Structural induced control of energy transfer within Zn(II)-porphyrin dendrimers

We report on a study of singlet-singlet annihilation kinetics in a series of Zn(II)-porphyrin-appended dendrimers, where the energy transfer efficiency is significantly improved by extending the molecular chain that connects the light-harvesting chromophores to the dendrimeric backbone with one additional carbon. For the largest dendrimer having 64 Zn(II)-porphyrins, only approximately 10% of the excitation intensity is needed in order to observe the same extent of annihilation in the dendrimers with the additional carbon in the connecting chain as compared to those without. Complete annihilation, until only one chromophore remains excited, now occurs within subunits of seven chromophores, when half of the chromophores are excited. The improvement of the annihilation efficiency in the largest dendrimer with 64 porphyrins can be explained by the presence of a the two-step delayed annihilation process, involving energy hopping from excited to nonexcited chromophores prior to annihilation. In the smallest dendrimer with only four chromophores, delayed annihilation is not present, since the direct annihilation process is more efficient than the two-step delayed annihilation process. As the dendrimer size increases and the chances of originally exciting two neighboring chromophores decreases, the delayed annihilation process becomes more visible. The additional carbon, added to the connecting chain, results in more favorable chromophore distances and orientations for energy hopping. Hence, the improved energy transfer properties makes the Zn(II)-porphyrin-appended dendrimers with the additional carbon promising candidates as light-harvesting antennas for artificial photosynthesis.     

Porphyrin-diones and porphyrin-tetraones: reversible redox units being localized within the porphyrin macrocycle and their effect on tautomerism

Porphyrin-2,3-diones and porphyrin-2,3,7,8- and porphyrin-2,3,12,13-tetraones were shown to have a redox-active unit that can function independently of the macrocycle at large. Electroreduction of 5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrin-2,3-diones [(P-dione)M] and the corresponding -2,3,12,13-tetraones [L-(P-tetraone)M] and -2,3,7,8-tetraones [C-(P-tetraone)M], where M = 2H, CuII, ZnII, NiII, and PdII was investigated and the products were characterized by ESR and thin-layer UV-visible spectroelectrochemistry. Electrochemical and spectroelectrochemical data show that the first two reductions of the porphyrin-diones and the first three reductions of the porphyrin-tetraones occur at the dione units. This was confirmed by ESR spectra of first reduction products which show that the electron spin is totally localized on a semidione unit, independent of the central metal ion and of the number and location of dione units. ESR spectra of the radical anions derived from free-base porphyrin-2,3-dione [(P-dione)2H] and porphyrin-2,3,12,13-tetraone [L-(P-tetraone)2H] confirm the trans-arrangement of the two inner protons and their location on nonsubstituted pyrrolic rings, thereby maintaining an 18-atom 18-pi electron bacteriochlorin-like aromatic delocalization pathway. The redox unit is not similarly isolated in the corner free-base porphyrin-2,3,7,8-tetraone [C-(P-tetraone)2H]. A one-electron reduction of C-(P-tetraone)2H leads to the formation of a tautomer with trans inner hydrogens with one residing on the N of the ring with the reduced unit as the only detectable product. This process is favorable because it creates a more delocalized 18-atom 18-pi electron aromatic pathway. This result is consistent with the measured redox potentials which show the first reduction of C-(P-tetraone)2H to be substantially easier than (P-dione)2H or L-(P-tetraone)2H.     

Spectroscopy of the free phenalenyl radical

After benzene and naphthalene, the smallest polycyclic aromatic hydrocarbon bearing six-membered rings is the threefold-symmetric phenalenyl radical. Despite the fact that it is so fundamental, its electronic spectroscopy has not been rigorously scrutinized, in spite of growing interest in graphene fragments for molecular electronic applications. Here we used complementary laser spectroscopic techniques to probe the jet-cooled phenalenyl radical in vacuo. Its spectrum reveals the interplay between four electronic states that exhibit Jahn-Teller and pseudo-Jahn-Teller vibronic coupling. The coupling mechanism has been elucidated by the application of various ab initio quantum-chemical techniques.     

Application of density functional theory to the investigation of polymer degradation: Example of cross-linked ethylene–vinyl acetate–vinyl alcohol (EVA-OH) terpolymer de-acetylation

We report on the application of Density Functional Theory (DFT) methodologies to investigate the degradation of polymer materials and provide new insights into the effects of degradation on molecular geometry. The temperature- and radiation-assisted degradation of a cross-linked ethylene–vinyl acetate–vinyl alcohol (EVA-OH) elastomer was studied both experimentally and theoretically, in order to correlate observable parameters with theoretically calculated electronic properties. Experiments showed ‘yellowing’ of the material, outgassing of acetic acid, and attenuated IR deformation modes upon exposure to increased levels of gamma radiation or increased temperatures, consistent with the de-acetylation model in which acetic acid is abstracted from the vinyl acetate group via a molecular rearrangement involving the displacement of a hydrogen atom from the ethylene backbone toward the acetyl group, and the propagation of the mechanism to adjacent vinyl acetate groups, forming polyenes in the polymer backbone. DFT modeling predicted the molecular structures of the cross-linked EVA-OH polymer for various degrees of de-acetylation, with corresponding IR and UV–visible absorption spectra. Theoretical attenuated IR deformation modes matched experimental observations, and the theoretical absorption spectrum of polyenes with 5 double bonds matched the optical absorption data, shedding light onto the final chemical structure of the polymer fragment. In addition, DFT unveiled precise and local effects of de-acetylation on the geometry of both the remaining polymer chain and cross-linker, which could only be detected as methylene deformation mode reflectance changes by IR spectroscopy.     

Tartaric acid extraction of organotin compounds from sediment samples

A new extraction method for the determination of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediments based on extraction with tartaric acid and methanol has been developed. Tin species were extracted from sediment samples using focused microwave technology, then ethylated with sodium tetraethylborate (NaBEt₄) and analyzed by isotope dilution (ID) gas chromatography-mass spectrometry (GC-MS). The advantages of such methodology in comparison with other established extraction methods for the routine speciation analysis of organotin compounds are discussed with respect to sulfur interferences co-extracted from complex matrices.Interferences from elemental sulfur are normally found with acetic acid extraction, but with tartaric acid extraction these interferences were eliminated, demonstrating selective extraction.The accuracy of the analytical procedure was established by analyzing a certified reference material (CRM) (PACS-2, marine sediment) and comparing the results to the certified values. Good agreement between determined and certified values for butyltin compounds was obtained. Finally, some complex sediment samples collected from San Vicente's Bay, Chile, were analyzed with the proposed methodology, demonstrating its potential value for monitoring butyltins in environmental samples with high concentrations of sulfur compounds.     

Entropically driven photochemical upconversion

Conventional photochemical upconversion (UC) through homo-geneous triplet-triplet annihilation (TTA) is subject to several enthalpic losses that limit the UC margin. Here, we address one of these losses: the triplet energy transfer (TET) from the sensitizer to the emitter molecules. Usually, the triplet energy level of the emitter is set below that of the sensitizer. In our system, the triplet energy level of the emitter exceeds that of the sensitizer by ～600 cm(-1). Choosing suitable concentrations for the sensitizer and emitter molecules, we can exploit entropy as a driving force for the migration of triplet excitation from the sensitizer to the emitter manifolds. Thereby we obtain a new record for the peak-to-peak TTA-UC energy margin of 0.94 eV. A modified Stern-Volmer analysis yields a TET rate constant of 2.0 × 10(7) M(-1) s(-1). Despite being relatively inefficient, the upconverted fluorescence is easily visible to the naked eye with irradiation intensities as low as 2 W cm(-2).     

Borrowing hydrogen methodology for amine synthesis under solvent-free microwave conditions

Application of microwave heating to the Borrowing Hydrogen strategy to form C-N bonds from alcohols and amines is presented, removing the need for solvent and reducing the reaction times while still yielding results comparable with those using thermal heating.     

Rapid fusion method for determination of actinides in fecal samples

A new rapid fusion method for the determination of actinides in fecal samples has been developed at the Savannah River National Laboratory that can be used for emergency response or routine bioassay analyses. If a radiological dispersive device, improvised nuclear device or nuclear accident occur, there will be an urgent need for rapid analyses of environmental, food and bioassay matrices. If an inhalation event occurs and there is confirmed radionuclide activity present via urine analyses of individuals, fecal analyses will typically be required to determine the soluble/insoluble fraction of actinides present as a result of the event to allow a more reliable estimate of radiological dose. The new method for actinides in fecal samples uses accelerated furnace heating, a rapid sodium hydroxide fusion method, a lanthanum fluoride matrix removal step, and a column separation process with stacked TEVA, TRU and DGA resin cartridges. The rapid fusion method provides rugged digestion of any refractory particles present, essential for reliable analysis of actinides in fecal samples. Alpha spectrometry was used to determine the actinide isotopes, but this method can be adapted for assay by inductively-coupled plasma mass spectrometry for actinide isotopes with longer half-lives that have sufficient mass to allow measurement. The method showed high chemical recoveries and effective removal of interferences. The determination of actinides in fecal samples can be performed in less than 12 h in an emergency with excellent quality for emergency samples. The new method, which is much less tedious and time-consuming than other reported methods, can be used for emergency or routine fecal sample analyses. This enables more timely estimates of radiological dose to be performed that utilize soluble/insoluble actinide ratios.     

Rapid determination of 210Po in water samples

A new rapid method for the determination of ²¹⁰Po in water samples has been developed at the Savannah River National Laboratory (SRNL) that can be used for emergency response or routine water analyses. If a radiological dispersive device event or a radiological attack associated with drinking water supplies occurs, there will be an urgent need for rapid analyses of water samples, including drinking water, ground water and other water effluents. Current analytical methods for the assay of ²¹⁰Po in water samples have typically involved spontaneous auto-deposition of ²¹⁰Po onto silver or other metal disks followed by counting by alpha spectrometry. The auto-deposition times range from 90 min to 24 h or more, at times with yields that may be less than desirable. If sample interferences are present, decreased yields and degraded alpha spectrums can occur due to unpredictable thickening in the deposited layer. Separation methods have focused on the use of Sr Resin?, often in combination with ²¹⁰Pb analysis. A new rapid method for ²¹⁰Po in water samples has been developed at the SRNL that utilizes a rapid calcium phosphate co-precipitation method, separation using DGA Resin^® (N,N,N′,N′ tetraoctyldiglycolamide extractant-coated resin, Eichrom Technologies or Triskem-International), followed by rapid microprecipitation of ²¹⁰Po using bismuth phosphate for counting by alpha spectrometry. This new method can be performed quickly with excellent removal of interferences, high chemical yields and very good alpha peak resolution, eliminating any potential problems with the alpha source preparation for emergency or routine samples. A rapid sequential separation method to separate ²¹⁰Po and actinide isotopes was also developed. This new approach, rapid separation with DGA resin plus microprecipitation for alpha source preparation, is a significant advance in radiochemistry for the rapid determination of ²¹⁰Po.     

Development of a polarized 3He ion source for RHIC

A Polarized ³He Ion Source in under development for use at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The gas will be polarized using metastability exchange optical pumping, then transferred into the Electron Beam Ion Source for ionization. Nuclear polarization of order 70% is expected under optimal conditions, and roughly 10¹¹ doubly-ionized ³He⁺⁺ ions will be created in each 20 μs pulse.