Moisturizing emulsion systems based on the novel long-chain alkyl polyglucoside emulsifier

Mesomorphic behavior of the novel long-chain alkyl polyglucoside emulsifier comprising arachidyl alcohol (C₂₀), behenyl alcohol (C₂₂), and arachidyl glucoside was investigated in order to determine the prevalent stabilization mechanism and moisturizing capacity of emulsion systems based on it. For this to be accomplished thermoanalytical methods (differential scanning calorimetry and thermogravimetric analysis) coupled with microscopy, rheological, X-ray diffraction methods and a short-term in vivo study of skin hydration level were performed. Obtained results have proved that C₂₀/C₂₂ alkyl polyglucoside mixed emulsifier is able to provide the synergism between the two main types of lamellar phases, the liquid-crystalline (Lα), and the gel crystalline (Lβ) one, building the emulsion systems of different stability and performance. Formation of lamellar structures influenced for more than one half of water within the system to be entrapped. Conducted investigation of hydration potential in real-time conditions provided valuable information on the investigated emulsion vehicles’ moisturizing potential as well as their contribution to the skin barrier improvement. Therefore, it could be expected that emulsions based on this alkyl polyglucoside emulsifier could influence the delivery of active ingredients of both the lipophilic and hydrophilic type. The employment of thermoanalytical methods in our work suggests the possibility for thermal methods to be used more frequently in the characterization of both the novel raw materials and the belonging emulsion systems.     

Green chromatography separation of analytes of greatly differing properties using a polyethylene glycol stationary phase and a low-toxic water-based mobile phase

A simple, rapid, and environmentally friendly HPLC method was developed and validated for the separation of four compounds (4-aminophenol, caffeine, paracetamol, and propyphenazone) with different chemical properties. A “green” mobile phase, employing water as the major eluent, was proposed and applied to the separation of analytes with different polarity on polyethylene glycol (PEG) stationary phase. The chromatography separation of all compounds and internal standard benzoic acid was performed using isocratic elution with a low-toxicity mobile phase consisting of 0.04 % (v/v) triethylamine and water. HPLC separation was carried out using a PEG reversed-phase stationary phase Supelco Discovery HS PEG column (15?×?4 mm; particle size 3 μm) at a temperature of 30 °C and flow rate at 1.0 mL min^?1. The UV detector was set at 210 nm. In this study, a PEG stationary phase was shown to be suitable for the efficient isocratic separation of compounds that differ widely in hydrophobicity and acid–base properties, particularly 4-aminophenol (log P, 0.30), caffeine (log P, ?0.25), and propyphenazone (log P, 2.27). A polar PEG stationary phase provided specific selectivity which allowed traditional chromatographic problems related to the separation of analytes with different polarities to be solved. The retention properties of the group of structurally similar substances (aromatic amines, phenolic compounds, and xanthine derivatives) were tested with different mobile phases. The proposed green chromatography method was successfully applied to the analysis of active substances and one degradation impurity (4-aminophenol) in commercial preparation. Under the optimum chromatographic conditions, standard calibration was carried out with good linearity correlation coefficients for all compounds in the range (0.99914–0.99997, n?=?6) between the peak areas and concentration of compounds. Recovery of the sample preparation was in the range 100?±?5 % for all compounds. The intraday method precision was determined as RSD, and the values were lower than 1.00 %.

Qualitative and quantitative analysis of the unsaponifiable fraction of vegetable oils by using comprehensive 2D GC with dual MS/FID detection

The present investigation is focused on the development of a comprehensive two-dimensional GC (GC?×?GC) method, with dual MS/FID detection, for the qualitative and quantitative analysis of the entire unsaponifiable fraction of vegetable oils. The unsaponifiable fraction forms a minor, highly specific part of a vegetable oil, and can be used as an indicator of genuineness. The column set used consisted of a low-polarity first dimension, and a medium-polarity secondary one, both characterized by a high thermal stability. The use of dual detection enabled the attainment of both mass spectral information and relative % FID data. The complexity of the fingerprint, generated by the unsaponifiable fraction, fully justified the employment of the two-dimensional GC technology. Furthermore, two other GC?×?GC benefits contributed greatly to the attainment of promising results, namely sensitivity enhancement and the formation of group-type patterns. The method herein proposed could potentially open a new opportunity for the more in-depth knowledge of the unsaponifiable fraction of vegetable oils.     

Determination of 129I in biomonitors collected in the vicinity of a nuclear power plant by neutron activation analysis

Neutron activation analysis (NAA) was used to determine ¹²⁹I and the ¹²⁹I/¹²⁷I ratio in bovine thyroid, moss, and river sediment samples collected in the vicinity of the Temelín nuclear power plant (NPP) in south Bohemia. The NAA procedures comprised pre-irradiation separation of ¹²⁹I by combustion of the samples in the stream of oxygen at 1,000 °C and trapping the liberated iodine in a LiOH/(NH₄)₂SO₃ solution. Post-irradiation separation of ¹³⁰I produced by the reaction ¹²⁹I(n,γ)¹³⁰I was carried out by extraction of elementary iodine with chloroform followed by precipitation of PdI₂. Nondestructive, epithermal NAA was used to determine ¹²⁷I employing the ¹²⁷I(n,γ)¹²⁸I reaction. The results showed that mean values of ¹²⁹I and the ¹²⁹I/¹²⁷I ratio in the bovine thyroids varied from 22 to 61 mBq kg^?1 (dry mass) and 2.8 × 10^?9 to 5.4 × 10^?9, respectively. These values are close to the lower end of results reported from various regions non-polluted with ¹²⁹I. No significant differences were found between ¹²⁹I concentrations and the ¹²⁹I/¹²⁷I ratios in the bovine thyroids collected prior to the start and after several years of operation of the NPP. The mean value and standard deviation of ¹²⁹I in mBq kg^?1, dry mass and the ¹²⁹I/¹²⁷I ratio in moss Pleurozium schreberi were 23 ± 16 and 2.3 × 10^?9, respectively, whereas values of ¹²⁹I in the river sediments were below 8–10 mBq kg^?1 (dry mass) after several years of the NPP operation.     

Recognition of chiral anions using calix[4]arene-based ureido receptor in the 1,3-alternate conformation

A new type of calixarene-based receptor designed for the recognition of chiral anions was prepared by the introduction of (S)-2-methylbutan-1-ol moieties into the lower rim of calixarene. The immobilization of calixarene skeleton in the 1,3-alternate conformation enabled the construction of a cavity consisting of preorganised ureido functions and chiral substituents in close proximity. This cavity is capable of chiral discrimination of selected anions as demonstrated on d- and l-phenylalaninates.     

聚焦形貌恢复方法模型设计

采用基于拉普拉斯算符聚焦形貌恢复方法,提出了模拟目标深度测量的数值模型。数值模拟的核心是基于通过几何光学预测的理想图像的卷积与透镜广义孔径函数的多色点扩散函数,即用聚焦误差替代抛物线圆柱形貌或高斯函数。该模型可以使用基于聚焦形貌恢复方法的传感器真实组件参数、光源光谱、光学系统离差、相机的光谱灵敏度。提出了光学系统离差（消球差、消色差、色差）对确定目标表面形貌的精确度和可靠性的影响。结果表明,该模型可以有效提高实验效率,缩短时滞,降低成本。     

Structural Elucidation of an Atropisomeric Entcassiflavan-(4β→8)-Epicatechin Isolated from Dalbergia monetaria L.f. Based on NMR and ECD Calculations in Comparison to Experimental Data

A rare dihydoxyflavan-epicatechin proanthocyanidin, entcassiflavan-(4β→8)-epicatechin, was isolated from Dalbergia monetaria, a plant widely used by traditional people from the Amazon to treat urinary tract infections. The constitution and relative configuration of the compound were elucidated by HR-MS and detailed 1D- and 2D-NMR measurements. By comparing the experimental electronic circular dichroism (ECD) spectrum with the calculated ECD spectra of all 16 possible isomers, the absolute configuration, the interflavan linkage, and the atropisomers could be determined.     

Microporosity of a Guanidinium Organodisulfonate Hydrogen‐Bonded Framework

Guanidinium organosulfonates (GSs) are a large and well‐explored archetypal family of hydrogen‐bonded organic host frameworks that have, over the past 25 years, been regarded as nonporous. Reported here is the only example to date of a conventionally microporous GS host phase, namely guanidinium 1,4‐benzenedisulfonate ( p ‐G₂BDS ). p ‐G₂BDS is obtained from its acetone solvate, AcMe@ G₂BDS , by single‐crystal‐to‐single‐crystal (SC‐SC) desolvation, and exhibits a Type I low‐temperature/pressure N₂ sorption isotherm (SA_BET=408.7(2) m² g^?1, 77 K). SC‐SC sorption of N₂, CO₂, Xe, and AcMe by p ‐G₂BDS is explored under various conditions and X‐ray diffraction provides a measurement of the high‐pressure, room temperature Xe and CO₂ sorption isotherms. Though p ‐G₂BDS is formally metastable relative to the “collapsed”, nonporous polymorph, np ‐G₂BDS , a sample of p ‐G₂BDS survived for almost two decades under ambient conditions. np ‐G₂BDS reverts to zCO₂@ p ‐G₂BDS or yXe@ p ‐G₂BDS (y,z=variable) when pressure of CO₂ or Xe, respectively, is applied.     

Versatile post-functionalisation strategy for the formation of modular organic–inorganic polyoxometalate hybrids

Hybrid structures incorporating different organic and inorganic constituents are emerging as a very promising class of materials since they synergistically combine the complementary and diverse properties of the individual components. Hybrid materials based on polyoxometalate clusters (POMs) are particularly interesting due to their versatile catalytic, redox, electronic, and magnetic properties, yet the controlled incorporation of different clusters into a hybrid structure is challenging and has been scarcely reported. Herein we propose a novel and general strategy for combining multiple types of metal-oxo clusters in a single hybrid molecule. Two novel hybrid POM structures (HPOMs) bis-functionalised with dipentaerythritol (R–POM₁–R; R = (OCH₂)₃CCH₂OCH₂C(CH₂OH)) were synthesised as building-blocks for the formation of heterometallic hybrid triads (POM₂–R–POM₁–R–POM₂). Such a modular approach resulted in the formation of four novel heterometallic hybrids combing the Lindqvist {V₆}, Anderson–Evans {XMo₆} (X = Cr or Al) and trisubstituted Wells–Dawson {P₂V₃W₁₅} POM structures. Their formation was confirmed by multinuclear Nuclear Magnetic Resonance (NMR), infrared (IR) and UV-Vis spectroscopy, as well as Mass Spectrometry, Diffusion Ordered Spectroscopy (DOSY) and elemental analysis. The thermal stability of the hybrids was also examined by Thermogravimetric Analysis (TGA), which showed that the HPOM triads exhibit higher thermal stability than comparable hybrid structures containing only one type of POM. The one-pot synthesis of these novel compounds was achieved in high yields in aqueous and organic media under simple reflux conditions, without the need of any additives, and could be translated to create other hybrid materials based on a variety of metal-oxo cluster building-blocks.

A versatile modular approach has been developed for incorporating different metal-oxo nanoclusters with characteristic structures into a single hybrid molecule by covalently linking them with polyol ligands.