Synthesis and electrical characteristics of polyaniline nanoparticles and their polymeric composite

Monodisperse polyaniline nanoparticles (PAPSSA) were synthesized from an oxidative dispersion polymerization using poly(sodium 4-styrenesulfonate) (PSSA) as both a polymeric stabilizer and a dopant agent due to its acidity. The nanoparticles were being stabilized with two different molecular weight of PSSA. Size effect of PAPSSA particles were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The d.c. electrical conductivity of composite films on the glass substrate was measured by a four-probe method. It was found that the electrical properties of the composite films are affected by the content of nano-sized polyaniline and different molecular weights of stabilizer in the poly(vinyl alcohol) (PVA) matrix.     

Gamow Vectors in Exactly Solvable Models

Through two examples: the Friedrichs model and a particular case of central potential scattering, we illustrate the way of constructing Gamow vectors.     

Variety of LaSrMnO structures induced by growth conditions and laser irradiation

Crystallographic phase transitions in perovskite-like LaSrMnO metallic oxides are studied. The transitions are induced when internal stresses generated during film synthesis (at temperatures between 450 and 730°C) vary (decrease or increase) upon subsequent irradiation by a KrF laser emitting in the UV range. As the synthesis temperature T _s grows, the rhombohedral-to-orthorhombic phase transition occurs at 650–670°C. The resistivity is shown to be either temperature-independent, ρ(T)=const, at T<T _crit, or varies and reaches a maximum, ρ(T)=ρ_max, at the Curie temperature T _c. Optical transmission spectra taken at photon energies ℏω=0.5–2.5 eV exhibit both a high (0.8–0.9) and low (0.1–0.3) transmission coefficient t, depending on the synthesis temperature. As follows from X-ray diffraction data, the laser irradiation causes a phase transition only in LaSrMnO films grown at T _s<650°C. Phases of different size scales appear: the long-range-order orthorhombic matrix and mesoscopic-range-order rhombohedral clusters are observed in the films grown at T _s=450–550°C and the rhombohedral matrix with orthorhombic clusters, in the films grown at T _s=550–650°C.     

Many body effects and internal transitions of confined excitons in GaAs and CdTe quantum wells

Many body effects contribute significantly to the energy states of electron-hole pairs confined in quantum wells in the presence of excess electrons. We present results of optically detected resonance spectroscopy of the internal transitions of photo-excited electron-hole pairs in the presence of excess electrons for GaAs QWs and CdTe QWs. Compared to the case of isolated negatively charged excitons, excess electrons produce a large blue shift of the internal transitions in modulation-doped GaAs quantum wells (QWs) for filling factor <2, and similar effects are found in CdTe QWs. For filling factor >2 no internal transitions are observed. These measurements demonstrate the strong effects of electron-electron correlations on the internal transitions of charged excitons in these quasi-2D systems and the importance of magnetic translation invariance. In the presence of excess electrons, the observed internal transitions are those of a magnetoplasmon bound to a mobile valence band hole.     

Lattice parameter and luminescence properties of europium activated yttrium oxide

Samples of yttrium oxide doped with trivalent europium have been prepared by ceramic techniques, under different synthesis conditions; barium chloride (BaCl₂) and sodium tetraborate (Na₂B₄O₇) were tested as flux. The improvement of luminescence properties in dependence on substitution of Eu³⁺ for Y³⁺ in the host lattice, under electron and UV excitations is demonstrated. The lattice parameter as a quantitative assessment of activator incorporation degree is proposed. The obtained results are discussed with respect to the employed processing method.     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Shape Optimization and Fictitious Domain Approach for Solving Free Boundary Problems of Bernoulli Type

This contribution deals with an efficient method for the numerical realization of the exterior and interior Bernoulli free boundary problems. It is based on a shape optimization approach. The state problems are solved by a fictitious domain solver using boundary Lagrange multipliers.     

Improved bounds for some nonstandard problems in generalized heat conduction

We consider the Maxwell-Cattaneo system of equations for generalized heat conduction where the temperature and heat flux satisfy a nonstandard auxiliary condition which prescribes a combination of their values initially and at a later time. We obtain L₂ bounds for the temperature and heat flux by means of Lagrange identities. These bounds extend the range of validity for the parameter in the nonstandard condition under a constraint on the coefficients in the differential equations.