) TAP fragmentation produced the ion at m/z 57. And was proven to be derived from the α-proximal (carboxylate) or distant ω-position (methyl) in the LPC.     

29.

Spontaneous Resolution of Hemorrhagic Polyps of the True Vocal Fold     

Adam M. Klein  Marcus Lehmann  Edie R. Hapner  Michael M. Johns 《Journal of voice》2009,23(1):132-135

     

30.

Differences in Temporal Variables Between Voice Therapy Completers and Dropouts     

Carissa Portone-Maira  Justin C. WiseMichael M. Johns III  Edie R. Hapner 《Journal of voice》2011,25(1):62-66

     

[首页] « 上一页 [1] [2] 3 [4] [5] [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

Constant	Ground state	$\text{v}{}_3\text{= 1}$ state	Units
$\text{ν}{}_0$		1724.267	cm?1
$\text{A}$	198 119.75	198 210.4	MHz
$\text{B}$	34 910.646	34 676.6	MHz
$\text{C}$	29 561.488	29 331.3	MHz
$\text{μ}{}_{\mathrm{a}}$	2.3302	2.3486	D
$\text{μ}{}_{\mathrm{b}}$	0.195	0.190	D

Quantitative single point imaging with compressed sensing

A novel approach with respect to single point imaging (SPI), compressed sensing, is presented here that is shown to significantly reduce the loss of accuracy of reconstructed images from under-sampled acquisition data. SPI complements compressed sensing extremely well as it allows unconstrained selection of sampling trajectories. Dynamic processes featuring short NMR signal can thus be more rapidly imaged, in our case the absorption of moisture by a cereal-based wafer material, with minimal loss of image quantification. The absolute moisture content distribution is recovered via a series of images acquired with variable phase encoding times allowing extrapolation to time zero for each image pixel and the effective removal of contrast.     

The far-infrared spectrum of deuterated hydrogen sulfide: The ground state rotational constants of D232S,D234S,HD32S,and HD34S

Pure rotation spectra of deuterated samples of hydrogen sulfide have been recorded between 25 and 280 cm^?1 with a Fourier transform spectrometer at an apodized resolution of 0.004 cm^?1. Accurate rotational and centrifugal distortion constants have been derived from the observed line positions for the four isotopic species D₂³²S, D₂³⁴S, HD³²S, and HD³⁴S. Finally, an extensive list of calculated and observed line positions, together with their calculated intensities is presented.     

Selective extraction and elution of weak bases by in-line solid-phase extraction capillary electrophoresis using a pH step gradient and a weak cation-exchange monolith

A polymer monolith bearing weak cation-exchange functionality was prepared for the purpose of demonstrating pH-selective extraction and elution in in-line solid-phase extraction-capillary electrophoresis (SPE-CE) utilising a model set of cationic analytes, namely imidazole, lutidine and 3-phenylpropanamine. Optimization of the electrolyte conditions for efficient elution of the adsorbed analytes using a moving pH boundary required that the capillary and monolith be filled with 44 mM sodium acetate at high pH (pH 6) and a low pH electrolyte of 3 mM sodium acetate pH 3 was placed in the electrolyte vials. This combination allowed the adsorbed analytes to be simultaneously eluted and focused into narrow bands, with peak widths of the eluted analytes having a baseline width of 1.2 s immediately after the monolith. Using these optimum elution conditions, the versatility of the SPE-CE approach was demonstrated by removing unwanted adsorbed components after extraction with a wash at a different pH and also by selecting a pH at which only some of the model weak bases were ionised. The analytical performance of the approach was evaluated and the relative standard deviation for peak heights, peak area and migration times were in the ranges of 1.4-5.3, 1.2-3.3 and 0.4-1.2% respectively. Analytes exhibited linear calibrations with r(2) values ranging from 0.996 to 0.999 over two orders of magnitude. Analyte pre-concentration provided excellent sensitivity, and limits of detection for the analyte used in this study were in the range 8.0-30 ng ml(-1), which was an enhancement of 63 when compared to normal hydrodynamic injection occupying 1.3% of the capillary of these bases in water.     

Identification of inorganic ions in post‐blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

Novel CE methods have been developed on portable instrumentation adapted to accommodate a capacitively coupled contactless conductivity detector for the separation and sensitive detection of inorganic anions and cations in post‐blast explosive residues from homemade inorganic explosive devices. The methods presented combine sensitivity and speed of analysis for the wide range of inorganic ions used in this study. Separate methods were employed for the separation of anions and cations. The anion separation method utilised a low conductivity 70 mM Tris/70 mM CHES aqueous electrolyte (pH 8.6) with a 90 cm capillary coated with hexadimethrine bromide to reverse the EOF. Fifteen anions could be baseline separated in 7 min with detection limits in the range 27–240 μg/L. A selection of ten anions deemed most important in this application could be separated in 45 s on a shorter capillary (30.6 cm) using the same electrolyte. The cation separation method was performed on a 73 cm length of fused‐silica capillary using an electrolyte system composed of 10 mM histidine and 50 mM acetic acid, at pH 4.2. The addition of the complexants, 1 mM hydroxyisobutyric acid and 0.7 mM 18‐crown‐6 ether, enhanced selectivity and allowed the separation of eleven inorganic cations in under 7 min with detection limits in the range 31–240 μg/L. The developed methods were successfully field tested on post‐blast residues obtained from the controlled detonation of homemade explosive devices. Results were verified using ion chromatographic analyses of the same samples.     

Localization of Fatty Acyl and Double Bond Positions in Phosphatidylcholines Using a Dual Stage CID Fragmentation Coupled with Ion Mobility Mass Spectrometry

A high content molecular fragmentation for the analysis of phosphatidylcholines (PC) was achieved utilizing a two-stage [trap (first generation fragmentation) and transfer (second generation fragmentation)] collision-induced dissociation (CID) in combination with travelling-wave ion mobility spectrometry (TWIMS). The novel aspects of this work reside in the fact that a TWIMS arrangement was used to obtain a high level structural information including location of fatty acyl substituents and double bonds for PCs in plasma, and the presence of alkali metal adduct ions such as [M?+?Li]⁺ was not required to obtain double bond positions. Elemental compositions for fragment ions were confirmed by accurate mass measurements. A very specific first generation fragment ion m/z 577 (M-phosphoryl choline) from the PC [16:0/18:1 (9Z)] was produced, which by further CID generated acylium ions containing either the fatty acyl 16:0 (C₁₅H₃₁CO⁺, m/z 239) or 18:1 (9Z) (C₁₇H₃₃CO⁺, m/z 265) substituent. Subsequent water loss from these acylium ions was key in producing hydrocarbon fragment ions mainly from the α-proximal position of the carbonyl group such as the hydrocarbon ion m/z 67 (+H₂C-HC?=?CH-CH?=?CH₂). Formation of these ions was of important significance for determining double bonds in the fatty acyl chains. In addition to this, and with the aid of ¹³C labeled lyso-phosphatidylcholine (LPC) 18:1 (9Z) in the ω-position (methyl) TAP fragmentation produced the ion at m/z 57. And was proven to be derived from the α-proximal (carboxylate) or distant ω-position (methyl) in the LPC.