Flow injection chemiluminescence determination of the total phenolics levels in plant-derived beverages using soluble manganese(IV)

This study established a flow injection (FI) methodology for the determination of the total phenolic content in plant-derived beverages based on soluble manganese(IV) chemiluminescence (CL) detection. It was found that mixing polyphenols with acidic soluble manganese(IV) in the presence of formaldehyde evoked chemiluminescence. Based on this finding, a new FI-CL method was developed for the estimation of the total content of phenolic compounds (expressed as milligrams of gallic acid equivalent per litre of drink) in a variety of wine, tea and fruit juice samples. The proposed method is sensitive with a detection limit of 0.02 ng mL⁻¹ (gallic acid), offers a wide linear dynamic range (0.5-400 ng mL⁻¹) and high sample throughput (247 samples h⁻¹). The relative standard deviation for 15 measurements was 3.8% for 2 ng mL⁻¹ and 0.45% for 10 ng mL⁻¹ of gallic acid. Analysis of 36 different samples showed that the results obtained by the proposed FI-CL method correlate highly with those obtained by spectrophotometric methods commonly used for the evaluation of the total phenolic/antioxidant level. However, the FI-CL method was found to be far simpler, more rapid and selective, with almost no interference from non-phenolic components of the samples examined.     

Fluoride-selective polymeric membrane electrodes based on Zr(IV)- and Al(III)-salen ionophores of various structures

Al(III)- and Zr(IV)-salophens of novel structures were tested as anion-selective ionophores. It was shown that these compounds are highly selective to fluoride and give selectivity greatly deviating from classical Hofmeister pattern, when doped into the polymeric membrane of ion-selective electrode (ISE). The following selectivity sequence has been recorded for both ionophores: F⁻ > ClO₄⁻ > SCN⁻ > NO₃⁻ ≈ Br⁻ ≈ Cl⁻. The results of potentiometric and spectrophotometric measurements allow to conclude that the nature and structure of salophen ligands influence stability of ISE working parameters. An increase in salophen ligands lipophilicity results in prolongation of the ISE lifetime, most likely due to slower ionophore decomposition caused by the hydrolysis of imine bonds in salophen structure. Ion-selective electrodes (ISEs) with the most successful Al(III)-salophen exhibited a stable, fast and near-Nernstian fluoride response and a functional lifetime near 3 weeks and selectivity coefficients with as follows: −2.8 (Y⁻ = Br⁻), −2.7 (Cl⁻), −2.8 (NO₃⁻), −1.5 (SCN⁻), −1.3 (ClO₄⁻), which is better than for other ones based on Zr(IV)- and Al(III)-salophens and salens described to date.     

Spectrochemical properties and solvatochromism of bis(salicylidene-2-amino-3-methylpyridine)copper(II)

The title complex, denoted as [Cu(Msap)₂], is a deep brown solid soluble in common solvents like chloroform, toluene, benzene, dioxane, acetone, methanol, ethanol, 2-propanol, dimethylformamide, dimethyl sulfoxide, and acetonitrile that is a necessary condition for solvatochromism observation. The complex has been characterized by elemental analysis, molar conductivity, ultraviolet, and visible spectroscopy. The available X-ray data for similar compounds show that copper atom adopts planar coordination geometry. The molar conductivities indicate their non-electrolytic properties. The electronic spectra have been used to study the coordination properties of donor atoms and their bonding abilities, as well as solvatochromism. The results obtained show that the interactions of metal with donors depend on solvent polarity and the color changes are subtle.     

Energy selective excision of CN- following electron attachment to hexafluoroacetone azine ((CF3)2C=N-N=C(CF3)2)

Low energy electron attachment (DEA) to hexafluoroacetone azine (HFAA) leads to a remarkable energy selective excision of CN(-) within a pronounced resonance located at 1.35 eV. The underlying dissociative electron attachment (DEA) reaction involves multiple bond cleavages and rearrangement within the neutral products. A series of further fragment ions (F(-), CF(3)(-), (CF(3))(2)C(-) and (CF(3))(2)CN(-)) are observed from resonant features above 2 eV and only (CF(3))(2)CN(-) is additionally formed within a narrow resonance below 1 eV. In contrast to CN(-) all the remaining fragment ions can be formed by simple bond cleavages with (CF(3))(2)CN(-) being the result of a symmetric decomposition of the target molecule by cleavage of the (N-N) bond with the excess charge localised on either of the identical fragments. Our ab initio calculations predict an adiabatic electron affinity of HFAA close to 2 eV with the geometry of the relaxed anion considerably distorted with respect to that of the neutral molecule.     

MSE with mass defect filtering for in vitro and in vivo metabolite identification

Metabolite identification studies involve the detection and structural characterization of the biotransformation products of drug candidates. These experiments are necessary throughout the drug discovery and development process. The use of high-resolution chromatography and high-resolution mass spectrometry together with data processing using mass defect filtering is described for in vitro and in vivo metabolite identification studies. Data collection was done using UPLC coupled with an orthogonal hybrid quadrupole time-of-flight mass spectrometer. This experimental approach enabled the use of MS(E) data collection (where E represents collision energy) which has previously been shown to be a powerful approach for metabolite identification studies. Post-acquisition processing with a prototype mass defect filtering program was used to eliminate endogenous interferences in the study samples, greatly enhancing the discovery of metabolites. The ease of this approach is illustrated by results showing the detection and structural characterization of metabolites in plasma from a preclinical rat pharmacokinetic study.     

X-ray structure and multinuclear NMR studies of platinum(II) and palladium(II) complexes with 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine

Pt(II) and Pd(II) dichloride complexes with 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine (dbtp) have been synthesized and characterized by infrared and ¹H, ¹³C NMR, ¹³C CPMAS spectroscopy. The structures of the cis-PtCl₂(dbtp)₂ · EtOH (1) and cis-PdCl₂(dbtp)(dmso) (2) has been determined by signal-crystal X-ray diffraction. In both complexes the X-ray crystal structures shows that heterocycle ligand (dbtp) binds the central atom monodentate via nitrogen atom N(3). In addition, compound (2) is interesting for its structural features, because it is the first report of mixed dichloride Pd(II) complexes with N-donor (triazolopyrimidine) and S-donor (dimethylsulfoxide) ligands. In this structure the Pd–Cl distances are: 2.302(1) and 2.281(1) Å, Pd–N 2.041(3) Å and Pd–S 2.245(1) Å. The ¹H, ¹³C NMR studies show clearly that these structures are retained in solution.     

On geometries of stacked and H-bonded nucleic acid base pairs determined at various DFT, MP2, and CCSD(T) levels up to the CCSD(T)/complete basis set limit level

The geometries and interaction energies of stacked and hydrogen-bonded uracil dimers and a stacked adeninecdots, three dots, centeredthymine pair were studied by means of high-level quantum chemical calculations. Specifically, standard as well as counterpoise-corrected optimizations were performed at second-order Moller-Plesset (MP2) and coupled cluster level of theory with single, double, and perturbative triple excitations [CCSD(T)] levels with various basis sets up to the complete basis set limit. The results can be summarized as follows: (i) standard geometry optimization with small basis set (e.g., 6-31G(*)) provides fairly reasonable intermolecular separation; (ii) geometry optimization with extended basis sets at the MP2 level underestimates the intermolecular distances compared to the reference CCSD(T) results, whereas the MP2/cc-pVTZ counterpoise-corrected optimization agrees well with the reference geometries and, therefore, is recommended as a next step for improving MP2/cc-pVTZ geometries; (iii) the stabilization energy of stacked nucleic acids base pairs depends considerably on the method used for geometry optimization, so the use of reliable geometries, such as counterpoise-corrected MP2/cc-pVTZ ones, is recommended; (iv) the density functional theory methods fail completely in locating the energy minima for stacked structures and when the geometries from MP2 calculations are used, the resulting stabilization energies are strongly underestimated; (v) the self-consistent charges-density functional tight binding method, with inclusion of the empirical dispersion energy, accurately reproduces interaction energies and geometries of dispersion-bonded (stacked) complexes; this method can thus be recommended for prescanning the potential energy surfaces of van der Waals complexes.