Numerical simulation and experimental validation of heat transfer within rotating flows for three‐dimensional non‐axisymmetric,turbulent conditions

A control volume type numerical methodology for the analysis of steady three‐dimensional rotating flows with heat transfer, in both laminar and turbulent conditions, is implemented and experimentally tested. Non‐axisymmetric momentum and heat transfer phenomena are allowed for. Turbulent transport is alternatively represented through three existing versions of the k–ε model that were adjusted to take into account the turbulence anisotropy promoted by rotation, streamline curvature and thermal buoyancy. Their relative performance is evaluated by comparison of calculated local and global heat balances with those obtained through measurements in a laboratory device. A modified version of the Lam and Bremhorst, low Reynolds number model is seen to give the best results. A preliminary analysis focused on the flow structure and the transfer of heat is reported. Copyright © 2002 John Wiley & Sons, Ltd.     

On Numerical Solution of Shape Inverse Problems

The new method is proposed for the numerical solution of a class of shape inverse problems. The size and the location of a small opening in the domain of integration of an elliptic equation is identified on the basis of an observation. The observation includes the finite number of shape functionals. The approximation of the shape functionals by using the so-called topological derivatives is used to perform the learning process of an artificial neural network. The results of computations for 2D examples show, that the method allows to determine an approximation of the global solution to the inverse problem, sufficiently closed to the exact solution. The proposed method can be extended to the problems with an opening of general shape and to the identification problems of small inclusions. However, the mathematical theory of the proposed approach still requires futher research. In particular, the proof of global convergence of the method is an open problem.     

The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

Cooperative Strategies for Solving the Bicriteria Sparse Multiple Knapsack Problem

For hard optimization problems, it is difficult to design heuristic algorithms which exhibit uniformly superior performance for all problem instances. As a result it becomes necessary to tailor the algorithms based on the problem instance. In this paper, we introduce the use of a cooperative problem solving team of heuristics that evolves algorithms for a given problem instance. The efficacy of this method is examined by solving six difficult instances of a bicriteria sparse multiple knapsack problem. Results indicate that such tailored algorithms uniformly improve solutions as compared to using predesigned heuristic algorithms.     

Multifunctional ToF-SIMS: combinatorial mapping of gradient energy substrates

We present a simple method for chemical modification of chlorosilane self-assembled monolayers (SAMs) on Si surfaces by exposure to a gradient of UV-ozone radiation to create stable substrates with a range of contact angles (θ_H2O≈5–95°) and surface energies on a single substrate. These gradient energy substrates are developed to potentially generate libraries for combinatorial studies of thin film phenomenology, where a systematic variation of interfacial surface energy represents one of the significant parameters along one axis. The graded oxidation process presents a systematic variation of surface chemical composition. We have utilized contact angle measurements and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to investigate this variation for a series of ions, among which are SiCH₃⁺, SiOH⁺ and COOH⁻. We show that the macroscopic measurements of surface free energy/contact angle correlate with the detailed analysis of surface chemistry (as assessed by ToF-SIMS) on these test substrates.     

Response dynamics of goldfish saccular fibers: effects of stimulus frequency and intensity on fibers with different tuning, sensitivity, and spontaneous activity

The effects of stimulus frequency and intensity on response patterns (PST histograms) to tone burst stimulation were examined in differently tuned saccular fibers of the goldfish. In addition, the sensitivity of these fibers to amplitude-modulated (AM) signals of different carrier frequencies was measured. The response patterns evoked by unmodulated signals were a complex function of tuning, spontaneous activity and sensitivity of the fiber, and the frequency and intensity of the signal. Frequency-dependent response patterns were found in low-frequency fibers with best frequencies (BF) below 200 Hz. Responses in these fibers ranged from tonic to phasic in nonspontaneous fibers and included more complex patterns in spontaneously active fibers, such as suppression of evoked activity below spontaneous levels. Midfrequency fibers (BF = 500-600 Hz) showed responses similar to those in low-frequency fibers, but with less dependence on frequency. In contrast, both high-frequency (BF = 800-1000 Hz) and wideband, untuned fibers showed frequency-invariant patterns of adaptation. High-frequency fibers were equally sensitive to AM signals at all frequencies tested. The sensitivity of low-frequency fibers to AM, however, increased as a function of carrier frequency and corresponded to the degree of adaptation in response to unmodulated tones. In general, the AM sensitivity of a fiber could be predicted more by its pattern of response to unmodulated signals than by its tuning characteristics.     

The role of water vapour on the oxidation of two Ln-Si-Al-O-N glasses (Ln=Y, La)

The oxidation behaviour of LnSiAlON (Ln=Y, La) glasses was studied at different temperatures (990-1150 °C) and under different water vapour pressures (360-2690 Pa). These results were also compared with those obtained under O₂, N₂/H₂O or O₂/H₂O mixtures. When glasses are treated under a N₂/H₂O mixture, optical and SEM observations show porous scales. Transformations of the reaction rate data and a kinetic model show that there is only one limiting process occurring during oxidation. This rate limiting step is the progress of the chemical reaction at the internal interface. Determination of the pressure law dependence and thermodynamics calculations of water vapour molecules dissociation at the investigated temperatures allow us to suggest that the mechanism of oxidation corresponds to decomposition of water molecules on the oxynitride glass surface.     

Pressure effects on the quadrupole coupling constant of 7Li in first stage lithium graphite

The pressure dependence of the experimental ⁷Li NMR spectra is reported for first stage lithium graphite (LiC₆) intercalation compound at temperatures T = 232 and 293 K. This experiment together with the presented point charge model calculation of the ⁷Li quadrupole coupling constant $\text{(}\text{e}{}^2\text{qQ}\text{h}\text{)}$ allows an unambiguous determination of the sign of e²qQ/h which is negative: $\text{e}{}^2\text{qQ}\text{h=-52 kHz}$ at p = 1 bar and T = 232 K. The averaged location of the electrons transferred from the Li intercalant to the graphite layers, as estimated in this study, is in excellent agreement with earlier theoretical energy-band calculations. The compressibility of LiC₆ in the c-direction is predicted to be k_c = 1.7 × 10^-12cm²dyn^-1, it agrees with estimates derived from the available phonon dispersion relations.     

Mode-locking dynamics of a laser coupled to an empty external cavity

The effect of incorporating an empty external cavity into the feedback loop of a mode-locked laser is investigated. Particular attention is paid to the response of the mode-locking as the external cavity is detuned by a fraction of a wavelength from the round trip transit time associated with the laser. The results for two regimes of operation are presented. In the first case a series of short lived transients develop whereas the other case leads to a persistent intermittent Q-switching scenario, where mode-locking fails. The role of coupling between the cavities and the laser's memory time in relation to the results is discussed. A mechanism for the improved mode-locking observed with non-linear external cavities is suggested.     

Generalized fractional programming duality: A parametric approach

Using a parametric approach, duality is presented for a minimax fractional programming problem that involves several ratios in the objective function.The first author is thankful to Natural Science and Engineering Research Council of Canada for financial support through Grant A-5319, and the authors are thankful to the anonymous referees for useful suggestions.