Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy

This article presents a new methodology for the quantitative determination of the progress of the curing reaction of a thermosetting resin, using the results of electrical impedance spectroscopy. The method is an extension of the use of the imaginary impedance maximum as a reaction progress indicator and is based on the demonstration of a close correlation between the reaction rate, as measured by conventional differential scanning calorimetry, and the rate of change of the value of the imaginary impedance spectrum maximum. Tests on a commercial aerospace epoxy resin under both isothermal and dynamic heating conditions with calorimetry and impedance spectroscopy have demonstrated the validity of the method and set the accuracy limits involved. This technique can be used as a real-time online control tool for thermoset composite manufacturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 146–154, 2004     

Aluminum(III) complexes containing O,O chelating ligand

The stoichiometric reactions of trimethylaluminum with 2,6‐(MeOCH₂)₂C₆H₃OH (LH) revealed compounds L₃Al ( 1 ) and L₂AlMe ( 2 ). On the other hand reaction of 1 equiv. of LH with trimethylaluminum did not lead to the formation of complex LAlMe₂ ( 3 ), rather 2 together with Me₃Al were observed as a result of a disproportionation of 3 . Compounds 1 and 2 were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy and in the case of 1 by X‐ray diffraction. Derivative 2 underwent transmetalation with Ph₃SnOH, giving LSnPh₃ ( 4 ) as the result of a migration of ligand L from the aluminum to the tin atom. The identity of 4 was established by elemental analysis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and ¹H, ¹¹⁹Sn HMBC experiments. The system 2 and B(C₆F₅)₃ in a 1:1 molar ratio was shown to be active in the polymerization of propylene oxide and ε‐caprolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

Unbiased expectation values from diffusion quantum Monte Carlo simulations with a fixed number of walkers

We append forward walking to a diffusion Monte Carlo algorithm which maintains a fixed number of walkers. This removes the importance sampling bias of expectation values of operators which do not commute with the Hamiltonian. We demonstrate the effectiveness of this approach by employing three importance sampling functions for the hydrogen atom ground state, two very crude. We estimate moments of the electron-nuclear distance, static polarizabilities, and high-order hyperpolarizabilites up to the fourth power in the electric field, where no use is made of the finite field approximation. The results agree with the analytical values, with a statistical error which increases substantially with decreasing overlap of the guiding function with the exact wave function.     

Copper Binding and Oligomerization Studies of the Metal Resistance Determinant CrdA from Helicobacter pylori

Within this research, the CrdA protein from Helicobacter pylori (HpCrdA), a putative copper-binding protein important for the survival of bacterium, was biophysically characterized in a solution, and its binding affinity toward copper was experimentally determined. Incubation of HpCrdA with Cu(II) ions favors the formation of the monomeric species in the solution. The modeled HpCrdA structure shows a conserved methionine-rich region, a potential binding site for Cu(I), as in the structures of similar copper-binding proteins, CopC and PcoC, from Pseudomonas syringae and from Escherichia coli, respectively. Within the conserved amino acid motif, HpCrdA contains two additional methionines and two glutamic acid residues (MMXEMPGMXXMXEM) in comparison to CopC and PcoC but lacks the canonical Cu(II) binding site (two His) since the sequence has no His residues. The methionine-rich site is in a flexible loop and can adopt different geometries for the two copper oxidation states. It could bind copper in both oxidation states (I and II), but with different binding affinities, micromolar was found for Cu(II), and less than nanomolar is proposed for Cu(I). Considering that CrdA is a periplasmic protein involved in chaperoning copper export and delivery in the H. pylori cell and that the affinity of the interaction corresponds to a middle or strong metal–protein interaction depending on the copper oxidation state, we conclude that the interaction also occurs in vivo and is physiologically relevant for H. pylori.     

Dynamic polarizability,dispersion coefficient C6 and dispersion energy in the effective fragment potential method

The development of a fragment–fragment dispersion energy expression, for the general effective fragment potential (EFP2) method is presented. C₆ dispersion coefficients, expressed in terms of the dynamic polarizabilties over the imaginary frequency range (α(iν)), were calculated for a set of homo and hetero dimers. Using these coefficients the dispersion energy has been calculated. The dispersion energy is expressed using a simple London series expansion terminated after the n=6 term and implemented using distributed localized molecular orbitals (LMOs). The EFP2 dispersion energy is compared to symmetry adapted perturbation theory (SAPT) values. From this comparison, it is apparent that one needs to include higher order terms in the dispersion energy. Adding an estimated C₈ term to the C₆ energy greatly improves the agreement with the benchmark SAPT energies.     

Sonochemical effectiveness factor (eUS) in the reactors for wastewater treatment by sono-Fenton oxidation: Novel considerations

A comprehensive algorithm was recently proposed for calculation of the sonochemical effectiveness factor and wastewater treatment modeling. The presented approach implies that ultrasound is an auxiliary source of free radicals in Fenton type reactions; introduction of ultrasound represents an enhancement of pollutant degradation rates. The sonochemical effectiveness factor was introduced in kinetic models as the e_US factor (Gr?i? et al., 2012 [1]). As a substantial follow-up, this study presents novel considerations. The e_US factor was modeled as a function of employed frequency, actual cavitation-related power intensity of ultrasound and a portion of the cavitationally active zone, i.e. dimensionless active volume. The effect of temperature was disregarded in the present model considerations. Cavitationally active zone in reactors was determined based on the erosion of aluminum foil, resulting in cone-shaped space arising from transducer.In the present study, sonochemical treatment of industrial wastewater containing HCOONa as organic pollutant was performed using different equipment: ultrasonic baths (UB1, UB2 and UB3), cylindrical reactor with homogenizer (HCR) and three-frequency hexagonal cell, i.e. ultrasonic pilot reactor prototype (PP). Explored frequency range was from 20 to 120 kHz. Homogeneous and heterogeneous Fenton-type sonochemical processes, US/Fe(II)(FeSO₄,aq.)/H₂O₂ and US/Fe(II)(steel-plate)/H₂O₂, respectively, applied to industrial wastewater were investigated in terms of mineralization kinetics. Newly modeled e_US factor was introduced in corresponding kinetic models and the overall model was validated. Kinetic parameters of Fenton process were treated as independent of ultrasound, since e_US factor consists of cavitation-related phenomena responsible for the mineralization rate enhancement. In average, a 21% increase of mineralization efficiency was achieved using a single frequency, while more than 70% increase can be achieved by combining 20, 68 and 120 kHz in PP.     

Itaconic acid hybrids as potential anticancer agents

Molecular Diversity - In this paper, we report the synthesis of novel hybrids 2–14 based on itaconic acid and fluoroaniline, pyridine, indole and quinoline scaffolds. Itaconic acid is a...     

Evolution of dust shells in Tolman–Bondi space–time according to the Weierstrass approach

The Einstein evolution of a dust shell universe with spatial spherical symmetry is analyzed. The implicit and parametric solutions of Tolman–Bondi equations are proposed in order to show its agreement with the rectilinear solutions of Kepler’s problem. Finally, a complete systematization of Tolman–Bondi models is obtained through the classical Weierstrass approach.     

Generalization of the stabilization method for green functions and quantum resonances

The stabilization method provides an efficient approach to many problems in atomic and molecular dynamics. Real avoided crossings and smoothing techniques provide the relevant information to compute real density of states. The aim of this letter is to present an extension of the stabilization method that allows for a direct determination of full Green functions and resonance energies. The method is based on the use of optical potentials and perturbation theory. Real avoided crossings of the original stabilization method become complex and resonance energies appear to stabilize in the complex-energy plane. A numerical illustration is presented for a simple model of shape resonance. Accurate results are obtained with a small number of real square-integrable functions as in the original stabilization method. The computational efficiency of the approach and its generality are emphasized.