Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression

Time-resolved laser-induced plasma spectrometry for determination of minor elements in steelmaking process samples

A pulsed Nd:YAG laser operating on the fourth (266 nm) and second (532 nm) harmonics has been used to generate plasmas on the target surface in air at atmospheric pressure. The influence of wavelength on quantitative analysis of 4 minor elements in stainless steel samples (Si, Ti, Nb and Mo) was investigated. Stainless steel samples with different elemental concentrations were prepared and analyzed by laser-induced plasma spectrometry (LIPS). The effect of laser wavelength on analytical figures of merit (calibration curves, correlation coefficients, linear dynamic ranges, analytical precision, and accuracy values) was found to be negligible when internal standardization (an Fe line) and time-resolved laser-induced plasma are employed. For both wavelengths, the calibration curves presented a good linearity and an acceptable linear dynamic range in the concentration interval investigated. For the four elements studied, limits of detection lower than 150 microg g(-1) were achieved. To evaluate the influence of wavelength on precision and accuracy, a set of fifteen high-alloyed steel samples from different stages of steelmaking process have been analyzed. Finally, the long-term stability of the analytical measurements for Mo with 532 nm wavelength has been discussed. RSD values were lower than 5.3% for the elements studied.     

Two-state irreversible thermal denaturation of anionic peanut (Arachis hypogaea L.) peroxidase

Detailed differential scanning calorimetry (DSC), steady-state tryptophan fluorescence and far-UV circular dichroism (CD) studies, together with enzymatic assays, were carried out to monitor the thermal stability of anionic peanut peroxidase (aPrx) at pH 3.0. The spectral parameters were seen to be good complements to the highly sensitive but integral method of DSC. Thus, changes in far-UV CD corresponded to changes in the overall secondary structure of the enzyme, while changes in intrinsic tryptophan fluorescence emission corresponded to changes in the tertiary structure of the enzyme. The results, supported with data concerning changes in enzymatic activity with temperature, show that thermally induced transitions for aPrx are irreversible and strongly dependent upon the scan rate, suggesting that denaturation is under kinetic control. It is shown that the process of aPrx denaturation can be interpreted with sufficient accuracy in terms of the simple kinetic scheme, , where k is a first-order kinetic constant that changes with temperature, as given by the Arrhenius equation; N is the native state, and D is the denatured state. On the basis of this model, the parameters of the Arrhenius equation were calculated.     

Relating Total π-Electron Energy and Resonance Energy of Benzenoid Molecules with Kekulé- and Clar-Structure-Based Parameters

Within classes of isomeric benzenoid hydrocarbons various Kekulé- and Clar-structure-based parameters (Kekulé structure count, Clar cover count, Herndon number, Zhang–Zhang polynomial) are all mutually correlated. This explains why both the total π-electron energy (E), the Dewar resonance energy (DRE), and the topological resonance energy (TRE) are well correlated with all these parameters. Nevertheless, there exists an optimal value of the variable of the Zhang–Zhang polynomial for which it yields the best results. This optimal value is negative-valued for E, around zero for TRE, and positive-valued for DRE. A somewhat surprising result is that TRE and DRE considerably differ in their dependence on Kekulé- and Clar-structure-based parameters.     

Mercury(II) mediated cyclisation of R-1-(1′-hydroxyethyl)-2-(1″-propenyl)-3-alkoxy-4-methoxybenzenes to chiral isochromanes

A protocol has been established for the transformation of chiral ortho 1-hydroxyethyl propenyl benzenes under both anaerobic and oxidative mercury(II) mediated conditions to produce chiral isochromanes. Further transformations of the former products yielded chiral isochromanquinones, while the latter afforded the corresponding chiral 4-hydroxyisochromanquinones.     

Perturbation theory for open-shell systems: Simulation of the UHF states by means of the perturbed RHF wave functions

Second-, third-, and selected fourth-order contributions to the correlation energy were calculated for a series of simple open-shell systems by means of the previously developed double-perturbation theory in the restricted MO formalism. It was found possible to assign some of the diagrams to self-consistency effects and to approximate in this way the E – E energy difference. A comparison is made with a more rigorous approach, in which the UHF ground-state wave function is expressed as a first-order perturbation expansion based on the RHF reference wave function. Distinguishing between “self-consistency” and “correlation” diagrams for open-shell systems in the RHF formulation represents a special case of a more general problem met in any double-perturbation treatment, such as, e.g., treatments of systems in the external field or perturbation expansions with noncanonical orbitals.     

Rh(III), Pd(II), Pt(IV) and Au(III) complexes of 2-thiopyrimidine derivatives

Some news thiopyrimidine derivatives and complexes [4-amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidine (TANH), its 2-methylthio derivative (MTH), the ammonium salt ofTANH (sTANH) and six new complexes of formulas: Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃ Pd(TANH)₂Cl₂ and Au(TAN ^–)Cl] have been synthesized and characterized by elemental analysis, IR and¹H-NMR spectroscopy techniques. The thermal behaviour of all compounds has also been studied.

---

Rh(III), Pd(II), Pt(IV) und Au(III) Komplexe von 2-Thiopyrimidin Derivaten

Zusammenfassung Es wurden einige neue Thiopyrimidinderivate und deren Komplexe synthetisiert und mittels Elementaranalyse, IR und¹H-NMR charakterisiert: 4-Amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidin (TANH), dessen 2-Methylthio-Derivat (MTH), das Ammoniumsalz vonTANH (sTANH) und sechs neue Komplexe der Formeln Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃, Pd(TANH)₂Cl₂ und Au(TAN ^–)Cl. Das thermische Verhalten der Verbindungen wurde ebenfalls untersucht.

     

Amperometric determination of hydrogen peroxide with a manganese dioxide film-modified screen printed carbon electrode

A carbon thick film electrode modified with an MnO₂-film is investigated as an amperometric detector for hydrogen peroxide in flow-injection analysis (FIA). At an operating potential of +0.48 V vs. Ag/AgCl catalytic oxidation of the analyte is exploited for amperometric monitoring. Experimental parameters, such as pH of the carrier, working potential, flow rate and injection volume, are optimized. The amperometric signals are linearly proportional to the concentration of H₂O₂ in the range from 0.005 to 10 mg/L, showing a detection limit (3σ) of 2.3 μg/L. The method is applied to the determination of H₂O₂ in rain water and to a simple assay to quantify glucose in human plasma.     

Cyclic Conjugation Energy Effects in Polycyclic π-Electron Systems

Summary. The fact that cyclic arrangements of double bonds have a dramatic effect on the behavior of conjugated organic molecules is known since the 19th century. The fact that in monocyclic conjugated systems the size of the cycle and the number of -electrons involved is decisive for their stability (aromaticity) or lack of stability (antiaromaticity) is known since the 1930s. In polycyclic -electron systems several cyclic effects are present simultaneously and their separation became possible only recently. A molecular orbital method has been elaborated, by means of which the energy effects of individual cycles in polycyclic -electron systems can be estimated. This method is briefly outlined and illustrated by pertinent examples. An exhaustive bibliography of the topic considered is given.     

Multicanonical schemes for mapping out free-energy landscapes of single-component and multicomponent systems

Multicanonical (MUCA) sampling is a powerful approach for simulating large domains of thermodynamic macrostate space that relies on mapping out either the density of states or a free energy of the system as a function of a suitable "order parameter." The purpose of this study is to extend and apply to more complex systems the method introduced in a previous paper [M. K. Fenwick and F. A. Escobedo, J. Chem. Phys. 120, 3066 (2004)] that uses Bennett's acceptance ratio method for estimating MUCA free energies. Four types of MUCA schemes are considered according to what order parameter is adopted and how the macrostate space is traversed: a la grand canonical ensemble, a la semigrand canonical ensemble, a la semigrand isothermal-isobaric ensemble, and a la isothermal-isobaric ensemble. Two types of systems are studied, the first is a two-component Lennard-Jones mixture that exhibits a vapor-liquid transition, and the second is a hard-cuboid containing system that exhibits an isotropic-liquid crystalline transition. These systems are simulated with different MUCA schemes and the resulting free-energy profiles are used to determine phase-coexistence conditions. For the Lennard-Jones systems, it is also demonstrated that different types of MUCA simulations can be conveniently performed over different macrostate regions and the results can be subsequently pieced together into a continuous weighting function.