Chemical Composition and Biological Activity of Argentinian Propolis of Four Species of Stingless Bees

The chemical composition of propolis of four species of stingless bees (SLBs) from Argentina was determined, and its antibacterial and anticancer activity was evaluated on selected types of microbes and cancer cell lines. Volatile secretions of all propolis samples are formed by 174 C₂–C₁₅ organic compounds, mainly mono- and sesquiterpenes and their derivatives. The chromatograms of ether extracts showed 287 peaks, of which 210 were identified. The most representative groups in the extracts of various propolis samples were diterpenoids (mainly resin acids), triterpenoids and phenolic compounds: long-chain alkenyl phenols, resorcinols and salicylates. The composition of both volatile and extractive compounds turned out to be species-specific; however, in both cases, the pairwise similarity of the propolis of Scaptotrigona postica and Tetragonisca fiebrigi versus that of Tetragona clavipes and Melipona quadrifasciata quadrifasciata was observed, which indicated the similarity of the preferences of the respective species when choosing plant sources of resin. The composition of the studied extracts completely lacked flavonoids and phenolcarboxylic acids, which are usually associated with the biological activity and medicinal properties of propolis. However, tests on selected microbial species and cancer cell lines showed such activity. All propolis samples tested against Paenibacillus larvae, two species of Bacillus and E. coli showed biofilm inhibition unrelated to the inhibition of bacterial growth, leading to a decrease in their pathogenicity. Testing the anticancer activity of ether extracts using five types of cell cultures showed that all four types of propolis studied inhibit the growth of cancer cells in a dose- and time-dependent manner. Propolis harvested by T. clavipes demonstrated the highest cytotoxicity on all tested cell lines.     

Soluble Extracellular Polymeric Substances Produced by Parachlorella kessleri and Chlorella vulgaris: Biochemical Characterization and Assessment of Their Cadmium and Lead Sorption Abilities

In the present study, the potential of lead and cadmium removal by the extracellular polymeric substances (EPS) produced from Parachlorella kessleri and Chlorella vulgaris were investigated. Carbohydrates were the dominant components of EPS from both analyzed species. The contents of reducing sugars, uronic acids, and amino acids were higher in EPS synthesized by C. vulgaris than in EPS from P. kessleri. The analysis of the monosaccharide composition showed the presence of rhamnose, mannose and galactose in the EPS obtained from both species. The ICP-OES (inductively coupled plasma optical emission spectrometry) analyses demonstrated that C. vulgaris EPS showed higher sorption capacity in comparison to P. kessleri EPS. The sorption capacity of C. vulgaris EPS increased with the increase in the amount of metal ions. P. kessleri EPS had a maximum sorption capacity in the presence of 100 mg/L of metal ions. The FTIR analysis demonstrated that the carboxyl, hydroxyl, and carbonyl groups of EPS play a key role in the interactions with metal ions. The present study showed C. vulgaris EPS can be used as a biosorbent in bioremediation processes due to its biochemical composition, the presence of significant amounts of negatively charged uronic acids, and higher sorption capacity.     

Modulating Properties of Piroxicam,Meloxicam and Oxicam Analogues against Macrophage-Associated Chemokines in Colorectal Cancer

The mechanisms underlying the antineoplastic effects of oxicams have not been fully elucidated. We aimed to assess the effect of classic and novel oxicams on the expression/secretion of macrophage-associated chemokines (RTqPCR/Luminex xMAP) in colorectal adenocarcinoma cells, and on the expression of upstream the non-steroidal anti-inflammatory drug (NSAID)-activated genes NAG1, NFKBIA, MYD88, and RELA, as well as at the chemokine profiling in colorectal tumors. Meloxicam downregulated CCL4 9.9-fold, but otherwise the classic oxicams had a negligible/non-significant effect. Novel analogues with a thiazine ring substituted with arylpiperazine and benzoyl moieties significantly modulated chemokine expression to varying degree, upregulated NAG1 and NFKBIA, and downregulated MYD88. They inhibited CCL3 and CCL4, and their effect on CCL2 and CXCL2 depended on the dose and exposure. The propylene linker between thiazine and piperazine nitrogens and one arylpiperazine fluorine substituent characterized the most effective analogue. Only CCL19 and CXCL2 were not upregulated in tumors, nor was CXCL2 in tumor-adjacent tissue compared to normal mucosa. Compared to adjacent tissue, CCL4 and CXCL2 were upregulated, while CCL2, CCL8, and CCL19 were downregulated in tumors. Tumor CCL2 and CCL7 increased along with advancing T and CCL3, and CCL4 along with the N stage. The introduction of arylpiperazine and benzoyl moieties into the oxicam scaffold yields effective modulators of chemokine expression, which act by upregulating NAG1 and interfering with NF-κB signaling.     

Phytochemical and Biological Activity Studies on Nasturtium officinale (Watercress) Microshoot Cultures Grown in RITA® Temporary Immersion Systems

The main compounds in both extracts were gluconasturtiin, 4-methoxyglucobrassicin and rutoside, the amounts of which were, respectively, determined as 182.93, 58.86 and 23.24 mg/100 g dry weight (DW) in biomass extracts and 640.94, 23.47 and 7.20 mg/100 g DW in plant herb extracts. The antioxidant potential of all the studied extracts evaluated using CUPRAC (CUPric Reducing Antioxidant Activity), FRAP (Ferric Reducing Ability of Plasma), and DPPH (1,1-diphenyl-2-picrylhydrazyl) assays was comparable. The anti-inflammatory activity of the extracts was tested based on the inhibition of 15-lipoxygenase, cyclooxygenase-1, cyclooxygenase-2 (COX-2), and phospholipase A₂. The results demonstrate significantly higher inhibition of COX-2 for in vitro cultured biomass compared with the herb extracts (75.4 and 41.1%, respectively). Moreover, all the studied extracts showed almost similar antibacterial and antifungal potential. Based on these findings, and due to the fact that the growth of in vitro microshoots is independent of environmental conditions and unaffected by environmental pollution, we propose that biomass that can be rapidly grown in RITA^® bioreactors can serve as an alternative source of bioactive compounds with valuable biological properties.     

The synthesis, structure and properties of N-acetylated derivatives of ethyl 3-amino-1H-pyrazole-4-carboxylate

Ethyl 3-amino-1H-pyrazole-4-carboxylate (1) was yielded through total synthesis and reacted with acetic anhydride to give the acetylated products 2-6. Compounds 1-6 were studied with HPLC, X-ray, FT-IR, (1)H-NMR, (13)C-NMR and MS. Acetylation was carried out in solvents of various polarity, namely; chloroform; dioxane; DMF; acetic anhydride, at room temperature and at boiling points; and in the presence and absence of DMAP. The acetylated products are mainly nitrogen atoms in the ring. The position of the ring proton in the solution was based on NOESY; multinuclear HMBC, HSQC spectra and calculations. For equivalent amounts (1-1.5 mol) of acetic anhydride at room temperature two products of monoacetylation are produced in the ring: 2 and 3, ca. 2 : 1 and at the same time only small amount of the third product of monoacetylated, 5 in DMF, as well the product diacetylated, 4. The greatest amount of the product 4 is produced during the reaction with chloroform. However, in this solvent and in dioxane no product 5 is produced. Compound 2 is, largely, formed in dimethylformamide, in the presence DMAP, 0.2 eq. In the presence of this catalytic base, for the first hour, there is a mixture 2 and 3 to the ratio ca. 95 : 5. With 8 eq of Ac(2)O at reflux, after another hour, the compounds 3, 4 and 6 appear about equal amounts. After a longer time, the compound, which appears most in this mixture is triacetylated derivative 6. The structural and spectroscopic characteristics of compounds 1-6 have been given and the methods for their preparation have been provided.     

Glycosylation of organic phosphorus thio- and selenoacids—II: The reaction of organic phosphorus thioselenoacids with glycosyl bromides under kinetically and thermodynamically controlled conditions

Ambident anions derived from phosphorus thioselcnoacids were glycosylated with 2,3,4,6 - tetra - O - acetyl - α - d - glucopyranosyl bromide, 2,3,4,6 - tetra - O - acetyl - α - d - galactopyranosyl bromide and 2,3,4 - tri- O - acetyl - α - d - xylopyranosyl bromide. The products were β-Se-glucosyl- and β-S-glucosylthioselenoates. The Se/S ratio of the glycosylated phosphorothioselenoates depends on the reaction conditions. At higher temperatures an equilibrium was observed. As a result of this equilibrium the Se/S ratio of the linkages formed in the glycosylated products was different from that observed under kinetic control. The structures of the glycosylated phosphorothioselenoates were confirmed by spectroscopy, independent synthesis and selective oxidation.     

Glycosylation of organic thio- and selenoacids of phosphorus : The reaction of organic monothio acids of phosphorus with glycosyl bromides. Thiono-thiolo rearrangement of glycosyl phosphorothioates

Ambident anions derived from phosphorus monothio acids have been glycosylated by 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosyl-, 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosyl- and 2,3,4-tri-acetyl-α-D-xylopyranosyl bromides, yielding β-S-glycosyl- and /gb-O-glycosylthioates. The S/O ratio of the glycosylated phosphorothioates depends markedly on the salt used. Ammonium salts favour the formation of S-derivatives, whereas silver salts give mainly O-derivatives. O-Glucosyl phosphorothioate undergoes thermal isomerisation to S-glucosyl phosphorothioate, with retention of configuration at the glycosylic centre. The implications of this stereochemical result are briefly discussed.     

Computing the noncentral gamma distribution, its inverse and the noncentrality parameter

The noncentral gamma distribution can be viewed as a generalization of the noncentral chi-squared distribution and it can be expressed as a mixture of a Poisson density function with a incomplete gamma function. The noncentral gamma distribution is not available in free conventional statistical programs. This paper aimed to propose an algorithm for the noncentral gamma by combining the method originally proposed by Benton and Krishnamoorthy (Comput Stat Data Anal 43(2):249–267, 2003) for the noncentral distributions with the method of inversion of the distribution function with respect to the noncentrality parameter using Newton–Raphson. The algorithms are available in pseudocode and implemented as R functions. To evaluate the accuracy and speed of computation of the algorithms implemented in R, results of the distribution function, density function, quantiles and noncentrality parameter of the noncentral incomplete gamma and its particular case, the noncentral chi-squared, were obtained for the arguments settings used by Benton and Krishnamoorthy (Comput Stat Data Anal 43(2):249–267, 2003) and Chen (J Stat Comput Simul 75(10):813–829, 2005). The implemented routines performed well and, in general, were as accurate than other approximations. The R package denoted ncg is available to download on the CRAN-R package repository http://cran.r-project.org/.     

Impedance studies on polyacrylonitrile–CuX2–DMSO (X=Cl, Br, CF3SO3) solid polymer electrolyte

A series of polyacrylonitrile–dimethylsulfoxide–CuX₂ (X=CF₃SO₃⁻, Cl⁻, Br⁻), films (foils) were prepared by means of the solution cast technique. The thickness of the foils was between 0.04 and 0.09 cm and they contained 70–80 wt.% of the solvent. Conductivities of the solid electrolytes were obtained from impedance measurements. The conductivity increases with the increase of the salt content up to 8 wt.%; at higher concentrations (>8 wt.%) the conductivity is more or less stable, and reaches, in the case of Cu(CF₃SO₃)₂ and CuCl₂, the level of ca. 10⁻³ Ω⁻¹ cm⁻¹ at room temperature. The foils based on the CuBr₂ show even higher conductivity, close to 10⁻² Ω⁻¹ cm⁻¹ at room temperature, a value comparable to that characteristic for liquid solutions. The temperature variation of the conductivity for all the systems studied is of the Arrhenius type. The activation energy, determined from linear plots lnσ=f(T⁻¹), is of the order ca. 14 kJ mol⁻¹ for the PAN/CuBr₂/DMSO and of ca. 21 kJ mol⁻¹ for the PAN/CuCl₂/DMSO and the PAN/Cu(CF₃SO₃)₂/DMSO systems.