Pinacyanol as a mode-locking saturable absorber for Rhodamine dye lasers

The absorption recovery time of the ground state of pinacyanol (S₁ → S₀) can be varied through the choice of solvent from 10 ps in methanol to 300 ps in glycerol. We show that mode-locking of Rhodamine 6G and Rhodamine B dye lasers can be achieved using methanol, DMSO or glycerol solutions.     

Integrated Planning in a Steelworks: The Choice of Alternative Practices in Previous Processes to Augment Productivity at the Final Rolling Stage

The case study presented in this paper is an example in which the very different contingencies associated, on the one hand, with steel-making and, on the other hand, with cold rolling are considered together in seeking a maximum of profitability. In the works under investigation the steel-making area was a general bottleneck, while the cold mill was a bottleneck specific to the most profitable products, and the solution obtained actually involved a narrowing of the general bottleneck. The methods of calculation used in this study are not original. It is their synthesis leading to the technically important decision to create a new ingot size which deserves attention.     

Validity of phase space theory for atom-diatom insertion reactions

Phase space theory (PST) is applied to the calculation of state-resolved integral and differential cross sections for the complex-forming atom-diatom insertion reactions A + H(2) --> AH(2) --> AH + H with A = C((1)D), S((1)D), O((1)D), and N((2)D). In the asymptotic channels, vibration motion is quantized while rotation and translation motions are treated classically. The approach is compared to exact quantum scattering calculations and quantum statistical models. Given the simplicity of PST, the agreement with the previous much more refined treatments is very satisfying. Although PST is a well-established theory, this work is, to our knowledge, the first such systematic comparison of its predictions with accurate quantum scattering and quantum statistical calculations.     

Far-field imaging of the electromagnetic local density of optical states

We introduce a new experimental method to measure the local electromagnetic density of states (LDOS) by integrating the differential scattering cross section. The signal detected essentially reflects the intrinsic scattering response of the photonic structures and renders the partial LDOS dominated by evanescent modes. We give a theoretical understanding of the LDOS image formation and show a qualitative agreement between experimental images and theoretical maps. This approach can be practically applied to the direct measurement of an optical antenna's scattering efficiency and can provide valuable information for designing optimum structures utilized in radiative decay engineering.     

One-step purification of 3,4-dihydroxyphenyllactic acid, salvianolic acid B, and protocatechualdehyde from Salvia miltiorrhiza Bunge by isocratic stepwise hydrogen bond adsorption chromatography on cross-linked 12% agarose

Three major active components of the traditional Chinese medicinal herb Salvia miltiorrhiza Bunge, 3,4-dihydroxyphenyllactic acid, salvianolic acid B, and protocatechualdehyde, are separated and purified from a crude water extract in one step by isocratic hydrogen bond adsorption chromatography on cross-linked 12% agarose (Superose 12 HR 10/30). Separation is achieved by stepwise elution with mobile phases composed of mixtures of ethanol and acetic acid: 0-50 mL, 5% ethanol, 5% acetic acid; 50-100 mL, 20% ethanol, 20% acetic acid; and 100-200 mL, 30% ethanol, 30% acetic acid. The 3,4-dihydroxyphenyllactic acid is obtained with a purity of 97.3% and with a recovery of 88.1%. The corresponding figures for protocatechualdehyde are a purity of 99.4% with a recovery of 90.7%, and for salvianolic acid B a purity of 90.4% with a recovery of 50.3%, respectively. At a sample load of 40 mg crude extract dissolved in 0.5 mL mobile phase (corresponding to a load of 1.6 mg/mL gel), a 3,4-dihydroxyphenyllactic acid purity of approximately 94% with a recovery of 80.2% is obtained.     

Ammine magnesium borohydride complex as a new material for hydrogen storage: structure and properties of Mg(BH4)2.2NH3

The ammonia complex of magnesium borohydride Mg(BH4)2.2NH3 (I), which contains 16.0 wt % hydrogen, is a potentially promising material for hydrogen storage. This complex was synthesized by thermal decomposition of a hexaaammine complex Mg(BH4)2.6NH3 (II), which crystallizes in the cubic space group Fm3 m with unit cell parameter a=10.82(1) A and is isostructural to Mg(NH3) 6Cl2. We solved the structure of I that crystallizes in the orthorhombic space group Pcab with unit cell parameters a=17.4872(4) A, b=9.4132(2) A, c=8.7304(2) A, and Z=8. This structure is built from individual pseudotetrahedral molecules Mg(BH4)2.2NH3 containing one bidentate BH4 group and one tridentate BH4 group that pack into a layered crystal structure mediated by N-H...H-B dihydrogen bonds. Complex I decomposes endothermically starting at 150 degrees C, with a maximum hydrogen release rate at 205 degrees C, which makes it competitive with ammonia borane BH 3NH3 as a hydrogen storage material.     

A scanning tunneling microscopy study of distyrylbenzene on Ag/Ge(111)-(sqr rt of 3 x sqr rt of 3)R30 degrees

The adsorption and self-organized monolayers of trans,trans-distyrylbenzene (tt-DSB) and cis,cis-distyrylbenzene (cc-DSB) on Ag/Ge(111)-(sqr rt of 3 x sqr rt of 3)R30 degrees (Ag/Ge(111)-sqr rt of 3) were studied by low-temperature scanning tunneling microscopy (STM) in ultrahigh vacuum. tt-DSB and cc-DSB overlayers were prepared by vapor deposition at a substrate temperature of 200 K and imaged after the samples were cooled to 100 K. High-resolution images allow identification of the internal structure of individual tt-DSB molecules with three phenyl rings and their molecular arrangements on the Ag/Ge(111)-sqr rt of 3 surface. It is found that the intermolecular distance between two terminal phenyl rings in tt-DSB is about twice the lattice constant of Ag/Ge(111)-sqr rt of 3. Such a lattice match makes Ag/Ge(111)-sqr rt of 3 an ideal substrate for tt-DSB self-organization and the formation of a (3 x 1) overlayer unit cell. The structural model and the molecule registry corresponding to STM images for the adlayers of tt-DSB on Ag/Ge(111)-sqr rt of 3 are proposed and discussed. For cc-DSB adsorption on Ag/Ge(111)-sqr rt of 3, uniform molecular overlayers with two discernible molecular images corresponding to two major types of cc-DSB conformers were observed. The coexistence of multiple conformers and the mismatch of molecular dimension of cc-DSB with the substrate unit cell length limit the growth of large cc-DSB domains.     

A wide range modeling study of dimethyl ether oxidation

A detailed chemical kinetic model has been used to study dimethyl ether (DME) oxidation over a wide range of conditions. Experimental results obtained in a jet-stirred reactor (JSR) at 1 and 10 atm, 0.2≤ϕ≤2.5, and 800≤T≤1300 K were modeled, in addition to those generated in a shock tube at 13 and 40 bar, ϕ=1.0 and 650≤T≤1300 K. The JSR results are particularly valuable as they include concentration profiles of reactants, intermediates, and products pertinent to the oxidation of DME. These data test the kinetic model severely, as it must be able to predict the correct distribution and concentrations of intermediate and final products formed in the oxidation process. Additionally, the shock-tube results are very useful, as they were taken at low temperatures and at high pressures, and thus undergo negative temperature dependence (NTC) behavior. This behavior is characteristic of the oxidation of saturated hydrocarbon fuels, (e.g., the primary reference fuels, n-heptane and iso-octane) under similar conditions. The numerical model consists of 78 chemical species and 336 chemical reactions. The thermodynamic properties of unknown species pertaining to DME oxidation were calculated using THERM. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 229–241, 1998.     

Structure-based secondary structure-independent approach to design protein ligands: Application to the design of Kv1.2 potassium channel blockers

We have developed a structure-based approach to the design of protein ligands. This approach is based on the transfer of a functional binding motif of amino acids, often referred as to the "hot spot", on a host protein able to reproduce the functional topology of these residues. The scaffolds were identified by a systematic in silico search in the Protein Data Bank for proteins possessing a group of residues in a topology similar to that adopted by the functional motif in a reference ligand of known 3D structure. In contrast to previously reported studies, this search is independent of the particular secondary structure supporting the functional motif. To take into account the global properties of the host protein, two additional criteria were taken into account in the selection process: (1) Only those scaffolds sterically compatible with the positioning of the functional motif as observed in a reference complex model were retained. (2) Host proteins displaying electrostatic potentials, in the region of the transferred functional motif, similar to that of the reference ligand were selected. This approach was applied to the development of protein ligands of the Kv1.2 channel using BgK, a small protein isolated from the sea anemone Bunodosoma granulifera, as the reference ligand. Four proteins obtained by this approach were produced for experimental evaluation. The X-ray structure of one of these proteins was determined to check for similarity of the transferred functional motif with the structure it adopts in the reference ligand. Three of these protein ligands bind the Kv1.2 channel with inhibition constants of 0.5, 1.5, and 1.6 microM. Several mutants of these designed protein ligands gave binding results consistent with the presumed binding mode. These results show that protein ligands can be designed by transferring a binding motif on a protein host selected to reproduce the functional topology of this motif, irrespective to the secondary structure supporting the functional motif, if the host protein possesses steric and electrostatic properties compatible with the binding to the target. This result opens the way to the design of protein ligands by taking advantage of the considerable structural repertoire of the Protein Data Bank.     

Mode-locked ring lasers for the backscattering measurement of mirrors

A new method for measuring the backscattering produced by mirrors is presented. A mode-locked ring laser allows us to achieve more sensitivity than with any other technique. The present sensitivity to a minimum intensity backscattering coefficient (ratio of backscattered versus incident intensity) of 10(-15) can be enhanced through stabilization. We compare results realized with this technique with results issued from classical bidirectional reflectance distribution function measurements.