Performance gain of displacement receiver with optimized prior probability

We numerically study the performance of the displacement based quantum receiver for the discrimination of weak 3- and 4-phase-shift keyed (PSK) coherent state signals. We show that due to the nontrivial asymmetry of the receiver structure, optimization of the prior probability increases the mutual information and achieves sub-shot-noise limit discrimination. Moreover, we estimate the cutoff rate for a 4-PSK signal and confirm that the prior probability optimization shortens the code length for a given decoding error criterion. Such consideration for the asymmetric channel matrix is essential in a study of the compassable quantum receiver.     

A new periodic pattern with five‐neighbored domain packing from ABC triblock terpolymer/B homopolymer blend

Self‐assembled structures from poly(isoprene‐b‐styrene‐b‐2‐vinylpyridine)(ISP)/styrene homopolymer blend were investigated. Five terpolymers whose total molecular weight, M, is in the narrow range of 121k < M < 214k, and volume fractions of the center block polystyrenes, ?_S, are similar at around 0.55, were prepared as parent block terpolymers. Their ?_P/?_I ratios, used as an indicator of asymmetry, are varied in the range 0.32 < ?_P/?_I < 2.46. Three low‐molecular weight styrene homopolymers with molecular weights of 3k, 9k, and 12k, respectively, were mixed with those block terpolymers to produce blends with almost constant styrene content within the range 0.65 < ?_S < 0.68. Both ISP/S(3k) and ISP/S(12k) blend series show a morphological transition from tetragonally packed cylinders (TPC) to double hexagonal structure (DHS) with hexagonally arrayed polyisoprene cylinders, each surrounded by six thin cylinders as satellites. If one focuses on ISP‐III(150k)/S blends whose ?_P/?_I is 0.88, TPC for ISP‐III/S(3k) was transformed to DHS for ISP‐III/S(12k), evidently due to the molecular weight effect of the added homopolymer. Finally a new periodic pattern, having P cylinders surrounded by five I cylinders each, has been discovered from ISP‐III/S(9k) at overall composition of ?_I/?_S/?_P = 0.17/0.68/0.15 and polystyrene block/styrene homopolymer ratio of w_S(b)/w_S(h) = 1.4. This structure was confirmed to possess hexagonal symmetry with larger unit cell than regular patterns ever known by X‐ray diffraction experiment. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 907–911     

Less than 10 defects/cm·μm in molecular beam epitaxy grown GaAs by arsenic cracking

Drastic reduction of irregular defect density in molecular beam epitaxy (MBE) grown GaAs is obtained by using a novel arsenic Knudsen effusion cell with a cracking furnace. A surface defect density of less than 10 cm⁻² is routinely achieved for continuously grown three 3-inch diameter, 1.7 μm thick, metal-semiconductor-field effect transistor (MESFET) structures when the cracking is carried out at about 700°C, which is the critical temperature for the conduction type change, and with the group III Knudsen cell only heated near the orifice of the crucible (top heat cell). These optimized cracking conditions also lead to successful mass production of some microwave devices with not only ultra-low defect density but suitable electrical performances.     

3,3-Dimethoxypropylsulfonyl Group: A new versatile protecting and activating group for amine synthesis

3,3-Dimethoxypropylsulfonyl (Dimps) chloride was prepared and used as a new versatile sulfonating agent for ammonia, primary and secondary amines to afford corresponding Dimps-amides in excellent yields. The resulting N-nonsubstituted and N-monosubstituted Dimps-amides, activated amines, were alkylated satisfactorily under new Mitsunobu conditions. The Dimps group was removed by treatment in aqueous solution under acidic followed by basic conditions. Furthermore, epilachnene, the defensive droplets from the Mexican bean beetle, Epilachna varivestis, was synthesized utilizing this Dimps methodology in short steps.     

Nanomechanical properties of reversed surfactant bilayers formed in micrometre-sized holes

Nanomechanical properties of free-standing reversed surfactant bilayers, dried foam films (DFFs), were examined via AFM by fitting local force-indentation curves with a Hertzian model. The Young's moduli of four kinds of bilayers were in a range of 10-30 MPa.     

New layered rare-earth hydroxides with anion-exchange properties

We report the synthesis of a new series of layered hydroxides based on rare-earth elements with a composition of RE(OH)2.5Cl(0.5).0.8 H2O (RE: Eu, Tb, etc.) through the homogeneous precipitation of RECl3.x H2O with hexamethylenetetramine (HMT). Rietveld analysis combined with direct methods revealed an orthorhombic layered structure comprising a positively charged layer of [RE(OH)2.5-(H2O)0.8]0.5+ and interlayer Cl- ions. The Cl- ions were readily exchangeable for various anions (NO3-, SO4(2-), dodecylsulfonate, etc.) at ambient temperature. Photoluminescence studies showed that the compounds display typical RE3+ emission. With rare-earth-based host layers and tunable interlayer guests, the new compounds may be of interest for optoelectronic, magnetic, catalytic, and biomedical materials.     

Structural disorder and diffusional pathway of oxide ions in a doped Pr2NiO4-based mixed conductor

MEM nuclear density analysis from neutron diffraction data measured in situ at 1015.6 degrees C has indicated the two-dimensional network of curved O2-O3-O2 oxide-ion diffusion paths on the (Pr,La)-O layer in a K2NiF4-type structured oxide-ionic and electronic mixed conductor (Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+delta.     

General method for ultrathin free-standing films of nanofibrous composite materials

A simple and general method for the preparation of ultrathin, large-area, free-standing films of nanofibrous composite materials was developed. First, positively charged cadmium hydroxide nanostrands of 1.9 nm in diameter and micrometers in length were prepared by mixing dilute aqueous solutions of cadmium chloride and aminoethanol. Negatively charged dye molecules, proteins, nanoparticles, and water-soluble fullerene or carbon nanotubes were mixed with the nanostrands to give a well-dispersed solution of the corresponding nanofibrous composites. After filtration of the dispersions with a polycarbonate membrane filter, uniform films with a thickness of a few tens to hundreds of nanometers and a diameter of a few centimeters were obtained. The films were readily peeled off from the membrane filter by immersion in ethanol. The resultant free-standing films could be further transferred to other substrates, such as quartz plate, gold electrode, and porous alumina membrane, and were characterized by scanning and transmission electron microscopies. We provide herein various nanofibrous free-standing films with optical, biological, metallic, and magnetic properties.     

Spontaneous coating of carbon nanotubes with an ultrathin polypyrrole layer

A novel protocol for precisely coating individual multiwall carbon nanotubes (MWCNTs) with an ultrathin layer of polypyrrole was developed. The nanocoated MWCNTs were successfully prepared by in situ chemical deposition of polypyrrole in an aqueous suspension of MWCNTs. The coating layer was very uniform and the thickness of the layer was determined by controlling the monomer concentration used, which gave nanometer precision. The products were characterized by transmission electron microscopy, scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, electron energy loss spectroscopy, and conductivity and current-voltage measurements. The ultrathin polypyrrole layer could electrically insulate individual MWCNTs.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.