Control of the block copolymer morphology in templated epoxy thermosets

It has been found that by the addition of low concentrations of an amphiphilic block copolymer to an epoxy resin, novel disordered morphologies can be formed and preserved through curing. This article will focus on characterizing the influence of the block copolymer and casting solvent on the templated morphology achieved in the thermoset sample. The ultimate goal of this work is to determine the parameters that would control the microphase morphology produced. Epoxy resins blended with a series of amphiphilic block copolymers based on hydrogenated polyisoprene (polyethylene-alt-propylene or PEP) and polyethylene oxide (PEO), specifically, were investigated. In this article, the cure-induced order–order phase transition from the spherical to wormlike micelle morphology will also be discussed. It is proposed that the formation of the wormlike micelle structure from the spherical micelle structure is similar to the phase transition behavior that occurs in dilute block copolymer solutions as a function of the influence of the solvent on micelle morphology. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3338–3348, 2007     

The Systematics of Muonium Hyperfine Constants

The hyperfine constants for muonium in elemental and binary inorganic solids suggest formation of three different families of defect centre, with distinct electronic structures. The overall range of values, spanning nearly five orders of magnitude, and their correlation with host properties such as band gap and electron affinity, reveal a deep-to-shallow instability which has profound implications for the electrical properties of hydrogen impurity in electronic materials, both semiconducting and dielectric.     

Carbide precipitates in solution-quenched PH13-8 Mo stainless steel: A small-angle neutron scattering investigation

This paper deals with the small-angle neutron scattering (SANS) investigation on solution-quenched PH13-8 Mo stainless steel. From the nature of the variation of the functionality of the profiles for varying specimen thickness and also from the transmission electron microscopy (TEM), it has been established that the small-angle scattering signal predominantly originates from the block-like metallic carbide precipitates in the specimen. The contribution due to double Bragg reflection is not significant in the present case. The single scattering profile has been extracted from the experimental profiles corresponding to different values of specimen thickness. In order to avoid complexity and non-uniqueness of the multi-parameter minimization for randomly oriented polydisperse block-like precipitate model, the data have been analyzed assuming randomly oriented polydisperse cylindrical particle model with a locked aspect ratio.     

Long range one-dimensional ordering of lead phthalocyanine monolayer on InSb(1 0 0) (4 × 2)/c(8 × 2)

Sub-monolayer and monolayer of lead phthalocyanine deposited on InSb(1 0 0) (4 × 2)/c(8 × 2) surface have been investigated by scanning tunneling microscopy and low energy electron diffraction. Molecules first adsorb on the indium rows of the (4 × 2)/c(8 × 2) structure in the [1 1 0] direction and diffuse at the surface in order to form two-dimensional islands. The molecule-substrate interaction stabilizes the PbPc molecules on the In rows. It weakens the interaction between molecules located in adjacent rows resulting in numerous gliding planes between the molecular chains, in the direction parallel to the rows. At monolayer completion, a long-range one-dimensional order is adopted by the molecules in the [1 1 0] direction.     

Microstructural evolution of decagonal quasicrystal in the undercooled Al72Ni12Co16 alloy melts

The microstructure evolution of decagonal quasicrystals in Al₇₂Ni₁₂Co₁₆ alloy was investigated by the electromagnetic melting and cyclic superheating method. Single-phase decagonal quasicrystals have been obtained when the undercoolings were larger than 60 K. The decagonal quasicrystals formed at various undercoolings show different microstructural morphologies. Furthermore, grain refinement was found near the undercooling of 120 K. Based on current thermodynamic and dendrite growth theories, a dimensionless superheating parameter was adopted to explain the effect of processing conditions on the microstructure of Al₇₂Ni₁₂Co₁₆ alloy. The result indicate that the fine equiaxied microstructure of decagonal quasicrystal (D-phase) formed near on undercooling of 120 K originates from the break-up of dendrites.     

Degradative chain transfer in vinyl acetate polymerizations using toluene as solvent

In this work, we propose that retardation in vinyl acetate polymerization rate in the presence of toluene is due to degradative chain transfer. The transfer constant to toluene (C_trs) determined using the Mayo method is equal to 3.8 × 10^?3, which is remarkably similar to the value calculated from the rate data, assuming degradative chain transfer (2.7 × 10^?3). Simulations, including chain‐length‐dependent termination, were carried out to compare our degradative chain transfer model with experimental results. The conversion–time profiles showed excellent agreement between experiment and simulation. Good agreement was found for the M_n data as a function of conversion. The experimental and simulation data strongly support the postulate that degradative chain transfer is the dominant kinetic mechanism. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3620–3625, 2007     

Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

Amorphous chalcogenide AgSbS2 films prepared by pulsed laser deposition

The pulsed laser deposition technique has been applied to prepare amorphous ternary AgSbS films. The films were prepared from AgSbS₂ bulk glass using a KrF excimer laser. The composition of prepared films according to the results of the energy dispersive X-ray analysis and the Rutherford backscattering was close to bulk one. Optical transmission and spectral dependence of the refractive index proved the good optical quality of the films. The Ar⁺ ion laser dot exposures of the films show a potential applicability of the films as a new type of optical recording material. PACS 78.66.Jg; 81.15.Fg; 81.40.Wx     

Structure and morphology of laser-ablated WO3 thin films

The structure and surface morphology of WO₃ thin films deposited by a laser-ablation technique have been found to be strongly dependent on the deposition conditions and the nature of the substrate. By precisely controlling the substrate temperature and the oxygen partial pressure, amorphous, polycrystalline, nano-crystalline and iso-epitaxial WO₃ thin films were successfully grown. The structure and surface morphological features of the films from X-ray diffraction and atomic force microscopy data are described in relation to the deposition conditions. PACS 81.15.Fg; 68.55.-a; 68.37.Ps     

Creating, detecting and locating ultracold molecules in a surface trap

Ultracold molecules have been produced by photoassociation of Cs atoms trapped in a mirror magneto-optical trap. The molecules were detected by resonantly enhanced multi-photon ionization followed by time-of-flight mass spectroscopy. The time-of-flight ofatomic and molecular ions was investigated in the presence of a dc bias voltageapplied to the conducting mirror. This technique provides a new tool for determining the distance between the cold molecules and the mirror surface. This revised version was published online in August 2005 with a corrected cover date.