A Simple Derivation of Josephson's Formulae in Superconductivity

A simple and general derivation of Josephson's formulae for the tunneling currents is presented on the basis of Sewell's general formulation of superconductivity in relation to off-diagonal long-range order (ODLRO).     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000     

Alternative molecularly imprinted polymeric membranes from a tetrapeptide residue consisting of D- or L-amino acids

Alternative molecularly imprinted polymeric membranes were prepared from a polystyrene resin bearing tetrapeptides consisting of D -amino acids or L-amino acids. The membrane prepared from a DLDE derivative (H-Asp(OcHex)-Leu-Asp(OcHex)-Glu(OBzl) CH₂ ) consisting of D -amino acids and imprinted by Boc-D -Trp recognizes the D-isomer in preference to the corresponding L -isomer and vice versa. The amino acid preferentially adsorbed by the membrane was selectively permeated by applying electrodialysis.     

Growth and properties of air-processed GdBa2Cu3O7−δ superconductors with fined Gd2BaCuO5 and Gd2Ba4CuFeOy additions

We have succeeded in synthesizing a powder form of Gd₂Ba₄CuFeO_y (Gd2411) in air. GdBa₂Cu₃O_7−δ (Gd123)/Gd₂BaCuO₅ (Gd211) precursor powders added with different amounts of Gd₂Ba₄CuFeO_y (x = 0, 0.002, 0.004, 0.02) in molar ratio to Gd123 have been fabricated successfully into the form of large, single grains by the top seeded melt growth (TSMG) process. The relation between the additions amounts of Gd2411/Gd211 and critical current density (J_C) was analyzed. We found Gd2411 particles stably exist in the Gd123 matrix without degradation of superconducting properties owing to the existence of the Fe magnetic ion. The trapped field was observed to increase significantly compared with the bulk without Gd2411 additions.     

Adaptive exponential approximation of optical density ratio using third-order regression equations for depth profiling of a blood inclusion in a skin tissue model

We propose the use of the third-order multiple regression equations in approximating an optical density ratio with an adaptive exponential function for measuring depth and thickness of a blood inclusion embedded in a skin tissue model. To ensure accuracy of the exponential approximation, we investigated numerically various relations of optical density ratios versus depth and thickness, on the basis of Monte Carlo simulations for a layered skin tissue model. The third-order multiple regression analysis based on the relations above was used to derive regression equations for the determination of depth and thickness. Experiments with skin tissue phantoms were used to assess this approach.     

Synthesis, cyclic voltammetry, and UV–Vis studies of ferrocene-dithiafulvalenes as anticipated electron-donor materials

Abstract  

New ferrocenyl ketones were obtained as precursors of novel π-conjugated ferrocene-dithiafulvalene (Fc-DTF) and π-extended-ferrocenedithia-fulvalenes (π-exFc-DTF) as electron-donor conducting materials from ferrocene by a direct aroylation process using the Friedel–Crafts reaction. Novel Fc-DTF conjugates were synthesized using the Wittig–Horner reaction and their structures were determined. The redox behavior of the ferrocenyl carbonyl compounds Fc-DTF and Fc-π-exDTF was investigated in comparison to the parent ferrocene by means of cyclic voltammetry. A one-electron redox behavior was observed for carbonylferrocenes as one wave potential, while a two-electron process was observed as two oxidation waves for the conjugates. Introduction of electron-withdrawing groups led to increasing E _pa values and decreasing ΔE _p values. The UV–Vis spectra of some compounds were studied in comparison with ferrocene. The absorption spectra showed a red-shift with a slight increase in the absorption intensities.     

Effect of the moisture content in aerosol on the spray performance of Stmerin D HFA preparations

Stmerin D, a pressurized metered dose inhaler (MDI) for treatment of asthma, contains CFCs (chlorofluorocarbons) as a propellant. For the CFC replacement study, two formulations were prepared using hydrofluoroalkanes (HFA-134a and HFA-227) and the effect of storage on the spray performance was investigated under accelerated stress conditions. Drug stability, moisture content and spray performances such as the emitted dose uniformity and aerodynamic particle size distribution were evaluated. Drug content did not change after 3 months storage at 40 degrees C/75% RH. However, the emitted dose uniformity varied and the respirable fraction (RF) was reduced remarkably. While stored at 40 degrees C/ambient for 3 months, no change was observed in either drug content or spray performances. This study clarified that the moisture content in the canister played an important role on the spray performance, and it changed not only the emitted dose uniformity but also the particle size distribution. Consequently, in order to improve the stability of the spray performance of aerosol prepared with HFAs, moisture permeation into the canister must be controlled.     

Mass selective ejection by axial resonant excitation from a linear ion trap

We describe a new mass selective ejection method from a linear ion trap, which we call axial resonant excitation (AREX). A set of vane lenses are inserted between each quadrupole rod to produce electrostatic potential that is approximately harmonic along the central axis of the quadrupole field. After ions with specific m/z are resonantly oscillated in the axial direction, the ions are mass selectively ejected in the axial direction. At a high scan rate of 11 Th/ms, AREX achieved a high ejection efficiency of more than 60%, which is more than three times higher than a conventional mass selective axial ejection method from a linear trap using fringing field.     

Effect of ultrasonic irradiation on nucleation phenomena in a Na2HPO4.12H2O melt being used as a heat storage material

The effect of ultrasound on nucleation phenomena in the heat storage material Na2HPO4.12H2O was investigated by determining the primary nucleation probability and induction time, and by looking at heat generation phenomena in the initial stage of nucleation. The experimental results show that the primary nucleation probability dramatically increased, and the induction time decreased under the ultrasound irradiation, and in addition, the rate of temperature rise was dependent upon the ultrasonic output. Based on these results and the theoretical relationship between the number of primary nuclei and the heat generation rate, it is proposed that the number of primary nuclei depends upon the ultrasonic output.