Redetermination of sperminium tetrachloride

In the title compound, 1,5,10,14‐tetraazoniatetra­decane tetrachloride, C₁₀H₃₀N₄⁴⁺·4Cl⁻, the sperminium tetracation lies on a centre of symmetry. The two central C—N—C—C torsion angles are gauche and of opposite signs, and all the other torsion angles are trans. All NH groups participate in the three‐dimensional hydrogen‐bond network, which is additionally strengthened by C—H⋯Cl interactions.     

Crystal structure of m-nitrobenzoic anhydride

The title compound (C₁₄H₈N₂O₇,M _r =306.2) crystallizes in the orthorhombic space group Pbca witha=6.962(1).b=24.688(1), andc=15.890(1)Å,V=2731.0 ų,D _x =1.489 g·cm^–3 forZ=8,=0.98 mm^–1,F(000)=1296,T=293 K. FinalR=0.053 for 1873 observed reflections. The structure was solved by direct methods. Approximately planar molecules lie perpendicular to the [100] direction and show partial stacking. The structure is the first example of a symmetric anhydride which does not retain the symmetry in the crystal state. The two independent nitro groups twist out of the ring planes by 10.5 and 14.8°, respectively.     

Surface Studies on Glass Powders Used in Commercial Glass-Ionomer Dental Cements

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42–2.73 m²/g and 0.0029 to 0.0083 cm³/g, respectively, whereas densities were in the range 2.6428–2.8362 g/cm³. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces.     

Oligocarbazoles as ligands for lead-selective liquid membrane electrodes.

Oligocarbazoles have been applied as new ionophores in liquid membrane electrodes (ISEs) destined for lead(II) determination in water samples. The oligocarbazole-containing ISEs demonstrated a close-to-Nernstian potentiometric response towards Pb2+ in the activity range 10(-7)-10(-2) M. The selectivity coefficients measured by the matched potential method (MPM) confirmed their good selectivity against common interfering mono- and doubly charged cations. The oligocarbazole-containing ISEs do not respond towards protons. Their applicability has been checked by performing the recovery test while using a sample of wastewater.     

The effect of solvent on the reactions of allyltin (IV) compounds with singlet oxygen, 4-phenyl-1,2,4-triazoline-3,5-dione and diethyl azodicarboxylate

The effect of the influence on the increase of polarity of the solvent on the selectivity and rate of metalloene reactions of different allyltin compounds with singlet oxygen, 4-phenyl-1,2,4-triazoline-3,5-dione (TD) and diethyl azodicarboxylate has been studied.     

Synthesis of Epoxy Methacrylate Resin and Coatings Preparation by Cationic and Radical Photocrosslinking

This work involves the synthesis of hybrid oligomers based on the epoxy methacrylate resin. The EA resin was obtained by the modification of industrial-grade bisphenol A-based epoxy resin and methacrylic acid has been synthesized in order to develop multifunctional resins comprising both epoxide group and reactive, terminal unsaturation. Owing to the presence of both epoxy and double carbon–carbon pendant groups, the reaction product exhibits photocrosslinking via two distinct mechanisms: (i) cationic ring-opening polymerization and (ii) free radical polymerization. Monitoring of EA synthesis reactions over time using PAVs, MAAC and NV parameters, and the FT-IR method reveals that esterification reactions proceed faster at the start, exhibiting over 40% of conversion within the initial 60 min, which can be associated with a relatively high concentration of reactive sites and low viscosity of the reaction mixture at the initial reaction stage. With the further increase in the reaction time, the reaction rate tends to decrease. The control of the EA synthesis process can guide how to adjust reactions to obtain EAs with desired characteristics. Based on obtained values, one can state that the optimum synthesis time of about 4–5 h should be adopted to prepare EAs having both epoxy groups and unsaturated double bonds. The structure of the obtained EA was confirmed by FT-IR and NMR methods, as well as the determination of partial acid value and epoxy equivalent. Samples at various stages of synthesis were cured with UV radiation in order to study the kinetics of the process according to cationic and radical polymerization determined via photo-differential scanning calorimetry (photo-DSC) and real-time infrared spectroscopy (RT-IR) and then the properties of the cured coatings were tested. It turned out that the cationic polymerization was slower with a lower conversion of the photoreactive groups, as compared to the radical polymerization. All the obtained EA coatings were characterized by good properties of cured coatings and can be successfully used in the coating-forming sector.     

Gel Polymer Electrolytes with Talc as a Natural Mineral Filler and a Biodegradable Polymer Matrix in Sodium-Ion Batteries

A gel polymer electrolyte based on poly(vinyl alcohol) (PVA) is used in sodium-ion batteries (SIBs). The use of biodegradable and water-soluble polymer potentially reduces the negative environmental impact. The other components include sodium salt (NaPF₆), sulfolane (TMS) as a plasticizer and talc. For the first time, natural and abundant talc has been used as an inert filler in a gel polymer electrolyte. The best results were obtained for moderate amounts of filler (1 and 3 wt%). Then, an increase in the conductivity, transference numbers, and thermal stability of the membranes was observed. Moreover, the presence of talc had a positive effect on the cyclability of the hard carbon electrode. The discharge capacity after 50 cycles of HC|1 % T_TMS|Na and HC|3 % T_TMS|Na was 243 and 225 mAh g⁻¹, respectively. The use of talc in gel polymer electrolytes containing sodium ions improves the safety and efficiency of SIBs.     

Permeability of the Perindopril Arginine under In Vitro Conditions across Caco-2 Monolayer and Biomimetic Phospholipid Membrane

Perindopril arginine (PA) as an angiotensin-converting enzyme (ACE) inhibitor is widely used in cardiovascular diseases, especially in systemic hypertension and heart failure. Although the pharmacokinetics of PA are well documented, there is no available detailed data on its permeation in in vitro conditions. The present study aimed to assess the transport of PA across both biological membranes and artificial biomimetic ones. For the determination of PA transport, the Caco-2 cell line was selected as a reliable in vitro model of gastrointestinal biological barriers. Additionally, a novel 96-well plate with phospholipid membrane PermeaPad was used to evaluate the transport of PA by passive diffusion. We confirmed that PA is relatively poorly permeable across the Caco-2 monolayer. The permeability results obtained from the non-cell-based model demonstrated higher transport of PA as compared to that of Caco-2. Thus, PA transport across the biological membranes might be suggested to be regulated by the membrane transporters.