Determination of in-core power in low energy research reactors by measurement of16N and18F in the primary coolant

The measurement of¹⁶N and¹⁸F activity in the primary coolant of the JASON Argonaut reactor has been used to monitor in-core reactor power. The¹⁶N is produced by the¹⁶O(n, p)¹⁶N reaction and the 6.1 MeV photopeak was measured on-line using a BGO detector adjacent to the primary coolant circuit. These data provided a relative measure of power stability during steady state operation and a measure of linearity at different power levels. The¹⁸F is produced in the primary coolant by the¹⁸O(p, n)¹⁸F reaction and aliquots of primary coolant were sampled from the reactor dump tank for off-line radiochemical analysis. The¹⁸F was separated as trimethylfluorosilane and the activity was determined by measurement of the 0.511 MeV annihilation photopeak using a NaI(TI) detector. The measured¹⁸F activity was used to determine actual in-core reactor power using both ab-initio calculations and by comparison of results with a calibrated power reactor. The¹⁸F data also provided a method of nomalising the¹⁶N data for direct monitoring of in-core reactor power in JASON.     

THE EFFECTS OF PORPHYRIN STRUCTURE AND AGGREGATION STATE ON PHOTOSENSITIZED PROCESSES IN AQUEOUS AND MICELLAR MEDIA

The efficiency of several porphyrins at 10 μM and 83 μM as sensitizers of the photooxidation of 0.1 mM tryptophan and histidine via a singlet oxygen-mechanism was studied in pH 7.4-buffered aqueous solutions and in aqueous dispersions of Triton X-100 micelles. The porphyrins were either solubilized in the bulk aqueous medium or associated with the micellar phase, whereas the amino acids were always located in the aqueous phase. With those porphyrins, such as uroporphyrin I, meso-tetra (4-sulfonatophenyl)porphine, meso-tetra(4-carboxyphenyl)porphine and meso-tetra)N,N,N-trimethylanilinium)porphine, which are > 98% monomeric in both media, the efficiency of histidine photooxidation was independent of the site of O₂(¹Δ_g) generation, as shown by the closely similar values for the photooxidation rate constant and oxygen-consumption quantum yield in the presence and absence of Triton micelles; the same indications were provided by photokinetic experiments with tryptophan. Actually, laser flash photolysis studies showed that the micelle-incorporation of the above mentioned porphyrins brought about only minor changes in their photophysical properties, including the relative yield of O₂(¹Δ_g) generation. On the other hand, hematoporphyrin IX, its Zn²⁺-complex, and coproporphyrin III are largely aggregated in homogeneous aqueous solution; their incorporation into Triton micelles caused an increase of the triplet quantum yield and an enhancement of the oxygen-consumption quantum yield and photooxidation rate constant for both histidine and tryptophan. The lower photosensitizing efficiency of aggregated porphyrin species in comparison with the corresponding monomeric porphyrin was confirmed by measuring the initial rate and quantum yield of oxygen consumption upon irradiation of 1 mM histidine and tryptophan in the presence of different hematoporphyrin concentrations within the 0.3-100μM range.     

Excitation functions for (α,xn) reactions on107Ag and109Ag

Excitation functions have been measured for yields of In isotopes in the reactions¹⁰⁷Ag(, xn)^111–xIn and¹⁰⁹Ag(, xn)^113–xIn for x=1–5. The alpha particle bombardment of natural silver, the stacked foil technique for irradiation and semiconductor gamma-spectrometry for measurements were used.This work has been sponsored by the Subsecretaría de Ciencia y Tecnología, Argentina.     

Low temperature specific heat calculations for amorphous polystyrene

Numerous attempts have previously been made to explain low temperature specific heat anomalies in glasses. The potential value of low frequency Raman data in interpreting such results is demonstrated here: the density of states for the 60 cm^?1 side-group mode in amorphous polystyrene is calculated from Raman measurements. Using the harmonic approximation, the contribution to the specific heat from this side-group motion is calculated and added to the Debye term. The form of C/T³ between 1.5 and 4 K is shown to be reproduced, although the magnitude of C/T³ is only about 70% of experimental values. This discrepancy and the anomalous behaviour below 1.5 K is believed to the due to lower-lying vibrational states of the system, perhaps not accessible through Raman scattering experiments.     

Über die Systeme AJ/CoJ2 und die kristallchemischen Beziehungen in der Gruppe der Doppelhalogenide AnCoX(n+2) mit X = Cl,Br, J [1]

The Systems AI/CoI₂ (A = Alkali Metal, Tl, Ag) and the Crystal Chemistry of the Double Halides A_nCoX_(n+2) with X = Cl, Br, I The systems AI/CoI₂ (A = Cs, Rb, K, Tl, Na, Ag) were investigated by differencethermal analysis. The systems of NaI and AgI are found to be eutectical. A compound A₂CoI₄ always exists in the other systems. Cs₂CoI₄ crystallizes in the β-K₂SO₄ type with a coordination number (C.N.) for Cs equal to 9/10. Results obtained with single crystal technique reveal for the first time that among the double halides Rb₂CoI₄ is of the monoclinic Sr₂GeS₄ type (C. N. for Rb = 6(+2)). The compounds K₂CoJ₄, Tl₂CoJ₄, T-K₂CoBr₄, and T-Tl₂CoBr₄ are isotypic. Both structure groups are characterized by isolated CoX₄^2? tetrahedra. Reflectance spectra and magnetic susceptibilities can be explained on the basis of crystal field theory. – Our results close presently existing gaps in the knowledge on systems of CoBr₂ and CoCl₂ too.     

A gas electron diffraction and ab initio quantum-mechanical investigation into the molecular structure of tricyclo-(3.1.002,4)-hexane

The structure of tricyclo-(3.1.00^2,4)exane has been determined by gas phase electron diffraction. The molecule has an inversion centre. The mean carbon—carbon bond length, averaged over both three- and four-membered rings is 1.508 A. A model with equal C-C bond lengths fits to the measured diffraction intensities. The four-membered ring is planar with valency angles of 90°, while the carbon atoms of the three-membered rings form isosceles triangles. Ab initio quantum mechanical calculations at the STO-3G level support this geometry. The valency angle CCC (between three- and four-membered rings) for the equilateral four-membered ring model has been found experimentally to be 109.9°. The average C-H bond distance (1.080 Å) is small as a result of increased s-character in these bonds in agreement with reported INDO—LMO calculations.     

An electrochemical study of redox indicators : Part I. Substituted chrysoidines

The electrochemical oxidation of various substituted chrysoidines was studied by cyclic voltammetry, to determine which have stable oxidation products. Only 4-hydroxy-chrysoidine has a stable product; the apparent oxidation potential is 0.779 V vs. NHE. 4-Methoxy- and 4-ethoxy-chrysoidine rapidly lose methanol or ethanol, respectively, so that the 4-hydroxychrysoidine wave appears on subsequent scans. All the other chrysoidines studied are irreversible. The results indicate that a hydroxy group in the 4-position is necessary for stability; the 4-alkoxychrysoidines can achieve the stable quinoidal structure by cleavage of the alkoxy group after nucleophilic attack.     

Obtention de selenopysultones lors de l'oxydation de thio-1 chromenes par le dioxyde de selenium

Selenium dioxide oxidation of 1-thiochromene leads to 3-formyl (5,6)benzo-1,2 thiaseleninne-1,1-dioxide, which is a representative of a hitherto unknown class of heterocyclic compounds. Pyrolysis of this compound leads to 2-formyl benzo(b)selenophen, by loss of sulphur dioxide. The reaction can be applied to other 1 thiochromenes but no similar behaviour has been observed for their selenium isologues.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Ein Computerverfahren für die Massenspektrometrische Untersuchung Organischer Proben bei Fraktionierter Direktverdampfung

A procedure is described for use of an on-line digital computer to acquire and process low resolution mass spectra obtained by a fractionated evaporation technique. The procedure generates unambiguous spectra from uniform solid or liquid organic substances, and characteristic spectra from multicomponent organic solid or liquid samples. The system is realised with minimal hardware configuration.