Photoinduced desorption of sulfur from gold nanoparticles loaded on metal oxide surfaces

We now report photoinduced sulfur desorption from the surfaces of Au nanoparticles loaded on metal oxides. This reaction occurs in water at ordinary temperature and pressure. Nanometer-sized Au particles have been formed on the surfaces of various metal oxides by deposition-precipitation (Au/oxides). Elemental sulfur (S8) is selectively adsorbed on the Au nanoparticle surfaces of Au/oxides in an atomic state at a coverage of (theta) 1/3. Irradiation (lambdaex > 300 nm) of the sulfur adsorbed Au/anatase TiO2 in water has led to reductive desorption of the sulfurs at room temperature. Electrochemical measurements using Au/oxides indicate that the driving force for this reaction is the photoinduced upward shift of Fermi energy of the metal oxide-supported Au nanoprticles. This study will open up a novel and wide application of heterogeneous photocatalysis for thermal catalysts.     

Aqueous Titanate Sols from Ti Alkoxide-α-Hydroxycarboxylic Acid System and Preparation of Titania Films from the Sols

Aqueous titanate sols were prepared by reactions of titanium tetraisopropoxide (TIP) with -hydroxycarboxylic acids in water. IR and Raman spectra, and elemental analyses of the precipitates obtained from the sols revealed that the carboxylates were chelated to titanium but the Ti species were polymerized to form a cluster that had a colloidal nature. Spin-coating of titania (TiO₂) thin films from these sols was also examined. Interestingly, it was found that (004) preferentially oriented anatase films with refractive index of 2.54 were obtained from TIP-lactic acid-NH₃ (1:1:1, molar ratio) aqueous sol. This crystallographic orientation was characteristic of the TIP-lactic acid-NH₃ (1:1:1) system, and was not affected by the kinds of substrates used and the heating rate of the film. TEM observation indicated that small anatase grains had already formed at 200°C. Therefore, the crystallographic orientation might depend strongly on the structure of the chemical species of the precursor solutions.     

Diastereoselective Iodocarbocyclization Reaction of 2- or 3-Oxy-4-pentenylmalonate Derivatives

1,2- Or 1,3-asymmetric induction in the iodocarbocyclization reaction of 4-pentenylmalonate derivatives having a stereogenic center at an allylic or a homoallylic position has been investigated. The iodocarbocyclization reactions of 3-oxy-4-pentenylmalonate derivatives proceeded with high cis-selectivity through stereoelectronic control of the oxygenated substituent at an allylic position. In the reaction of (S)-2-siloxy-4-pentenylmalonate, an excellent diastereoselectivity was achieved through the utilization of double stereodifferentiation with a chiral titanium catalyst. Furthermore, as an application of the present reaction, the asymmetric syntheses of cyclosarkomycin and a synthetic intermediate of brefeldin A from optically pure 2- and 3-oxy-4-pentenylmalonate derivatives are also described.     

A stannylene strategy for regioselective acylation and phosphorylation of 1,2-cyclohexylidene-myo-inositol. Its convenient resolution and phosphatidylinositol synthesis

The bis(dibutylstannylene) derivative of 1,2-cyclohexylidene-myo-inositol reacted with (S)-O-acetylmandeloyl chloride and diphosphate tetraesters to give 3,6-dimandelate and 3-phosphate, respectively. Using the stannylene methodology for the optical resolution and regioselective phosphorylation of the ketal, a concise synthesis of phosphatidylinositol with the natural configuration was accomplished.     

Unambiguous Determination of the Absolute Configurations of Acetylene Alcohols by Combination of the Sonogashira Reaction and the CD Exciton Chirality Method – Exciton Coupling between Phenylacetylene and Benzoate Chromophores

The CD exciton chirality method was applied to various phenylacetylene alcohols to determine their absolute configurations; the long axis polarized –^* transition (_max=252nm) of the 4-methoxyphenylacetylene chromophore couples with the transition (_max=257nm) of the 4-methoxybenzoate group to generate intense exciton split CD Cotton effects, from the signs of which the absolute configurations of phenylacetylene alcohols were unambiguously determined. As an extension of the results, a new methodology for determining the absolute configurations of acetylene alcohols having the HCCCH(OH)-moiety by combination of the Sonogashira reaction and the CD exciton chirality method has been developed and applied. Since the –^* transition of acetylene triple bond is located below 180nm, it is difficult to observe ideal bisignate CD Cotton effects due to the exciton coupling between acetylene and benzoate chromophores. To observe the ideal exciton split Cotton effects necessary for the unambiguous determination of absolute configuration, the terminal acetylene group was converted, by the Sonogashira reaction, to the 4-methoxyphenylacetylene moiety, which exhibits an intense –^* absorption band polarized along the long axis of the chromophore at 252nm. As a partner of exciton coupling, 4-methoxybenzoate showing a –^* band at 257nm was introduced into the alcohol moiety, and the benzoates formed showed intense bisignate CD Cotton effects, from the signs of which the absolute configurations of original acetylene alcohols could be determined in an unambiguous manner.     

Interaction between amphiphiles and water molecules in concentrated bilayer aqueous colloids

Interaction between amphiphiles and water molecules in micelle or bilayer structure has been investigated using aqueous colloids of various amphiphiles through the rheological data and the spin-lattice relaxation timeT ₁ of the proton of water molecule.T ₁ of the water proton has been measured by the inversion recovery method and determined as a single exponential relaxation process.The chemical shift of the water proton is almost independent of the amphiphilic concentration; however, it shifts toward a higher magnetic field with increasing temperature in a way similar to that in pure water and in the amphiphilic aqueous systems. These facts mean that there is no significant difference in the magnetic field environment of the water protons in these systems.The water molecule is not necessarily bound in the fully developed micelle or bilayer (rod-like or lamella) structure which induces the high viscosity or high rigidity of the colloidal system. On the other hand, the water molecule is bound in the micelle colloids of amphoteric amphiphiles or amphiphiles whose molecular assembly creates a relatively strong electrostatic field. The activation entropy of the bound water is negative and this suggests that water molecules assume some ordered structure in the bound state.     

Solvent extraction of the ion-pairs of chromium(VI) and molybdenum(VI) with trioctylmethylammonium chloride and benzyldimethylcetylammonium chloride

The number of capriquat molecules per chromium(VI) atom in the chromate-capriquat ion-association complex has been found to be between one and two. The distribution ratio in the extraction of chromium(VI) with capriquat is dependent on the dielectric constant of the organic solvent, with a minimum at a dielectric constant of about 8. The absorption spectra of the ion-pair extracted into cyclohexane, carbon tetrachloride, benzene and n-butanol are very similar to that of chromate in aqueous solution. The absorption spectra of the chromium(VI)-capriquat extracts in these organic solvents gradually change to an absorption spectrum similar to that of HCrO(4)(-) in aqueous solution. Chromium(VI)-capriquat extracted into chloroform and 1,2-dichloroethane gives absorption spectra similar to that of HCrO(4)(-)in aqueous medium. The chromium(VI)-capriquat species extracted into 1,2-dichloroethane may be (Q(+))(2).CrO(4)(2-)(H(2)O)(n). In contrast, chromium(VI) is extracted with capriquat into the other organic solvents from ammoniacal medium as a mixture of (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).CrO(4)(2-)(H(2)O)(n). The spectral change is ascribed to the change of the extracted species from (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+)NH(4)(+).CrO(4)(-)(H(2)O)(n) to Q(+).HCrO(4)(2-)(H(2)O)(n-1). The chromium(VI)-zephiramine species extracted is formulated as (Q(+), NH(4)(+))(2)CrO(4)(2-)(H(2)O)(n).(Q(+).Cl(-))(m). Molybdenum(VI) is extracted with capriquat into the same organic solvents as a mixture of (Q(+))(2).MoO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).MoO(4)(2-).(H(2)O)(n).     

Electrochemical formation of stable ferrocene anion and the formal rate constant of the ferrocene0/− electrode

A reversible cyclic voltammogram for the one-electron reduction of ferrocene in 1,2-dimethoxyethane is recorded under experimental conditions that enable the ferrocene anion to exist for a few minutes. The formal rate constant of the ferrocene^0/? electrode, determined by cyclic voltammetry at ?45°C, ca. 10^?3 cm s^?1, is in striking contrast with that of ferrocene^+/0, > 10^?1 cm s^?1. The distortion of the ferrocene molecule caused by reduction may be a reason for this difference in electron-transfer rate.     

Application of preparative high-speed counter-current chromatography for separation of methyl gallate from Acer truncatum Bunge

Preparative separation of methyl gallate in leaves extract of Acer truncatum Bunge was conducted using high-speed counter-current chromatography (HSCCC) with a solvent system composed of ethyl acetate-ethanol-water at volume ratios of 5:1:5 (v/v/v). In a single operation, 57.5 mg of methyl gallate was obtained from 120 mg of the extract. HPLC analyses of the counter-current chromatography (CCC) fraction revealed that the methyl gallate was having over 97% purity. Its structure was identified by 1H NMR and 13C NMR.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.