Incomplete split plot designs

We propose an incomplete split plot design where levels of one factor (say A) are applied to the wholeplots and levels of the other (say B) to subplots, and where the number of subplots in each wholeplot may be less than the number of levels of factor B.The t levels of factor A are arranged in a completely randomized design. The s levels of factor B are arranged in a connected and proper incomplete block design within each level of factor A, by considering the wholeplots as blocks.     

1/f Noise modeling of InAs/GaSb superlattice mid-wavelength infrared detectors

The empirical 1/f noise model for p\(^{+}\)-p-n infrared detector made of type-II InAs/GaSb superlattice material is presented. It is shown that 1/f noise magnitude can be accurately estimated if dark current contributions are determined and noise coefficients are known. It is found that the shunt, the bulk generation–recombination, and the trap-assisted tunneling currents contribute to the total 1/f noise. No 1/f noise connected with the diffusion and the band-to-band tunneling currents is observed.     

Structural distortions upon oxidation in heteroleptic [Cp(2)W(dmit)] tungsten dithiolene complex: combined structural, spectroscopic, and magnetic studies

Four different cation radical salts are obtained upon electrocrystallization of [Cp(2)W(dmit)] (dmit = 1,3-dithiole-2-thione-4,5-dithiolato) in the presence of the BF(4)(-), PF(6)(-), Br(-), and [Au(CN)(2)](-) anions. In these formally d(1) cations, the WS(2)C(2) metallacycle is folded along the S···S hinge to different extents in the four salts, an illustration of the noninnocent character of the dithiolate ligand. Structural characteristics and the charge distribution on atoms, for neutral and ionized complexes with various folding angles, were calculated using DFT methods, together with the normal vibrational modes and theoretical Raman spectra. Raman spectra of neutral complex [Cp(2)W(dmit)] and its salts formed with BF(4)(-), AsF(6)(-), PF(6)(-), Br(-), and [Au(CN)(2)](-) anions were measured using the red excitation (λ = 632.8 nm). A correlation between the folding angle of the metallacycle and the Raman spectroscopic properties is analyzed. The bands attributed to the C═C and C-S stretching modes shift toward higher and lower frequencies by about 0.3-0.4 cm(-1) deg(-1), respectively. The solid state structural and magnetic properties of the three salts are analyzed and compared with those of the corresponding molybdenum complexes. Temperature dependence of the magnetic susceptibility shows the presence of one-dimensional antiferromagnetic interactions in the BF(4)(-), PF(6)(-), and [Au(CN)(2)](-) salts, while an antiferromagnetic ground state is identified in the Br(-) salt below T(Ne?el) = 7 K. Interactions are systematically weaker in the tungsten salts than in the isostructural molybdenum analogs, a consequence of the decreased spin density on the dithiolene ligand in the tungsten complexes.     

Calorimetric investigations of the influence of waste aluminosilicate on the hydration of different cements

The aim of this work is to compare the influence of addition of waste aluminosilicate catalyst on the initial periods of hydration of different cements, i.e. calcium aluminate cements of different composition and Portland cement, basing on the calorimetric studies. Cement pastes containing up to 25 mass% of additive were studied, where the water/(cement+additive) ratio was 0.5. An attempt was undertaken to explain the mechanism of action of introduced aluminosilicate in the system of hydrating cement, particularly in the case of calcium aluminate cement pastes. It was found that the presence of fine-grained additive caused in all studied cases the increase of the amount of released heat in the first period after the addition of water. In the case of aluminate cements with aluminosilicate addition, a significant reduction of induction time and faster precipitation of hydration products were observed compared to the reference sample (without additive). In the experimental conditions, the additive caused the acceleration of aluminate cements hydration, and the mechanism of its action is probably complex and can encompass: nucleative action of small grains and formation of new chemical compounds.     

FTIR characterization of the reactive interface of cobalt oxide nanoparticles embedded in polymeric matrices

Fourier transform infrared spectroscopy (FTIR) was used as a novel characterization method to determine the properties of the interface that developed when cobalt oxide nanoparticles were self-assembled in a poly(methyl methacrylate) (PMMA) matrix. The method employed the distinct changes that were observed in the infrared spectra of the polymer upon adsorption onto the cobalt oxide nanoparticles, allowing a quantitative determination of the average number of contact points that the average polymer chain formed with the surface of a cobalt oxide nanoparticle of average size. The results obtained with this method compared favorably to those obtained by the coupling of transmission electron microscopy (TEM) experiments with thermogravimetric analysis (TGA). On the basis of both methods, we concluded that the interfacial region created between the cobalt oxide nanoparticles and PMMA is extremely sensitive to the chain length, i.e., the number of anchor points and the density of the polymer layer increase with chain molecular weight. At molecular weights of approximately 250,000, the density of the polymer layer saturates at a value that correspond to that of very thin PMMA films.     

Sensitive adsorptive stripping voltammetric procedure of Imatinib determination in spiked urine samples using solid lead microelectrode

This article reports for the first time the application of solid lead microelectrode for organic compound determination. The proposed sensor was used for anticancer drug Imatinib quantification by adsorptive stripping voltammetry. Procedure of Imatinib determination was developed utilizing advantages ensured by solid lead microelectrode: reusability and durability for a long period of time and its ecological character as compared to film electrodes. The detection limit of Imatinib determination was calculated to be 1.9 × 10⁻¹⁰ mol L⁻¹. The analytical usability of the developed procedure was confirmed by acceptable recoveries of Imatinib determination in spiked urine samples.     

On a new type of distance Fibonacci numbers

In this paper, we define a new kind of Fibonacci numbers generalized in the distance sense. This generalization is related to distance Fibonacci numbers and distance Lucas numbers, introduced quite recently. We also study distinct properties of these numbers for negative integers. Their representations and interpretations in graphs are also studied.